Gigabyte X58A-UD3R/Extreme Discussion Thread

[davelakecity]

Yeah, my chip can't touch that..
I still have some tinkering to do tho...
Thanks for the info.

[sRHunt3r]

Definitely nice temps! I'm looking at replacing my Black ICE 240 for and RX240 rad, I see you have the 360 model, any idea what the flow resistance is like?

I will have my flow meter,temp sensors and controller tomorrow but I will not be able to install it until Thursday. I will post my results but I warn you that they will be skewed as my RX360 is mounted outside my case with quick disconnects on the outlet of a 14k btu stand alone A/C unit.

[radaja]

heres my latest,i only ran it for an hour because theres a thunderstorm brewing and i need to turn
off the computer.going to run linx on my x64 install to join the 4.5Ghz linx club next.

□□MB□□-Gigabyte X58A-UD3R
□□CPU□□-i7-920 #3845B027
□□MEM□□-G.Skill DDR3-2200 cl7

21x215@4515 w/HT on DDR3-1720 8-8-8-21 1t
Prime95 blend 1hr running


Prime95 Blend 1hr stopped

[sRHunt3r]

Congrats Radaja! Nice run and temps

[cowpuppy]

OMG radaja you hit it out of the ball park

Whats your cooling agian? Water? Chilled?

I see your only in Dual Chanel will it run like this in triple channel?

I backed mine down to 4.2ghz w/HT on and lowered my vcore and Qpi/vtt

[radaja]

sRHunt3r and cowpuppy,thanks guys.well im running water with AC.as for the dual channel,i have to run it this was because
i've only got a 2x2GB kit at the moment.the g.skill DDR3-2200 7-10-10-28 kit.im hoping to sell these soon and get a triple channel kit.
but im pretty sure i can get the same clocks with triple channel,might have to raise the vtt?

heres my linx run and an updated 2hr prime blend run

http://valid.canardpc.com/show_oc.php?id=1155708

21x215@4515 w/1.37v DDR3-1720 8-8-8-21 1t
LinX 20 runs completed-Vista x64



Prime95 Blend 2hrs running-XP x86


Prime95 Blend 2hrs stopped-XP x86

[hicookie]

looks that chip very strong, also curios what cooling you are using for 920

[In-Fluence]

That's looking real sweet, hope mine goes that far!

[hicookie]

would like to share my setting of GSKILL 2000 6-9-9-24
The setting is for 24/7 daily using with air cooling system



tested on UD3R, 200/2000 6-9-9-24

BIOS setting

>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------16X
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Disabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X16]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[700mV]
PCI Express Clock Drive----------------------------[700mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[10.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[10.0]
DRAM Timing Selectable (SPD)---------------------[Expert]
Channel Interleaving-----------------------------------[6]
Rank Interleaving----------------------------------------[4]
Channel A 6-9-9-24-40-6-6-10-20-7-110-6-30-2-Auto-57
Channel B 6-9-9-24-40-6-6-10-20-7-110-6-30-2 Auto-59
Channel C 6-9-9-24-40-6-6-10-20-7-110-6-30-2-Auto-61
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.05000v]
QPI/VTT Voltage------------------------------------------[1.255v]
CPU PLL-----------------------------------------------------[1.800v]
PCIE----------------------------------------------------------[1.500v]
QPI PLL-------------------------------------------------------[1.100v]
IOH Core-----------------------------------------------------[1.100v]
ICH I/O-------------------------------------------------------[1.500v]
ICH Core-----------------------------------------------------[1.100v]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]


with this kit runs 210/2100, but Cl8


and BIOS setting

>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------16X
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Disabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
QPI Clock Ratio------------------------------------------X36
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X15]
Isochronous Support-----------------------------------[Enabled]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[210]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[210]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[700mV]
PCI Express Clock Drive----------------------------[700mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[10.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[10.0]
DRAM Timing Selectable (SPD)---------------------[Expert]
Channel Interleaving-----------------------------------[6]
Rank Interleaving----------------------------------------[4]
Channel A 8-10-9-24-40-6-6-10-20-7-110-6-30-2-Auto-59
Channel B 8-10-9-24-40-6-6-10-20-7-110-6-30-2 Auto-61
Channel C 8-10-9-24-40-6-6-10-20-7-110-6-30-2-Auto-63
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.10000v]
QPI/VTT Voltage------------------------------------------[1.255v]
CPU PLL-----------------------------------------------------[1.800v]
PCIE----------------------------------------------------------[1.500v]
QPI PLL-------------------------------------------------------[1.100v]
IOH Core-----------------------------------------------------[1.100v]
ICH I/O-------------------------------------------------------[1.500v]
ICH Core-----------------------------------------------------[1.100v]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]


Tested with crap bloomfield stock fan, if you want oc multiplier just
try raise vcore and multiplier, i think you know what i mean.
would like to know if you have problem with those settings, cheer!

HiCookie

[In-Fluence]

Thanks for those hicookie - might just give these settings a whirl when I get back to work and see how I fare

[radaja]

looks that chip very strong, also curios what cooling you are using for 920

hicookie,thanks.very nice ram you have
water,rad w/res/block(EK supreme LT)/pump and the help of AC

In-Fluence,thanks.hope your goes far too.

