hipro dont u wanna make ur own memory PCB?![]()
hipro dont u wanna make ur own memory PCB?![]()
E5200
Asus P5Q-VM
A-DATA 2x2GB
Zotac 8800GT
500W Seasonic
Originally Posted by trakslacker
Man, hipro, I'd really like to know if some "ordinary" BH-6 can outperform my KHX![]()
![]()
Last edited by SAE; 07-30-2004 at 11:10 AM.
Awesome Hipro...pencil me in for a few 512 sticks.![]()
This has to be just about the hottest thread I've seen in a long time haha.
P4C 3.2Ghz @ 4.2Ghz 1.8v (Vapo LS + 4 Tornados & 2xNexus)
AIW X800XT Running Stock
IC7-G w/ 2x 512MB KHX3000 (BH-5) + 2x 512MB Muskin Redline XP4000 BIOS 2.8
2x 36GB WD Raptors RAID 0 (ICH5R)
2x 80 gig Seagate SATA RAID 0 (SiI3112a)
Promedia 5.1 Ultra on Audigy 2 Plat
Pioneer DVR-108D / Lite-on combo SOHC-5232K
Lian-Li PC-65 w/ all 80mm tornado case fans & PC P&C 510w Deluxe
WinXP Pro
3d03: 14185
Nice 5 pages in less then a day![]()
3DMark2001SE- 23,118 3D Marks // Aquamark 3- 57,004 //3DMark03- 8,011 //--Sapphire Radeon 9800XT 256MB,
--> Pentium 4 3.0C HT@3830 Mhz, ASUS P4C800-E Deluxe Rev 2.00, BH-6/TCCD Mem, I'm in 4GHz Club; 36 sek SPI 1M
I'd be in for 2x512 if the whole set hasn't been claimed yet >.<
Hipro has his work cut out for him. I'll upload you some pics of how you make large modules w/low density chips in a minute. I doubt most of you have seen this before. Most makers prefer to move to 64mb chips instead of stacking 32mb chips.
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
2x512 sticks here please !![]()
- AMD X2 Manchester 3800+ @ 2.8ghz 1.6v
- DFI Lanparty UT NF4 Ultra-D
- ATI Radeon X800XL PCIe 256mb
- 2x1GB PC3200 2.5-3-3-7
- 2x250GB Seagate Barracuda Raid0
- 1x120GB WD Caviar Sata
- OCZ Powerstream 420w
- nSpire 601AE Aluminium Case
- Watercooled with Swiftech Storm | Maze4GPU | Weapon Shroud/2-302 core | 2x120mm Sanyo Denkis | Swiftech mcp600
Here's some doublestackers.
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
Another angle.
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
One last angle.
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
nice photos of that ram, have you tested out some of that and how well does your own ram overclock? also could it be possible that if one weak chip out of 16 on a stick holds the rest back? This may mean unsoldiering one chip, putting another on and bam, 20fsb higher cause that single weak chip was the bottleneck, also explains why 256mb sticks oc better than 512mb
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!![]()
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
2x512mb possibly 4 if the price is right 4 me![]()
3770k @ 5ghz 1.35v linx stable
Asus Maximus V Extreme
8gb Samsung Green @ 2600mhz 11-11-11-31
EVGA GTX 680
Corsair AX850
XSPC Watercooling
Hi Pro Ram has a nice ring to it, very marketable imo
Congratulations, Geforce4ti4200, you just made it to my ignore list. Your posts are very painful reading![]()
£58.73 - This is the amount of money a loyal customer is worth to Overclockers.co.uk![]()
Beware of buying from overclockers.co.uk, they will swindle you by abusing the consumer law if they need to refund you for faulty hardware. Thieving gits
Hahahah Gazc, nice post, I agree with you, his posts are somewhat painfully rediculous.
