HERE we go again......AMD this time...Some BH-6 action...

[eva2000]

lol.. did those sink/cooling help any with max oc ? doubt you could use them in dual channel these days hehe

[hipro5]

what exactly did you mod on the dimms ? what does it do the mod ?

Exept of the sillicon paste onto every chip of them and then glued with some fast acting glue with the Thermaltake heatsinks, I added some electrolytic capacitors on the back of the PCB and on the Vdimm to ground......I gaind about 2 - 3 MHz more out of it......BUT the above benchies were without them coz we couldn't fit in near DRY ICE's cube.....

[hipro5]

now that is just spooky if i get some bh-6 ill have to send it to you for some monster fying

[hipro5]

lol.. did those sink/cooling help any with max oc ? doubt you could use them in dual channel these days hehe

Yes they have helped a lot NOT with fast screenshots like S-Sandra(maybe a little) but for Prime, etc.......NO WAY Dual DDR.....Fortunately Dual DDR wasn't even existing that time....

[Bennah]

Ha,ha,ha...........George........LOOK what I've just found!........some OLD photos of my Corsair PC3200(DDR400) that I was benching long time ago on that thread with the chainbold .......shi(f)t......What you have remembered me now!!.....P.S. This exact Ram still works on a friend's of mine rig....

Typical Hipro... just going that little extra further with what ever he can get his hands one

2-3Mhz... who cares... its a gain Could of been the factor of 279Mhz or 281Mhz

Great work on the Kingston Value ram

[hipro5]

Typical Hipro... just going that little extra further with what ever he can get his hands one

2-3Mhz... who cares... its a gain Could of been the factor of 279Mhz or 281Mhz

Great work on the Kingston Value ram

Thanks M8......

[[XC] moddolicous]

wow, nice results hipro. Show us some superpi action.

[hipro5]

wow, nice results hipro. Show us some superpi action.

Super-Pi did the other guys before I go there.....I think that they'll start a new thread over XS tommorow.......It was 26sec.....

[esdee]

last day was a great (and fun day)
ok SuperPI was 26:515 (with the ms patched PI)
Hipro5s mems did great on the AMD platform, the PIfast was about 37:73 (or so)
and im sure we can break 9k on BH6. It was our first experience with Dry ice so it took us much time testing how it behaves on temps. Next time (pretty soon) we 'll do better. (+3D bench with a x850xt)

now that i have all the hardware in my home ill give my UTT a HOT run

[esdee]

[QUOTE=s7e9h3n]Wow, that's some serious bandwidth! How much Vdimm does it take to do that? This is all that I could do when I was testing the Venice:

about 3.92V was for the 290++ action on the BH6.
With a Venice (or a san diego core chip ) we hope for DDR600 benchable

[hipro5]

[QUOTE=esdee]

Wow, that's some serious bandwidth! How much Vdimm does it take to do that? This is all that I could do when I was testing the Venice:

about 3.92V was for the 290++ action on the BH6.
With a Venice (or a san diego core chip ) we hope for DDR600 benchable

Hi there esdee....

Count in the Vdimm droop that it occurs via the Mobos DDR Slots which is about 0.03Vdimm, thas 3.88Vdimm real on these Ram modules.........DFI has very loose DDR slots.......NOT touching firmly the BETA DDR PCB of the Maximizer......

[esdee]

Hi there esdee....

Count in the Vdimm droop that it occurs via the Mobos DDR Slots which is about 0.03Vdimm, thas 3.88Vdimm real on these Ram modules.........DFI has very loose DDR slots.......NOT touching firmly the BETA DDR PCB of the Maximizer......

hipro5 you know me ... that 0.03V drop is hurting me.
DFIs slots are indeed loose. and spikes is the worst thing i can imagine @ 3.9V.
Im going to solder the maximizer on the mosfets (as soon as i have mine )
i don't give about guarantees.
(guess what, i found that 500grams of Dry ice are still on the box we keep it).
ill have to rest for a couple of hours and then go back for 30mins of benching

[Gogeta]

I can't wait to pick up one of your units. I'd much rather use that than the 4.0VDIMM option on the DFI board.