[hicookie]

hicookie,thanks.very nice ram you have
water,rad w/res/block(EK supreme LT)/pump and the help of AC

In-Fluence,thanks.hope your goes far too.

hehe, nice a 24/7 cooling system, i need to clean space if i gonna
to use chiller water, serious nice setting you there and with your equipment

[hicookie]

update setting with adata 1866+ (8,8,8,24)
This kit i got its elpida hyper, but sorted bad from 2200+ modle
so you could run this 200-2000 with CL7-7-7 but atlest needs 1.72~ 1.76v
for Suepr pi 32m. so back to 24/7, i lock vdimm to be 1.66v
and using xmp you could oc to 200MHz CL8. by the way i change cooler to
Thermaltake frio, give me 4.2GHz stable

BIOS setting

>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------21X
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Disabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X16]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[700mV]
PCI Express Clock Drive----------------------------[700mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[10.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[10.0]
DRAM Timing Selectable (SPD)---------------------[Auto]
Channel Interleaving-----------------------------------[Auto]
Rank Interleaving----------------------------------------[Auto]
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.33750v]
QPI/VTT Voltage------------------------------------------[1.255v]
CPU PLL-----------------------------------------------------[1.800v]
PCIE----------------------------------------------------------[1.500v]
QPI PLL-------------------------------------------------------[1.100v]
IOH Core-----------------------------------------------------[1.100v]
ICH I/O-------------------------------------------------------[1.500v]
ICH Core-----------------------------------------------------[1.100v]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]



here is prime


HiCookie

[wolvers69]

Nice clock radaja. I'd be well pleased with that.

[cowpuppy]

Went back to 4.2Ghz w/ht on. Did some tweaking of the voltages. I don't think I can run 4.4w/ht on unless I switch to water.

still 4.2ghz is fast it's just not a cherry cpu and any1 getting 4.2 should be really happy they at least didn't get a dud.

[hicookie]

Intel 980X
Intel 980X stock Fan
X58A-UD3R
Gskill F3-18400CL8T-6GBPIS (DDR3-2300C8)








>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------21X (4.03GHz)
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Endabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
QPI Clock Ratio------------------------------------------X36 (6.91GHz)
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X19] (3.648GHz)
Isochronous Support-----------------------------------[Enabled]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[192]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[192]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[800mV]
PCI Express Clock Drive----------------------------[900mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[12.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[12.0]
DRAM Timing Selectable (SPD)---------------------[Quick]
Channel Interleaving-----------------------------------[6]
Rank Interleaving----------------------------------------[4]
Channel A 8-11-8-28-auto-auto-auto-auto-auto-8-auto-auto-auto-auto-Auto-Auto
Channel B 8-11-8-28-auto-auto-auto-auto-auto-8-auto-auto-auto-auto-Auto-Auto
Channel C 8-11-8-28-auto-auto-auto-auto-auto-8-auto-auto-auto-auto-Auto-Auto
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.27500v]
QPI/VTT Voltage------------------------------------------[1.415v]
CPU PLL-----------------------------------------------------[Auto]
PCIE----------------------------------------------------------[Auto]
QPI PLL-------------------------------------------------------[Auto]
IOH Core-----------------------------------------------------[Auto]
ICH I/O-------------------------------------------------------[Auto]
ICH Core-----------------------------------------------------[Auto]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]

[l0ud_sil3nc3]

here are some low voltage oc's that are IBT stable, 25 passes

on a very very nice W3540

thanks again steve



this is cooled with a Venomous X with two Scythe SFF21F 1600 rpm's in push/pull. I can't wait to get it under water.

[St Devious]

does this work with e5620 32nm quad core xeon cpu ?

[cc_zero]

I got my UD3R and i7 920 D0 a cupple of days ago. The batch (3936B217) seems to be a rather moderate one, so I can't go very high at the moment. I already need some 1.35v for 4GHz and I get temperatures in the high 80s at that level. I use a Noctua NH-U12P SE2 with the two stock fans. They're probably a little slow with their 1200 RPM as are the case fans with two 120mm@1000 RPM pulling in and one of them pushing out.
Anyway, here is the current OC:


I'm currently pondering two things. 1) Selling the 920 and getting a new one 2) Switching to water.
Well, let's see what the future brings

[systemviper]

here are some low voltage oc's that are IBT stable, 25 passes

on a very very nice W3540

thanks again steve



this is cooled with a Venomous X with two Scythe SFF21F 1600 rpm's in push/pull. I can't wait to get it under water.

Sweet, i am glad that you are happy and i can't wait to see it under water....


i'm waiting to see some of that x3380 action

[PatRaceTin]

help my friend decide

X58A-UD3R or X58A-UD7 ????

[St Devious]

does this work with e5620 32nm quad core xeon cpu ?

help here

[wolvers69]

I took the blue Gigabyte plate off of the NB heat sink last night. It was hot, as it had been running without a fan on for a while, so the adhesive tape was soft and it peeled off quite easily. Temps are now a nice 48C which is 8-10C cooler than it was before.

Also, got the vcore down nice and low now.



Popped in a second 5850 as well.

[wolf2009]

I took the blue Gigabyte plate off of the NB heat sink last night. It was hot, as it had been running without a fan on for a while, so the adhesive tape was soft and it peeled off quite easily. Temps are now a nice 48C which is 8-10C cooler than it was before.

are you talking about this thing here



Did you just pull it off ? Does that void warranty ?

[wolvers69]

Yes, yes and probably. Like I said, I did it when it was hot but it still took a bit of force to pull off.