NF7/S Rev2.0 : D25 Modded bios by -=Merlin=-

[blinky]

Originally posted by LilGator
vdimm 3.3v direct mod? Just like the K8N 3.3v mod ?

VBT mod needed as well?

no clue but i didnt do that one

[by -=Merlin=-]

New bios
rev.2.0.0C
rev.2.0.0



D25 rev.2.0.0 01.08.2004 Cpc On 3.19 Bpl by -=Merlin=-

D25 rev.2.0.0C 01.08.2004 Cpc Off 3.19 Bpl by -=Merlin=-

-Timings Mod T(ras) (D25 rev.2.0.0 01.08.2004 Cpc On 3.19 Bpl by -=Merlin=-)
T(ras) 11 slowly
T(ras) 8 faster

-3.02 bpl auf 3.19 bpl
-Romsip Mod
-Cpu interface 200 Mhz Optimiert Romsip
-Power Management Mod (Suspend to Ram bei 250mhz Absolut kein problemm meher)
-COMMAND PER CLOCK (Cpc) Disable/Enable

All testet

Prme95
FFTmax 4096 // FFtTmin 4096 12st ...ok
3DMark 2001 ...ok
3DMark 2003 ...ok

mfg by -=Merlin=-

[KODE]

Thanks a lot Merlin, the d25 rev2 is the best BIOS I´ve used so far. Keep up the good work!

[JRY]

should i use cpc enabled or disabled?
am using 2x512 hyperX ram.
cpc disabled will hinder poor preformance no?

[speedyaxon]

n/m...

[Rolle2k]

is there a builtin L12 mod in those bioses? and what about bandwith tweak?

[LilGator]

Originally posted by blinky
...and 3.3v to vdimm direct mod

?

[Blaster]

I only see bios for NF7...

... but i needed bios for AN7 heh

[existz]

no, its for rev2s only , dont try it , it will it up

[seldomsean]

Originally posted by by -=Merlin=-
someone can send DFI Sandra Bandwith 250,255,260,265,270,275 to me

and which dfi bios

Here..I can send some more but at this time this was all i had screenis of

And i messed up the clairity sizeing down so much
I will take another and see if i can beat it

Int bufferd 4084 263 FSB x9
Float bufferd 3753

This was TicTac 131 Bios

LanpartyB
2x256 OCZ PC3500 EB
2400 XP-Mobile
BB ATI 9800 Pro
Antec TC 550W

[by -=Merlin=-]

test

D25 rev.2.0.0C 01.08.2004 Cpc Off 3.19 Bpl by -=Merlin=-

FSB 250 rev.2.0.0C Cpc Off

FSB 250 SSoft Cpc Off

this bios is very stable, I in long tested and nothing negative determined

[r3b0rN]

Originally posted by JRY
should i use cpc enabled or disabled?
am using 2x512 hyperX ram.
cpc disabled will hinder poor preformance no?

cpc is like the command rate i believe... like 1T or 2T, cpc on performs better clock for clock... but cpc off yields higher ram oc.

[SAE]

The D2 bios was not stable for me... got occasional reboots surfing the net, DLing, and watching some video

Using two sticks of 256mb single sided HyperX BH-5. Ran them at 240, then at 230 and still reboots...

I am back to one of Tictac's d23 bioses...

@r3b0rN

Wow, who's that chick in your avatar???

[Mikael]

This is the best BIOS I've tried so far! I couldn't even overclock past 200MHz before without instabilities and stuff. Now I've been up to 235MHz 11-2-2-2 with CPU Interface enabled!

I'm using the 2D BIOS in the original post. Does this have CPC enabled or disabled?

[uwackme]

Merlin's download links are broken?

[Kaiv]

I cant get it too~

[by -=Merlin=-]

Originally posted by uwackme
Merlin's download links are broken?

http://forums.pcper.com/showthread.php?t=338953

[by -=Merlin=-]

Hi


New Bios

rev 2.0.1C

D25 rev.2.0.1C 03.08.2004 Cpc Off 3.19 Bpl by -=Merlin=-


-Romsip Mod 1-31
-Optimirung
-CPU Disconnect Function as recomended by nVidia tech
-Alpha Timing : 2-3-3-3-3-3-4
-T(rc) : 9
-T(rfc) : 12
-Dimm Driving Strength : 6
-Dimm Slew Rate : 7
very stable, very god

by -=Merlin=-

[JRY]

WoW Merlin!! keep up the good work m8!
let me know if u need any gunie pigs to test it on

btw...would u recommend cpc off?
its better for 1gig kingston?

[uwackme]

I cant get access to the bios page... I get DNS error...hmmm

[by -=Merlin=-]

Originally posted by uwackme
I cant get access to the bios page... I get DNS error...hmmm

this problem is not well-known me, I tested

[HaLDoL]

Originally posted by seldomsean
Here..I can send some more but at this time this was all i had screenis of

And i messed up the clairity sizeing down so much
I will take another and see if i can beat it

Int bufferd 4084 263 FSB x9
Float bufferd 3753

This was TicTac 131 Bios

LanpartyB
2x256 OCZ PC3500 EB
2400 XP-Mobile
BB ATI 9800 Pro
Antec TC 550W

How many volts on the RAM?

[seldomsean]

Originally posted by HaLDoL
How many volts on the RAM?

3.3 Vdimm...

[uwackme]

Maybe Abducted or someone could alternate-host the bios's. I'd luv to tes that 2.0.1C cpc-off version, but I cant get to the page... comes up DNS error.

[by -=Merlin=-]

New Bios

rev.2.0.2
rev.2.0.3

D25 rev.2.0.2 06.08.2004 Cpc On 3.19 Bpl by -=Merlin=-

D25 rev.2.0.3 06.08.2004 Cpc On 3.19 Bpl by -=Merlin=-

rev.2.0.2 neu Romsip Mod
rev.2.0.3 optimiert 3DMark