Ditto.

[esdee]

guys it's so fun to see smartguardian changing the Vdimm indication on the fly (using the trimmer in the maximizer)

[esdee]

ok i know im a teaser ... again

[AKURA]

ok i know im a teaser ... again

Hipro5 did a good job on that maximizer just from the looks of it...A lot of filtering caps. Here's a to that.....Waiting patiently for the relase.

[esdee]

hipro5 ill remake the insulation on the Dry ice so we can use the HSPs on both dimms. going for DDR600@2-2-25

[AKURA]

hipro5 ill remake the insulation on the Dry ice so we can use the HSPs on both dimms. going for DDR600@2-2-25

Waiting patiently for your results bro. Goodluck

[hipro5]

hipro5 you know me ... that 0.3V drop is hurting me.
DFIs slots are indeed loose. and spikes is the worst thing i can imagine @ 3.9V.
Im going to solder the maximizer on the mosfets (as soon as i have mine )
i don't give about guarantees.
(guess what, i found that 500grams of Dry ice are still on the box we keep it).
ill have to rest for a couple of hours and then go back for 30mins of benching

DON'T "play" with numbers esdee........! The 0.3V you are writing down is 300mV Vdrop.......You should write "0.03V" thas 30mV.......

Any news about the 3D benches?

[esdee]

DON'T "play" with numbers esdee........! The 0.3V you are writing down is 300mV Vdrop.......You should write "0.03V" thas 30mV.......

Any news about the 3D benches?

ooooops, yes you are right. 0.03V ill edit.

give me a couple of hours for 3D, ill install that r507 prommie of yours in the x850xt. 10kg of dry ice are on the way

[esdee]

some minor updata of Hipro5s BH6... we had more time to play with those babies


NO tweaks for sandra (lock page files)
9k is possible

[bachus_anonym]

some minor updata of Hipro5s BH6... we had more time to play with those babies


NO tweaks for sandra (lock page files)
9k is possible

http://www.thelab.gr/attachment.php?s=&postid=213809

esdee, can you not crop the screenshot that much. if you save it as .PNG you can easly attach even whole 1600x1200 screen here (~200KB). would be nice to see clocks, cpu-z, a64tweaker and all the works...
what OS are you on? XP? is that why you don't use mem pages. if so, change OS, tweak it and 9k is yours @ the same sclocks

otherwise, 292MHz looks really nice and good luck! :thumbsup:

this is max I got from my BH-5 so far, just for reference. I can go as far as 286MHz on that multiplier but Sandra would not show results for the love of my life - "something about module cannot be updated"

8683/8595 with A64 Winchester @ 310x10=3102MHz DDR564 5-2-2-2.0-1T - cpu-z verified

[esdee]

esdee, can you not crop the screenshot that much. if you save it as .PNG you can easly attach even whole 1600x1200 screen here (~200KB). would be nice to see clocks, cpu-z, a64tweaker and all the works...
what OS are you on? XP? is that why you don't use mem pages. if so, change OS, tweak it and 9k is yours @ the same sclocks

otherwise, 292MHz looks really nice and good luck! :thumbsup:

this is max I got from my BH-5 so far, just for reference. I can go as far as 286MHz on that multiplier but Sandra would not show results for the love of my life - "something about module cannot be updated"

8683/8595 with A64 Winchester @ 310x10=3102MHz DDR564 5-2-2-2.0-1T - cpu-z verified

bachus sorry , i used the pic from thelab.gr where the size is pretty limited.
and there is nothing special on the screenshot we took of that sandra run
For 9K there will be a full screenshot i promise

the OS is w2k3 but something is wrong with the installation and i cant get the page files tweak to work.Ill have to re install w2k3.

there is some juice left on the mems but the CPU is reaching it's limits

i hope within a week ill have my new phase completed so i will have much time to bench without worryin about the dry ice.ill have some everest latency results soon too

nice BH5 there! "something about module cannot be updated" i get this message when i tested my 2x512 UTT @ 280Mhz , 277 was fine tho

we'll update as soon as we bench again ... it's gonna happen soon

[Revv23]

Edit - NM.