nanofluid!

[littleowl]

ok so a guy got on another forum I get on a while back and asked people if they thought of trying nanofluid and a member jumped all over him so to speak.
I PMed the guy and said I would like to know more about this stuff I am willing to see how it works for my systems. I crunch so my systems are always 100% load.

I have a cheap mobo ECS G31T-M v-1.0
With a E6600 running at the time stock speed.
The waterblock on this chip is my OLD maze4 that I made a hold down for, This system was crunching right along with core temps 32c, 32c and room temp at 23.9c again 100%load

So I got all my loop drained and put the nanofluid in and decided at the last min that the stuff looked kind of heavy so I added a little maybe 8-10 OZ. of distilled water. Boot the system back up and room temp was 25c and still stock speed with core temps the same 32c, 32c

I hurt my thumb and have not had time to mess with it at all so it has been chugging right a long in my barn. about 3 weeks go by. I decide to check on it. Well room temp was down some but didn't check it. I decided to up the FSB a little. I took it up making the chip run 2.777. One week later my I go look at it. Room temps are 28.9c my cores are 36c 36c. Still running 100%

I cant say much about if this stuff is great or not yet but I can say it helps keep my temps down when I took up the FSB. I expected it to go up 1 or 2 degrees. That is what normaly happens but it didn't.

here is a pic of my system running the pump is a D5 (you can't see it) Here is also a pic of the bottle of nanofluid.