The Official Venice Overclocking Thread

[Five-Seven]

My Venice
CBBLE 0512 DPAW






CPU-Z Validation
http://valid.x86-secret.com/show_oc.php?id=21161

all aircooled

runs also 2700MHz wirh default vcore

[KenLau]

Welcome to XS KenLau and all I can say is WOW. Nice results on air! Have you run any stability tests on it? At what speed? And what are your temps at the Vcore and air?????

Thanks e7e9h3n
Here is some stabitity test of this lovely baby
Prime stable at 2700mhz 300x9 vcore 1.39v,
and super Pi 32m pass at 2900mhz 290x10 vcore 1.52v.
As all we know ,3ghz on air was a high mountain of the Venice chips,
so I will try h2o cooling on it later,post more results soon

[AMD-me]

Heres my max stable. Bought from Cheif Value OEM

Any Idea on how many watts a 2800mhz 3000+ LBBLE 517 at 1.712v is?

[TheMeatFrog]

Here are some initial results of my 3000+ 0516GPEW Retail from cheifvalue...

I'll report back later with more results!

[coop]

3500 Lbble 0515fpaw also a 25min 32M Super Pi and an Aquamark screen below. Don't know how much more it can go, getting ready to paint with liq. electrical tape and cut some foam. [IMG][/IMG]

[A Scream]

Well as I'm packing to go out to see the Grand Canyon. I decided to hook up my Vapo to my 3800. Here are the results of about a qauter of a day's OCing. Being that my computer is not hooked up to the internet, I just have screenshots. I'll be back in around 10 days. I'll get em verified then.

[Hinnavaatlus]

So i buyed to Venice 3000+
stepping: LBBLE 0516 CPCW
Z637478D50371
cooled with Hyper6
home temp: 26
CPU temp: 57
http://www.zone.ee/mardo53/Arvuti/Be.../31,266s.PNG?2
i gived 1,7v but its bit slower as that conf
http://www.zone.ee/mardo53/Arvuti/Be.../31,203s.PNG?2

i have bad mem, its D43

im bad in english

[2||Para]

http://valid.x86-secret.com/show_oc?id=21657

Not to bad on Geil Value Ram and Air Cooling.

[AllBrain]

Here is my new 3200+ doing 2.83 Ghz. Might be able to get it up to 2.9 Ghz, if the damn MSI board will give me a stable vCore. :-(

[overcrash86]

just watercooled

[coop]

water 0515 FPAW [IMG][/IMG]

[Vroom]

AIRCOOL : XP90C with 90@5V
IHS REMOVED idle 23°C 21°Room (mobo on a table)

[SET]

Firs Test.

3000+ LBBLE 0517APJW @ Thermaltake Venus 9



Until Soon

[Surerbug]

my venice 3200 with vapo ls

ADA3200DAA4BP
LBBLE 0517BPEW

[cpulloverclock]

just the link cuz 1.7mb
http://cpull.free.fr/Overclocking/32...rpi-25.359.jpg





soon 100MHz+ but maybe limited by my chip

[esdee]

3500+ Venice
Prommie r507 re gassed (thanks hipro5)
Kingston HyperX BH5 (good old) 2x512MB

did a WR (with the first attempt, too much headroom on this CPU) 3472.86MHz --> http://valid.x86-secret.com/show_oc?id=23069

My best Pi run so far

[Jomiy]

new chip.
3500+ 0515FPAW

For some I can't pass Super Pi 32M at 280x10. It BSOD/froze in Windows after the 24th loop! In BIOS:
2.9v, 2.5-4-6-3-7-15-3-2-1-2-2560-1-E-A-0-7-2-8-5-256-D-16-7-D

Still tweaking so I can get 280x10

[cpulloverclock]

[duploxxx]

current venice 3000+ oc 2840@1,52v 9x315
but this is not the max of cpu @ that vcore its just my tccd @ max 1/1

more to come...... also need to test my sd fast

ada3000daa4bp
cbble 0512dpbw
1229488c50073

http://users.telenet.be/duploxxx/oc/...02.5-4-3-8.jpg

duploxxx

[duploxxx]

update:

