371MHz fsb on an ABIT IC7-G.....NOT BAD(again).... :)

[CATCH22ATPLAY]

Yup just give Hipro5 some time. He'll come thru alright. He updated the OCAU thread and said he was going to upload pics etc tomorow there.

[Szymek]

Originally posted by CATCH22ATPLAY
Yup just give Hipro5 some time. He'll come thru alright. He updated the OCAU thread and said he was going to upload pics etc tomorow there.

TODAY

[CATCH22ATPLAY]

Er maybe the day after tomorow hehe

[computerpro3]

can you tell us the mods yet? im having serious 5/4 issues

[Szymek]

Originally posted by computerpro3
can you tell us the mods yet? im having serious 5/4 issues

what fsb ?

[computerpro3]

well i just switched to my system in sig, but even though the memory is good up to 500mhz 2-2-2-5 (memtest test 5 looping a few hours 0 errors) and the chip can do 3.7ghs stable on air, I can't boot past 3.4ghz in dual channel 5/4! Clockgen is no help either. vagp is 1.7v, 5000 rpm fan on northbridge. 310fsb stable in single channel or dual channel 3/2. can boot 250mhz 3ghz 1/1 stable. spread spectrum off, im going to play with the usb legacy settings now. why can't i boot past 3.4ghz in dual channel with the 5/4 divider?!?! I don't wanna crap on this thread but its ticking me off, sorry hipro

btw, that fsb

[Szymek]

Originally posted by computerpro3
well i just switched to my system in sig, but even though the memory is good up to 500mhz 2-2-2-5 (memtest test 5 looping a few hours 0 errors) and the chip can do 3.7ghs stable on air, I can't boot past 3.4ghz in dual channel 5/4! Clockgen is no help either. vagp is 1.7v, 5000 rpm fan on northbridge. 310fsb stable in single channel or dual channel 3/2. can boot 250mhz 3ghz 1/1 stable. spread spectrum off, im going to play with the usb legacy settings now. why can't i boot past 3.4ghz in dual channel with the 5/4 divider?!?! I don't wanna crap on this thread but its ticking me off, sorry hipro

btw, that fsb

Had the same problem... Change your ram. Nothing can be done with that.

I had several sticks of ram and some of them were working fine at 5/4 and DID NOT POST with 3/2...

[Grace]

Originally posted by Szymek
Had the same problem... Change your ram. Nothing can be done with that.

I had several sticks of ram and some of them were working fine at 5/4 and DID NOT POST with 3/2...

It's not the RAM, it's the motherboard that creates the issue. Don't provoke someone to do that so easily since any modules he'll use will have the 5/4 divider issue, the modules are irrelevant to the problem, plus he'll lose some very rare and good RAM.

Now if nothing can be done with that or not, HiPro5 has the word here, he mentioned that he had some findings.

And I think you describe the exact opposite, the 3/2 does work most of the time and the 5/4 has the problem.

[thirdeye]

Originally posted by CATCH22ATPLAY
I heard someone sucsessfully did flash it though. But he said it didn't help any in that it did have vdd settings to 3.2v but it still only maxxed at 2.8

JUST a random thought, maybe flashing the BIOS could help those of us with vdimm mods who dont want to cut traces. IF the BIOS showed 3.2v wouldnt the MOBO up VTT? I know if I crank up vdimm and run anything less than 2.8 in BIOS my vtt plummets and all goes out of whack...

[CATCH22ATPLAY]

No it won't and can't. The winbond chip that controls VTT can only set it to 1.40 max. VDD max was 2.8 but abit is doing a V mod similar to the original ic7 vdd mod. They are tricking the winbond chip on the max3. But they forgot to trick the vtt as well. That was thier crime and is what's causing all the problems.

[st0nedpenguin]

CATCH, everytime I see your location in your sig, it makes me want to cry dude.

[hipro5]

Hi there everybody...

The modds are about to be uploaded any time now.I'll post the link as soon as they are ready in our forum........They'll be uploaded in English and in Greek langauge......

In the meantime.........here's a "little" update.......Mobo now is an IC7 one not the -G one......IC7-G one is dead and I RMA it.....I got a new one(-G) and it did 380MHz fsb in Dual mode and 387MHz in single mode.......

I think that it can't be compared with the IC7 one I've got now........This mobo was bought for a friend of mine BUT I think that I'll give him mine and keep his.......He doesn't even know what overclocking is and he's not even interested.....so why not keeping it???....



The ONLY problem now is: DOES set-fsb goes higher than clock-gen coz I'm "finished" if it doesn't.......

[hipro5]

....and.......

[hipro5]

Max S-Sandra Memory benchable in single channel mode......

[macci]

Haha! Man thats totally insane Hipro!! x2

Yes SetFSB goes to 464 or sumthing, give it a go!

[hipro5]

Originally posted by macci
Haha! Man thats totally insane Hipro!! x2

Yes SetFSB goes to 464 or sumthing, give it a go!

Thanks macci..I'll give it a go........

[Grace]

Originally posted by hipro5
The ONLY problem now is: DOES set-fsb goes higher than clock-gen coz I'm "finished" if it doesn't.......

You better be finished, else you'll finish the rest of us! :smileysex


That's a d@mn good job. Congratulations.

[hipro5]

I'll try to finish Grace ....Thanks........

[bias_hjorth]

jesus Hipro..

thats truely amazing.. another wr right? :-)

[hipro5]

Originally posted by bias_hjorth
jesus Hipro..

thats truely amazing.. another wr right? :-)

Thanks M8........Yes I just "broke" my previus one.......

[enzoR]

truely impressive

but congrats!

[Arkangyl]

holy


who needs hypertransport when your FSB is 1600mhz...

dayumn..


Show me the pictures!

to you hipro5

[shidokanjohn]

You are the man.....what else to say...

[althes]

I really want to see those mods.
Going to have a field day.

[CCW]

OMG! That, Hipro5, is absoultely incredible!!!

Pat yourself on the back! You've earnt it!