I am getting lock ups while gaming with my new cards. Is there a voltage I need to bump up to run to OC'd 7970's? I just want to rule out issues here. I have tried both cards solo, diff slots etc.
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
Little question: when Asus AI suite tells me the voltage is set at 1.37v, but then AIDA says it's 1.42v... Which should I believe?
9900k @ 5.1Ghz
Asus Maximus Hero XI
32GB (8 x 4) Gskill @4000
Strix 2080 Ti OC
OS & Apps: Samsung 970 Pro 512GB
Games: Samsung 970 Pro 1TB
Storage: Crucial M500 2TB
Seasonic Platinum 1000W
Phanteks Evolv X
9900k @ 5.1Ghz
Asus Maximus Hero XI
32GB (8 x 4) Gskill @4000
Strix 2080 Ti OC
OS & Apps: Samsung 970 Pro 512GB
Games: Samsung 970 Pro 1TB
Storage: Crucial M500 2TB
Seasonic Platinum 1000W
Phanteks Evolv X
never mind..
Last edited by xpower; 04-11-2014 at 04:27 AM.
[FSB<>BCLK]
3930k@4.3Ghz 1.30v HT On 24/7 Full load Linx stable/Lapped~Strix 6600xt~970evo~Gt110
R4Gene Modded Bios~Corsair 2x8Gb@2.4Ghz 1.65v C11~AX1200i
SORRY FOR MY BAD ENGLISH
[3960X 4.8GHz 1.35v] [32GB G.Skill Ripjaws 2133] [EVGA GTX 680 SLI] [ASUS RIVE] [Samsung Spinpoint F1 1TB R0]
[EK Supreme HF] [EK RIVE Full Board Kit] [Coolgate 120.3 + 120.1] [4 x Scythe GT D1225C12B5AP-15] [BitsPower Compression] [MCP655]
[3 x Acer S231HL LED 5760 x 1080 2d Surround]
Can some please post a simple 4.8~5Ghz OC guide ? i am really confused with all the motherboard settings.
Gaming rig;
ASUS RAMPAGE IV BLACK EDITION
I7-4390K
G.SKILL Trident X 16GB 2400
Intel 530 240GB
2x Asus GTX780
Corsair AX1200
HP ZR30w 30
Win 8.1 pro
Sound rig;
Auzen X-Fi H.T. HD --> Yulong D100 MKII --> D-7100
Oclock.pngThis is for my 3820: Go to CPU Performance Settings. Set CPU Ratio to 39. Disable SoeedStep. Go back to the first menu, Set Ratio again to 39. BCLK to 125 & look at the RAM Speed & choose your prefered clocks. Look down to the CPU Voltages & pick something higher than stock.
Hope this help
[SIGPIC][/SIGPIC]
This is funny because I've been telling people pretty much the same thing. The board does a great job with most UEFI settings just set to AUTO. Aside from setting XMP for memory if needed, not much else needed. Of course custom tweaking gets you further.
Here is a good guide for further tweaking:
http://www.xtremesystems.org/forums/...r-Overclocking
9900k @ 5.1Ghz
Asus Maximus Hero XI
32GB (8 x 4) Gskill @4000
Strix 2080 Ti OC
OS & Apps: Samsung 970 Pro 512GB
Games: Samsung 970 Pro 1TB
Storage: Crucial M500 2TB
Seasonic Platinum 1000W
Phanteks Evolv X
Thank you BigRigDriver, i know these setting its easy, what i meant is this complicated settings,
================================================== =============
>DIGI+ Power Control
CPU VCore
CPU Load-line Calibration
CPU Current Capability
CPU Voltage Frequency
CPU Fixed Frequency
VRM Over Temperature Protection
CPU Power Duty Control
Vcore MOS volt. Control
CPU Power Phase Control
CPU VCORE Boot Up Voltage
CPU VSA
VCCSA Load-line Calibration
VCCSA Current Capability
VCCSA Fixed Frequency
CPU VCCSA Boot Up Voltage
CPU VTT
CPU VTT Switching Freq
CPU VTT Over-Current Protection
DRAM Voltage
DRAM-AB Current Capability
DRAM-AB Voltage Frequency
DRAM-AB Fixed Frequency Mode
DRAM-AB Power Phase Control
DRAM-CD Current Capability
DRAM-CD Voltage Frequency
DRAM-CD Fixed Frequency Mode
DRAM-CD Power Phase Control
PCH 1.1V
PCH 1.1V Switching Freq
================================================== =============
Extreme OV
BCLK Skew
CPU VCORE Voltage
CPU VCORE Manual Voltage
VTT CPU Voltage
2nd VTTCPU Voltage
CPU VCCSA Voltage
CPU VCCSA Manual Voltage
DRAM Voltage (CHA, CHB)
DRAM Voltage (CHC, CHD)
CPU PLL Voltage
PCH 1.1v Voltage
VTTDDR Voltage (CHA, CHB)
VTTDDR Voltage (CHC, CHD)
CPU Spread Spectrum
PCIE Spread Spectrum
LardArse, man you method work like magic
1.PNG
Do you have another easy way to push my memory to 2400Mhz ? and what timing (original timing 9-11-10-28) ?