3000+ cbble 0512dpbw

oc 2963 for the moment at 1,58v on air
http://users.telenet.be/duploxxx/oc/...9%20166dev.JPG

duploxxx

[Hinnavaatlus]

http://www.zone.ee/mardo53/Arvuti/CP.../2922Mhz.PNG?2
i have 11Mhz more now

[exscape]

Best super pi run
http://web.telia.com/~u18411604/superpi.jpg

Highest suicide shot (verified)
http://valid.x86-secret.com/show_oc.php?id=23459

LBBLE 0517DPMW, aircooled, info in first pic

[blackjok3r]

Heres my 32M SuperPI Run.
25m 31.031s blackjok3r[2867Mhz 3000+ 90nm Aircooled- KHX3200K2/256 @ 261Mhz]


I also have this 1M on air cooling, Highest I have seen on air too.
28.891s blackjok3r[2936Mhz 3000+ 90nm Venice Aircooled- KHX3200K2/256 @ 266Mhz] Sorry CPU-Z etc. Isn't shown in this screenshot.


All these results were acheived on a modded Arctic Cooling Freezer64 which costs only $44 Austrailian Dollars.

[JediMaster]

Results from an A64 Venice 3000+ LBBLE 0517EPAW doing 3GHz on air aided by an XP-90 and a room-a/c.

Just a simple 1M SuperPi shot at 3G for now - prime stability will probably need more volts and better cooling. Waiting for the temps around here to show some mercy !



CPU-Z validation:
http://valid.x86-secret.com/show_oc.php?id=24151

This is a 32M SuperPi run with cpu = 9 x 290 MHz, 2 x 512 MB PDP @ 2.5-3-3-8 1:1 1T 2.7V:



and it's CPU-Z validation:
http://valid.x86-secret.com/show_oc?id=24289

[Absolute_0]

Jedi, you can do 3 Ghz on air but you need 1.48 volts for 2.61 Ghz? i can go over 2.63 Ghz with stock voltage but i still can't go as high as your chip...

Anyway here is my max stable for an extended period of time, i bet prime could have run longer but i dont have infinite time


And here is my max suicide so far, 2.97 with 1.60 volts

[davidian]

...higher soon

[jcpsad]

Fastest SuperPi so far (CPU-Z Verified )


3DMark2001


3DMark03


3DMark05


Sandra + Temps + CPU-Z

[Zeus...]

Fastest SuperPi so far (CPU-Z Verified )

Nice overclock - what about prime95 ?

I can do - 2800 and 2900Mhz


http://valid.x86-secret.com/show_oc.php?id=24754 http://valid.x86-secret.com/show_oc.php?id=24752

and 2700 will do superpi32M and will bench 3dmark03 (3dmark05 it wont) but prime 95 large ftts seems to sort out the ones that BSOD and the ones that dont IMHO

[davidian]

Today I tested 2800MHz.



...more soon

[Minnyboy]

Here's my 3200+ Venice... Haven't tested for max yet... Just playing around ATM..

Codes:
0518 LBBLE
Vapochill PE TI
XP90 & 92mm Tornado
rest of specs in "his" rig in sig...

I can't remember rest of the date code, posted somewhere around here...

So far 2.65GHz @ 1.488v (as reported by SpeedFan)

50 hours Prime95 stable plus 3DMark03 loop at 1280x1024...

Here's some screenies of 3D01 ^ SuperPI (all tests) & PiFast as well:

[sluggard]

3000+ BH5@3,73v ultra-d vapo LS

1M


2M NB!- mem-timings should be same as on previous screenshot

[Benny Lodewijk]

0517 APHW LBBLE on air with Gigabyte G-Power Pro Cooler @ 3200 rpm, suicide screehshot



Validation : http://valid.x86-secret.com/show_oc?id=25623

[5-Clicks]

benny - do you use a Tagan 480w? SmartGuardian shows my +12v rail really low too...

here is the venice i just sold: LBBLE 0516CPBW


pathetic. i didn't raise the NB voltage though, but still...

[eage]

my 360w psu got a very nice rails then!!look!!no brand 360w

[TheMeatFrog]

For the most part I've been with out a decent set of ram since the day after I got this chip over 3 weeks ago. Since my new set of LEs arrived from OPB on the 1st and then earlier today the 7/2 bios was released I just had to play! I mean after all I've set a WR with this chip but we still haven't got to know each other.

