[XS]Just got Phenom II x6 1055T (Retail)

[RaV[666]]

IMAMAGE, VERY important question for you.
Can u use higher than stock multipliers up to the end of the turbo range , or just x14 ?
Try setting it manually with and without turbo, use base 200mhz HTT in this test please .Its very important question for all the peeps that wont buy BE version of this :-)

Try,bios and software like K10stat and AMD Overdrive.
Oh, and second thing, is your bios officialy certified with X6 ? Im wondering because there is high probablity that even the not certified ones could work with X6 no problem, just maybe without turbo feature.

[imamage]

1.536v is a little high for these things, your temps on air must be 70C unless u have a serious fan on it.

FYI , I have paired the HSF with Delta 12cm fan (2500rpm),
Even under full CPU usage 100%
It's not as hot as you think
The voltage seems not right all the time

[Manicdan]

FYI , I have paired the HSF with Delta 12cm fan (2500rpm),
Even under full CPU usage 100%
It's not as hot as you think
The voltage seems not right all the time

i have a delta fan myself, might as well hook up the vacuum cleaner to the PC its that freaking strong. (except i have 2, so i should get a TRUE and put them in push/pull, lol)

and i do know the voltages fluctuate, what did u actually set it at? 1.5?

[imamage]

IMAMAGE, VERY important question for you.
Can u use higher than stock multipliers up to the end of the turbo range , or just x14 ?
Try setting it manually with and without turbo, use base 200mhz HTT in this test please .Its very important question for all the peeps that wont buy BE version of this :-)

Try,bios and software like K10stat and AMD Overdrive.
Oh, and second thing, is your bios officialy certified with X6 ? Im wondering because there is high probablity that even the not certified ones could work with X6 no problem, just maybe without turbo feature.

For Biostar TA890GXE , it's officialy certified to support X6
I will get more done tomorrow
Have to wake up early tomorrow at 8 AM (for work)
It's 2:15AM now, I barely have enough sleep

[Apokalipse]

After updated the latest BIOS from Biostar (TA890GXE)
The Vcore voltage (default) read as "1.32V"

what is the power consumption at that voltage?

[crazydiamond]

wow thanks imamage!

[crazydiamond]

1.536v is a little high for these things, your temps on air must be 70C unless u have a serious fan on it.

edit: double post fail

[endlesszeal]

i know this may sound noobish, but are all the BE heatsinks the one with heatpipes? do all thuban's come with it? are they any good?

just wondering because i remember all the old FX's and opteron's came with heatpipe heatsinks and they were almost on par with the thermalright xp-90s.

[jcmarfilph]

sleep now imamage. We will be waiting for the 4Ghz results ^_^

Thanks for sharing.

[ajaidev]

AMD (247 Viewing)
CPU's & Motherboards

Intel (105 Viewing)
CPU's & Motherboards

Seems when imamage comes the no of people in AMD section gets boosted... Imamage Boost hehe

[Manicdan]

not sure what your confused about. if the voltage really is 1.53, thats way higher than ANY 45nm Phenom needs for 3.6ghz, even my PII940 dinosaur. which is why i didnt believe that to be the actual voltage. and if you look at power envelopes, 1.53v would be over 200W im sure. to get peek OCing 1.45v is typically the top for air cooling, since as you go any higher, your temps get too high and its unstable. but as we can see hes got his built for benching, so he should be ok for some some 1.5v suicide runs, but that voltage is for water cooling generally.

[imamage]

OK before I head for bed, last treat for tonight

Phenom II x6 1055T @ 3.9GHz
http://valid.canardpc.com/show_oc.php?id=1132656
- wPrime 32M


- 3DMark 06 CPU only


- Everest



- SiSoft Sandra





For 4GHz....I guess I need better luck + time to deal with

[ajaidev]

eeek so close to 4Ghz should have just tried 4Ghz instead of 3.9Ghz

[RaV[666]]

Thanks for reply IMAMAGE, when you wake up tomorrow and have some time, please check this multiplier thing, and also i see in your sig you have M3A79T, pop in thuban there without upgrading the bios ;-).THX AGAIN ,its nice to see again someone with balls to do pre release benchmarks on XS :-D

[Manicdan]

i think the ram might be a limit, its 50mhz faster than your previous runs, might wanna drop that down if you were shooting for 4ghz only.
still 40% OC on a top end cpu is sick

[cesariuth]

by air http://hwbot.org/community/submissio...55t_5sec_959ms

and LN2 http://hwbot.org/community/submissio...be_6292.46_mhz

nice

[crazydiamond]

not sure what your confused about. if the voltage really is 1.53, thats way higher than ANY 45nm Phenom needs for 3.6ghz, even my PII940 dinosaur. which is why i didnt believe that to be the actual voltage. and if you look at power envelopes, 1.53v would be over 200W im sure. to get peek OCing 1.45v is typically the top for air cooling, since as you go any higher, your temps get too high and its unstable. but as we can see hes got his built for benching, so he should be ok for some some 1.5v suicide runs, but that voltage is for water cooling generally.

i just think 1.5v is perfectly save for air cooling w/ good airflow, even up to 1.55 w/ push pull

air - s1283 w/ ultrakaze 57c max on cores


water - loop in sig 47c max on cores

[ajaidev]

PcCI2iminal has one and did not even come here to give a review

sending angry PM now :P

[RaV[666]]

ohhh, preliminary benches look good, its safe to say 4ghz is doable for most people on air.And thats with 2 cores more and on same procution node.
GOOD JOB AMD.Its good that turbo feature works with overclocking also.
When i buy 1035T its going to run at 12x256=3.3ghz for all cores and 4.1ghz with 3 cores.What a nice F-g upgrade for a 3 year old mobo ;-D

[RaV[666]]

Double fail post, XS is hammered by peeps looking at this ;-)

[jcmarfilph]

From HWBOT:

wPrime 32m - 4sec 727ms - Luca (no team) - (AMD Phenom II X6 1090T BE @5808MHz [#1 Phenom II X6 1090T BE in wPrime 32m] )

wPrime 32m - 5sec 320ms - Luca (no team) - (AMD Phenom II X6 1035T @4960MHz [#1 Phenom II X6 1035T in wPrime 32m] )

[PetNorth]

Thanks a lot Imamage!!!

Can you run this video encoding benchmark? (x264 rules!!)

http://www.techarp.com/showarticle.aspx?artno=520

Thanks and GO!!!

[moonhunter]

http://forum.coolaler.com/showthread...=236011&page=6

AMD 1055T 4.2Ghz Cinebench R11.5 hit 7.38

[crazydiamond]

http://forum.coolaler.com/showthread...=236011&page=6

AMD 1055T 4.2Ghz Cinebench R11.5 hit 7.38

WOW

[jcmarfilph]

http://forum.coolaler.com/showthread...=236011&page=6

AMD 1055T 4.2Ghz Cinebench R11.5 hit 7.38