Official Winchester OC Thread!

[mad mikee]

I got sick of looking at my CBBID 0451 3500+ which I had Primed at 2.56ghz on air with 1.6v. I was planning on putting it under the Mach II this weekend but I'm pretty sure it won't do much more than 2.6ghz. On a whim I went down to the local PC Club store and took a look at their very limited selection. I picked up a 3000+ CBBHD 0444 and it looks good so far. The thing that really impressed me was it going all the way to 2.6ghz on the default 1.4v! It looks like a good match for my TCCD and the DFI NF4-DR.

Veddy good chip

[xavicl]

I have CBBID 0450 3500+ 2.7GHz @ 300x9 , 6 hours prime. 1,63Vcore :S there are better chips

[Perc]

hey guys

just picked up a 3000 winchester retial box to play with while i get my FX-53 out of the hospitial. anyways here are the steppings let me know what i got? i usualy try and buy retail because they tend to give you the verry latest steping is what i hope the case is now?? ADA3000DIK4BI CBBID 0502BPAW 1184288A50123

i planon setting the chip up in my mahc unit tonight so i hope im not effected by that temp thing the winchesters seemed to be haunted about a few months back...

ths perc.

[perry_78]

I have CBBID 0450 3500+ 2.7GHz @ 300x9 , 6 hours prime. 1,63Vcore :S there are better chips

What's your BIOS set voltage?

[TekXoID]

OC settings in sig...I'm pretty satisfied until SOI/SSE3 A64's arrive.

[Th3__W00T_GuY__]

2.7 GHz Superpi 32M stable + 24/7! :banana4: :banana4: can't oc ram right now !



Verification: http://valid.x86-secret.com/show_oc?id=2801

[gundamit]

Can't seem to get it stable enough to Prime over 3ghz, but i can run 3Dmark2001 and also SuperPi
I've lowered it all the way down to 2.85ghz and it still craps out of Prime, sometimes in an hour, sometimes after 4 hours. Seems kind of random. Any ideas? Otherwise I'm pretty happy with stability.

[BadlyDrawnBoy]

CBBFD 0441VPBW
3200+
10x255 1.525V
Arctic Cooling Freezer 64
DFI NF4 Ultra-D

[A_X]

Finally got a good one:



Air Cooling. Btw don't mind the high Vcore. This was just to check how high I could run Pifast. For 24/7 I run 2,75Ghz @ 1.6V.

[NiCKE^]

Got my winnie to do 2.4ghz stable 24/7 with prime. Haven't tried any more but I will. http://home.no/nickeh/2.4ghz.240fsb.1.5-2-2-6.solid.jpg
http://home.no/nickeh/2.4ghz.240fsb....2-6.solid2.jpg
http://home.no/nickeh/2.4ghz.240fsb....2-6.solid3.jpg

240FSB 1.5-2-2-6 1:1 1T 2.4ghz 1.4v 3.3v (Set 3.3v in bios)

[CP-Geek]

Here's my 24/7.

CP

[aver]

I will post pictures when I go for lunch, but right now
Running
270HTT * 9
Ram 2.5-4-3-7 1T 1:1
Sandra gives 7000+ MBS
SuperPi 34sec 1 M
I think this thing will go pretty far (i havent tested further yet)

[zeebs]

First boot on brand new machine.

Boxed air cooler
0447 SPAW 3200+
G. Skill LE @ 2.5-4-3-7
Hope to get it under water soon.

[gallant]

Well, here is my winny OC.

A64 3200+ (CBBID 0502APCW )
DFI NF4 Ultra - D (BIOS 218)
2x512 OCZ 3500+ plat. Ltd. Edition.
Antec Smartpower 430w

fsb @ 250 mhz
Core @ 2.375ghz (x9.5) (1.450v)
HTT x4 (1.20v)
DRAM @ 216 mhz (432 DDR, 2.70v, 9/10, 2-3-3-8)

No pics yet. Not worth the effort! lol

[naelq]

keep working bud!

[gallant]

Seems my core is not going to cooperate with me much past this OC. No matter what I adjust I can't get the core to accept 2.4+. I've had my ram to nearly 500mhz ddr and dropped HTT lower and lower but still, even at 1.525v the cpu just poo's on it all.

Dern this CBBID junk!

[zeebs]

Well, had some time to do more testing. Lower FSB than my original OC, but higher overall speed, and slightly higher vcore. Looks like I got a nice chip! I am really happy with it so far.

[mad mikee]

9x305 @ 1.55Vcore, 2.8 Vdimm
9x305 - settings later

[gundamit]

Stable enough for games, 3DMarks and 32M SuperPi runs. Can I stop obsessing why it bombs out of Prime in about 1-4 hours?

[PlatoonSgtElias]

http://www.zone.ee/platoonsgtelias/1/3GHz_AIR.JPG?2

3012MHz with air... got 3100MHz outside but dont have a pic

[zeebs]

More testing with the CBBHD 0447 SPAW 3200+.

This thing gets iffy around the 2.7ghz mark, but its doing some nice work below that.

Here's a pic of it doing 2.5ghz on 1.376 volts

[vlad]

Hay zeebs it sounds like a crappy step you have there, You sould sell it to me and get another. Just joking bro. Mine was a little stubborn at first. 2.5ghz was around what it would do stable at that voltage too, But once i bumped the vcore up it started to take off. Keep pushing it. Good luck.

[AllBrain]

This is the max stable my 3200+ will do... (CBBHD 0450SPBW)

[Feinripp]

@Allbrain:

i have the exact same CBBHD0450SPBW.. about 1,7V is a lot Juice for it..
i wonder how much Vcore does yours need @ around 2500 Mhz?
Mine does Prime for 8h @1,5v /2550Mhz.
But if i try 2650Mhz, it needs 1,65V. Thats to much 4 Stock Cooler.

[zeebs]

Hay zeebs it sounds like a crappy step you have there, You sould sell it to me and get another. Just joking bro. Mine was a little stubborn at first. 2.5ghz was around what it would do stable at that voltage too, But once i bumped the vcore up it started to take off. Keep pushing it. Good luck.

Thx bro. I am having problems in prime with it over 2550 mhz. It gets an error within the first minute, seems like I have tried it all . It just won't stabilize. At least it is running super cool @ 2.55 but I want MORE SPEED!!

If I can't figure out what to do to get it stable beyond that I will probably just splurge on some vx to keep things as fast as possible for now and maybe upgrade for venice or DC FX