Warmup, since the 0515 APAWs are know for a weak mem controller I just wanted to stress the CPU and not push the ram yet. BTW this is being Air cooled by my XP-90 in my Antec SOHO server case with the door closed.

SuperPI 32M
10 x 291 @ 1.55v
9:10 (180) mem divider


Time to push the memory and mem controller!

SuperPI 1M
10 x 291 @ 1.52v
no divider


1M at 2.91GHz was no problem as I expected but I was concerned about 32M...

SuperPI 32M
10 x 291 @ 1.55v


I was suprised at this result. I did not have to change a single timing. Lets move on to my final and my personal favorite test, Max 1M time.

SuperPI 1M
10 x 293 @ 1.52v


I could smell a 28 second 1M but I just couldn't pull it off. That should just about wrap it up, the pictures speak for themselfs. If everything goes according to plan I should have a 3000+ 0517 and some RedLine to play with sometime next week. Maybe with some RedLine running at 260MHz+ I'll be able to break the 28 second 1M mark on air so stay tuned!

[eage]

here is my screen shots!!anyway i cant hit 3G,in case my PSU is a 360W Thermaltake 20pins dude anyone can help me out ??i can get fully stable with 2.95G on 1.55V what do i need for more clocks??i use stock AMD Fan now.my BIG TYHOON soldbut samething only increase 6C on stock votage!

[exscape]

As posted in the 24hr primestable thread
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.

http://exscape.org/2800.png

[eage]

this one ?prime95 i can do more than 30hours ,but but.....i forgot to take a shot i have this one now. [IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[eage]

As posted in the 24hr primestable thread
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.

http://exscape.org/2800.png

this is mine 1.43V on AMD stock,too hot temp~~~anything greater than 55C will frozen .
[IMG][/IMG]

[tomati]

here is mine 3200+ 0517 bpew

ihs off ,26°c ambiant t°

spi 32M




prime 48h




edit : prime screen

[4rory]

I took out my 9800pro and poped in an old pci graphics card, it allowed for some better clocking, pc didn't shutdown at 1.65 anymore or 1.7 but i think 1.75 did shut down this is all voltages selected actually is -0.1v, I was able to get it to 3.2ghz before it restarted, didn't get a screeny tho but, On my way there I stoppedd at 2.99ghz for this.

I forget what the ram was at, this is a bad screeny I know but I had to do it twice lol becasue I clicked ok the first time after it was done.\\

Right now I got 18amps on my 12volt line, and 480watts total, Should I go down to 450 watts and 26amps on 12volt line, or should I go up to 520watts and more amps on the 12volt line.

[Absolute_0]

LOL 13A? wow thats low how many amps does that antec 550wat have? Right now I'm leaning for the 520modstream ocz.

Nice clocks there 4rory. And to think earlier you mentioend that you had a bad memory controller and had to use 1 dimm with max divider to go past 2.9, now you say you hit 3.2! Whatever you changed, excellent improvement, you've got a fine chip.

Yeah, you need something with more amps on the +12V rail. Modstream isn't bad, do you have the money for the 520 powerstream?

Anyhow, to stay relevant, here's my latest
0517 APJW 3000+ @ 2.86 Ghz

Now i am officially prime stable here, i have never let it run that long, no patience. Usually i run with less voltage because most of my tasks aren't as demanding as prime95, nothing important on my PC so works fine.

[OverClocker_gr]

These benchs are old and the vcore was way high my last tests with phase was 3250@ 1.66v...now i am with modded stock hsf because my single stage phase has a small prob.....

[jcpsad]

lowered my vcore a bit... 2808mhz at 1.63v

[starostise]

here is my new venice 3000+ 0517DPMW baught last week in a shop in Paris:






I'll see what it does with sp2004 when I'll have the time but somebody else have a venice 3000+ which pass OCCT at 2700@1.34V in air?
room temp was about 23°C

I saw that peter_lu had 2800@1.4V but the screen shows that he ran sp2004 for just 1min

[cpulloverclock]

update for my 3000+ 0517DPMW

soon 3.7GHz on cascade



frequency max spi 8M = 2983MHz but 5'02"1XX

[TheMeatFrog]

3000+ 0517APCW
Air Cooled by XP-90
SuperPI 32M

[Leverpospade]

3000+ 0520 EPMW
DFI NF4 ultra
1x512 MB A-data PC4000 (Have almost been killed, the only run memtest at max. DDR400).
Vapochill SE

24/7 - It haven't crached og lockup once.