It's pc2100 ram. It's mystery RAM that came back. No idea who the owner of it is. It has 7.5ns micron chips on it (has the good ole mT logo on there). I wouldn't even bother attempting to overclock it. It ain't mine anyways, just some crap I had laying around at work that I use for test benches once in awhile.
Just figured I'd give y'all a pic of what 1gb low density RAM looks like.
Take out your ex tonight... one bullet should do it.
I've effectively killed my sig because it is no longer accurate. Oh well!
A64 3200+ Newcie
2x512 OCz PC3500 GX
DFI NF3 250gb LPUT
No Name 9700 that refuses to die!
You guys have to remember the IC's do have to be binned for speed before they go on a module..then the modules are built and then rebinned again.
Also, not to put a downer on this but the last BH6 we tried sucked bad, it was the absoloute bottom of the barrel.This is why we stopped stocking it.
One last thing you all have to remember.
BH5, BH6 and BH7 all come off the same wafer.BH6 is BH5 fails.BH7 is BH6 fails..nothing more.They all take the same voltage etc as they are really the same IC, just binned for speed by winbond.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
That's pretty interesting, bigtoe. I, for one didn't know that. So to some extent, RAM is kinda similar to CPUs, they're all the same, but some just clock better.EDIT: ACK!! bigtoe, post something, quick!
![]()
![]()
Last edited by spaceman; 07-30-2004 at 07:00 PM.
so bigtoe, its a bad idea to use pc2100 PCB cause it might hurt the oc of your ram as opposed to say pc3200 PCB? also I knew about the binning thing, but is it true once you throw volts, bh6 catches right up to bh5? so I assume bh6 isnt as good as bh5 if both are using low volts but with volts, both rule?
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!![]()
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
Unless the PCB is horribly designed, I dont think there will be more than 5mhz (possibly 10 if the cleaner guys cook a pizza in the ovens) difference in the ending clock/overclock..
All along the watchtower the watchmen watch the eternal return.
I'm up for a few 512mb sticks if the price is right.
I don't doubt you HIPRO, but its gonna take some hella ram to beat this 3700EB.
Donate to XtremeSystems!
Workstation: Intel Core i7 4770, Asus Maximus VI Gene, 32GB Corsair Dominator Platinum DDR3-1866, eVGA SC GTX Titan, 256GB Crucial M4, Corsair HX850, Corsair H100i. Corsair Carbide 350D
Fileserver: 2x AMD Opteron 2425HE, Supermicro H8DME-2, 24GB DDR2-667, Supermicro 846TQ 24bay Chassis, Redundant 920w, 256 Crucial M4 boot, 20TB Storage
Notebook Asus Zenbook UX32VD-DH71, Intel Core i7 3517u, 10GB DDR3-1600, 256GB Crucial M4, Geforce GT 620M
i'd be down for like 3 sticks of 512. would be nice to have with that new dfi board running with a a64 3700
p4 2.4c @ 3.4
p4p800 deluxe
khx3200 bh-5 2-2-2-5 5/4
ATI 9600xt
How's that for an "ordinary" BH-6 Kingston Value Rams PC2700(DDR333) ???.......Originally posted by SAE
Man, hipro, I'd really like to know if some "ordinary" BH-6 can outperform my KHX![]()
![]()
![]()
![]()
Unbuffered
![]()
.......and one single mode.......![]()
![]()
INTEL PWA FOR EVER
Dr. Who my arss...![]()
.........
hipro,
can you also change the spdrom?
Cause a pc2700 spd isnt that good
The results llok brilliant!! Which volts?
We'll built a cirquit for it .........A friend of mine who is a programmer told me that he can do it IF we build a cirquit for so as he can program it.......Originally posted by Flib
hipro,
can you also change the spdrom?
Cause a pc2700 spd isnt that good
The results llok brilliant!! Which volts?![]()
Volts are 3.5Vdimm
INTEL PWA FOR EVER
Dr. Who my arss...![]()
.........
Bookmarks