Gaming rig;
ASUS RAMPAGE IV BLACK EDITION
I7-4390K
G.SKILL Trident X 16GB 2400
Intel 530 240GB
2x Asus GTX780
Corsair AX1200
HP ZR30w 30
Win 8.1 pro
Sound rig;
Auzen X-Fi H.T. HD --> Yulong D100 MKII --> D-7100
Thank you very much man, i used this
F5
set 48x
set 2400 dram freq
DRAM Timing control 'Load Hynix profile' - yes
save exit
And its work very well
2.PNG
one more thing please, can i push to 5Ghz with the same easy way ?
Also can I tighten more the memory timing ? what timing i can set ?
I use 0013 bios .
Gaming rig;
ASUS RAMPAGE IV BLACK EDITION
I7-4390K
G.SKILL Trident X 16GB 2400
Intel 530 240GB
2x Asus GTX780
Corsair AX1200
HP ZR30w 30
Win 8.1 pro
Sound rig;
Auzen X-Fi H.T. HD --> Yulong D100 MKII --> D-7100
Raja or Shamino, any idea what's up with the ROG forums?? It's been down since Friday night
9900k @ 5.1Ghz
Asus Maximus Hero XI
32GB (8 x 4) Gskill @4000
Strix 2080 Ti OC
OS & Apps: Samsung 970 Pro 512GB
Games: Samsung 970 Pro 1TB
Storage: Crucial M500 2TB
Seasonic Platinum 1000W
Phanteks Evolv X
5Ghz
3.jpg
I have only one concern about this way to OC, it is the very high Vcore (1.56), which increase the temp.
I can see some guys can do 5Ghz with only 1.43~1.45V.
Gaming rig;
ASUS RAMPAGE IV BLACK EDITION
I7-4390K
G.SKILL Trident X 16GB 2400
Intel 530 240GB
2x Asus GTX780
Corsair AX1200
HP ZR30w 30
Win 8.1 pro
Sound rig;
Auzen X-Fi H.T. HD --> Yulong D100 MKII --> D-7100
New toy to play with for a while.
Uploaded with ImageShack.us
160 bclk always looks nice but won't push 3820 to any new highscores...125er strap seem to run better...
3820 is like 2600K on pcie-steroids...not more...
| '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
| '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
| '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67
| '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
| '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
| '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
| '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled
| '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW
Originally Posted by saaya
Something to play with until IB comes out though. Im actually testing memory kits, I knew the chip was good for 160+.
Uploaded with ImageShack.us
Last edited by OC Nub; 03-12-2012 at 08:02 PM.
Another New BIOS 0015
http://www.datafilehost.com/download-3f35ecb6.html
Improved DRAM OC (specially 2Dimm /channel) at least for me
First OC on new 3930K C2 and RIVE (0013) & custom WC loop. Good ? Bad ? Average ? I just keep chanting in my head "don't run prime, don't run prime"... ;-) Aida stability test at 45 mins at this point, gonna call an hour good since this thing does SP32M, CineBench, and SpecAPC for Lightwave without a hitch (and fast as hell).
I7-3930K @ 4.8Ghz (1.35) / R4E / 16GB Samsung LV @ 2133 (1.38V) / Crucial M4 128GB / Caviar Black 1TB / HD6850 / Corsair AX850 / MCP355->RX360->SR1-360->XSPC Raystorm->EK-R4E-LE / DD Double-Wide Horizontal
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
Bookmarks