My max screenable - so far. I can't get my FSB over 350 (This was med by blowing a 120 mm fan at the chipset cooler).

[[XC] 4X4N]

A new high for me Benchable 2.91 on air. Fails prime right away, but is fairly stable. Also a 32m at 2.8 which is 100% prime stable.

[LikwidKool]

Alrighty. I received a 3500+ CBBLE 0512 DPAW yesterday. So far so good. I can pass 8M Super Pi up to 2.9ghz (290x10 1.55v) If it passes 8M then it will do everything I need without a hiccup. 32m is just to damn long!

I can get a suicide shot at 3ghz but I can't do much other than browse. I tried 300x10 and 273x11 but nogo either way. Not to bad for a second hand cpu that I bought here for a great price!!! I have only had one other 2.8ghz+ cpu and it was a 3500+ claw that ran to damn hot. I am psyched to finally get a low voltage cool running 2.9ghz cpu!

[Cisko]

Dfi nF4 ultra-d
tccd adata pc4500
watercooling

@vstock

[by -=Merlin=-]

Hi





Merlin

[Perc]

Merlin: could you please tell us where you got this gem from? ewiz is selling the 3000 venice oem for 119$ and free shipping. can you imagine getting lucky and get a week 19th 3000 venice like this for 119$ and hitting 2900+Mhz. i'm tempted to order the 3000 venice from ewiz .

this chip right here week 19 from ewiz its a 0519DPJW LBBLE and heres the oc so far with a few benchies....

peace perc,

[Absolute_0]

My 0517 APJW running with a little more volts at 2.9 Ghz
2 hours prime stable and still going
(still air cooled by XP90)

[gundamit]

I picked up one of the Venice 3000+ CPUs that was being discussed in the Deals forum. At $115 I figured I could take a chance. I got a YBBLE 0524DPBW.

Early results are okay but not great. I'm SuperPi 32M stable at 2.7ghz on air. I think I'm pretty near the limit because I'm giving it almost 1.7v (1.55+13%) and that's usually where diminishing returns kick in hard. Surprisingly the Thermalright XP-90/Zalamn 92mm combo I'm using seems to be holding the temps at load to a MBM reported 42c.

I'm using the the shipping bios (3-10) on this new Ultra-D mobo and got my OCZ Platinum Rev.2 TCCD out of retirement. Still trying to tweak the settings a bit.

[gundamit]

I hand picked this Venice at a PCClub in San Leandro CA. Its a LBBLE 0517GPQW. I swapped out the YBBLE 0524DPBW and put this one in the very same rig. Thank goodness this handpicked CPU outperformed the less expensive one I bought "blind" from E-Wiz, otherwise I would be hitting myself in the head with a hammer right now. Looking good on air.



I just finished leak testing a Swiftech kit and I expect to see a little bump when I get it hooked up with this CPU. Hopefully I'll post results sometime this weekend.

The Winnie in my sig may be looking for a new home soon because my Mach 2 will be mating with this CPU whenever ATI gets their new mobos and video cards out.

[davidian]

Next test:

...more soon (I hope)

[Perc]

i got a ADA3000DAA4BP LBBLE 0519DPJW Z649556E 53772 venice from Ewiz. i just got started playing with the cpu and so far im able to run 3d stable at 2470mhz 270x9 2.5-3-3-7 using the stock v-core of 1.36v. ive tested the memory all the way up to 300htt at 2.5-4-4-7 1T 2.7v so now i just need to throw in a divider and see how high the chip will actualy run? i know the meory will run 300htt and i suspect more with a divider so my fingers are crossed for 2900-3000mhz


peace perc,

[ZX7891]

heres an attached screeny of my 0515FPDW
EDIT:on stock cooler

[atreju]

Here is mine;
3000+@2900
LBBLE 0516DPMW
1.68Vcore
chilled water, 7/8c idle 22/23c under load
DFI Ultra-D (no SLI mod) 7.04 bios
KHX 3500 BH5@241.5 2.2.2.6 3.4v (max 260 2.2.2.5) 3.4v
Leadtek 6600 non-GT

and this is the screen; (it's too hot here in Turkey, so these are not the max)