IntelBurnTest - The new stress-testing program

[Gomnadz]

How much memory should be used for the test and how many loops?

from the OP/1st post, you got to scroll down and it will say....

2. Use the most available RAM possible (IntelBurnTest can now do this on
its own automatically). The more memory it uses, the more accurate.
However, most people can use "Standard" mode as it should be sufficient.
3. Select the run # (should use at least 5 at minimum, no more than 20).

[pman26]

I have a Llano mobile chip.
This cpu allows me to change cpu multiplier, while everything else remains stock.

I want to use IBT to test cpu only, minimal ram.

If I set custom to 128 MB, and let it run for several hours, will that give me a good cpu-only test ?
I did a short run of 20 times, and it did peg the cpu at 100% load, so running for a few hours should be good ?

[shimmishim]

Thanks. I didn't make it quite that far down.

from the OP/1st post, you got to scroll down and it will say....

2. Use the most available RAM possible (IntelBurnTest can now do this on
its own automatically). The more memory it uses, the more accurate.
However, most people can use "Standard" mode as it should be sufficient.
3. Select the run # (should use at least 5 at minimum, no more than 20).

[Gomnadz]

lol, done that before.......

Thanks. I didn't make it quite that far down.