Pifast Benchmark

[Tom Holck]

Originally posted by Garrett
Correct me if I'm wrong... you still 'must' beat Tom Holck's time of 46.25 right?

Nevertheless :thumbsup: great scores guys

Who's gonna be the first to hit 45? OPP? Tom Holck? hipro5?

Place your bets

or Macci.. OPP have never been interested in Pifast.

I estimate that to do 45 we will have to do about p4@4500 mhz, its difficult even with better coling than modded-moddet-R507a-R404a-Prommylike something...But the comming Prescott vil sure do it -easy.
Like Bowman and Hipro5, I am also working on a better cooling system, its complicated and it takes time to do.

Better cooling and Prescott, at the end of the year, will make some damage to the Pifast list I think

[hipro5]

Prescott ALL THE WAY is the solution.....1MB cache.....

[Tom Holck]

Originally posted by hipro5
Prescott ALL THE WAY is the solution.....1MB cache.....

And the 1 MB at 5GHz++

[hipro5]

Originally posted by Tom Holck
And the 1 MB at 5GHz++

Double drolling Tom.......

[RootX]

A taste of 1MB cache, straight from a Dell laptop with crappy pc2100 memory...

[hipro5]

Shi(f)t........Laptop with this pi-fast time???......and at 1600MHz only???.......and crap Ram...????

1. This laptom MUST be overclocked........
2. Bring it here to me........

[RootX]

No, hipro5 m8, no way to fit ur promie into this thing,

[macci]

When there is will there is always a way
Isnt that like a super P3 basically (P3 with bigger L2 and better bandwidth)?

I'm at 47.19 so far with 3.2@4333MHz (1.70V on P4C800). Next task is to put this on MAX3 and see if its even faster

[hipro5]

Originally posted by macci

I'm at 47.19 so far with 3.2@4333MHz (1.70V on P4C800). Next task is to put this on MAX3 and see if its even faster

Here we go again........

Way to go macci........

[macci]

Thanks m8
your my next target btw

[BioBlade]

offtopic:

macci would you like to help me with my fx5900ultra to get the best out of the card ?

please contact me @ Bio_Blade@hotmail.com


thank you verry much

[macci]

man the MAX3 is prolly the worst 875/865 mobo I've ever tested. Using pretty much slowest bios settings I can not go any higher than 252FSB (5:4 divider)!? In 1:1 mode maxes at 220ish (Vdimm 3.2V.. does about 245 on p4c800 with similar volts/settings). Also Vdimm jumps up and down.. from 3.02 to 3.35V when bios set to 3.2V
So P4C800 is going back in and wont be takin it off until ASUS releases a new one

bioblade, just OC the hell out of it using either powerstrip or nvidia control panel coolbits, if you want 3dmarks set d3d settings to 'best performance' from nvidia control panel. When you OC go up like 5MHz a time and run 3dmark03 and see that you are not getting artifacting and that the score actually improves. Once the score starts to get worse you've OCed it too far.

[hipro5]

Originally posted by macci
Thanks m8
your my next target btw

You have to be fast cos I'm about to break the 46 sec barrier........

[Caprid]

Here's my latest endevor





Thats with Registered PC2700 @7-3-3-2.5 I think running 193Mhz
Air cooled on the CPU, once I get the prommie head on there somehow and some PC3200 it might improve the time alittle

[hipro5]

Originally posted by Caprid
Here's my latest endevor
Thats with Registered PC2700 @7-3-3-2.5 I think running 193Mhz
Air cooled on the CPU, once I get the prommie head on there somehow and some PC3200 it might improve the time alittle

What???......At only almost 2300MHz????,.......Shi(f)t..........

[CodeRed]

Originally posted by Caprid
Here's my latest endevor

Thats with Registered PC2700 @7-3-3-2.5 I think running 193Mhz
Air cooled on the CPU, once I get the prommie head on there somehow and some PC3200 it might improve the time alittle

Cant wait to see the prommie results

[Caprid]

Unfortunately, that won't be for a while yet, the board fried and took my PSU along with it, I just hope the CPU is 0K. Only had it running 40 or so hours

[hipro5]

Originally posted by Caprid
Unfortunately, that won't be for a while yet, the board fried and took my PSU along with it, I just hope the CPU is 0K. Only had it running 40 or so hours

Shi(f)t again.........These things shouldn't have happen.......Sorry to hear(read) this M8.....

[Caprid]

Thanks for the condolences hipro Like I said didn't get much time with yet, but though you might like to know it runs SETI better than PiFast

[macci]

Originally posted by macci
I'm at 47.19 so far with 3.2@4333MHz (1.70V on P4C800).

Here is the screenshot of that run:

[zakelwe]

The times have really come down since the last time I looked .. nice work all.

I'm wondering what we'll be looking at come December with either Athlon 64 or Prescott.

Regards

Andy

[hipro5]

Geting a bit closer to 46 sec......Still with R404 gas......

[macci]

Very nice

what multi x FSB was that at?

[hipro5]

Thanks........

This was with multi x 15 and 288MHz fsb at 5:4 ........ Today I benched with 1:1 CPU:RAM at 262MHz and Cas 2-5-2-2 with x 16 multi and I got 46.50 sec........One of my Ram sticks is errorfree at 269MHz(538MHz DDR) at Cas 2-5-2-2 and the other is errorfree at 263MHz........Both of them are errorfree at 261MHz(in Dual Channel)......IF my second one was as good as my first one , I think I could bench at least at 266MHz and 1:1, which means sub46 sec........I'll try to find a better Ram stick.........

[Tom Holck]

Originally posted by hipro5
Thanks........

This was with multi x 15 and 288MHz fsb at 5:4 ........ Today I benched with 1:1 CPU:RAM at 262MHz and Cas 2-5-2-2 with x 16 multi and I got 46.50 sec........One of my Ram sticks is errorfree at 269MHz(538MHz DDR) at Cas 2-5-2-2 and the other is errorfree at 263MHz........Both of them are errorfree at 261MHz(in Dual Channel)......IF my second one was as good as my first one , I think I could bench at least at 266MHz and 1:1, which means sub46 sec........I'll try to find a better Ram stick.........

Nice

You are closing in.. hope Prescott comming soon. I can't improve the 46.25. Same problem 1:1 unstable over 272-273 at Cas 2,5-6-4-3 ? (corsair4000). cas 2 won't work.
working on the cooling, it will be 2 high pressure cascade compressors. Cold side at -90 degree. Cooling-power 700w at
-50 and 130w at -90, with a Prommy head. (hope it can take it). The cooling is warm side R404 and cold side etan, R170a it can explode

Just ruin my gainward5900ultra
The best radeon9800 pro is also dead.
Now only a first realise Radeon going max 525/418 sad.

Call me if you get a Prescott ES ... I might get you a -90 cascade.


Macci, same results on IC7Max3 here back to my IC7 G !