fx57 2d runs with ln2

[nachthymnen]

Congratulations
Amazing chip!!!Are you running win 2003?
I think you will be able to broke the 21" 1M with a little more tweaking...
Regards Master!!!

[VoRtAn_MaDgE]

I am not the best PI tweaker around. I usually just set the clocks and let it rip, so any suggestions on how to get my times lower using OS or registry tweaks are always appreciated

Use the search option in the forum and type superpi tweaks...u might find something to work with

that fx is awesome...cold bug at wich temp?

How about a suicide shot? 4.1Ghz maybe?

Congrats Kingpin

[k|ngp|n]

Got the clocks up some more Almost 4gh benchable superpi 1m!

Need to check duck's thread, but these may be new 1m and 8m WR's:
Times can still get much better with more tweaking. Just pushing the cpu here:
1m

validate:
http://valid.x86-secret.com/show_oc?id=62805

8m

validate
http://valid.x86-secret.com/show_oc?id=62808

Broke into 30.** pifast also This is def AMD WR lol:

validate
http://valid.x86-secret.com/show_oc?id=62806

and here is one you guys will really like. Almost 4ghz stable for 1m:
Time aint all that because I ran it it a second time without rebooting with maxmem, which always give a bad time.


4ghz 1m will be nuts when I get it.....

[charlie]

simply amazing!

[Willis]

simply amazing!

²that

[Willis]

simply amazing!

and why not ³ that as well

[blind_ripper]

i say wtf go 4ghz k|ngp|n , thake te ss wr to :p .
give it 1.8v

[fredyama]

Congrats k|ngp|n on your new AMD modPI/1.4 1M WR

I have to work hard at next LN2 bench time

Cheers,

fredyama/PRTeamJapan

[k|ngp|n]

Congrats k|ngp|n on your new AMD modPI/1.4 1M WR

I have to work hard at next LN2 bench time

Cheers,

fredyama/PRTeamJapan

thank you fredyama/...I need to figure out your awsome PI tweaks so I can really compete with you guys

[Willis]

thank you fredyama/...I need to figure out your awsome PI tweaks so I can really compete with you guys

perhaps some a64 tweaker shots would be nice

[k|ngp|n]

perhaps some a64 tweaker shots would be nice

My a64 tweaker timings are about as tight as they can go. When I say tweaks, I mean OS and registry tweaks + ramdrive

These are the timings that my ram can run over 270 below. Only thing different on these 3950+ pi runs was preamble at 5.0 and tras at 5 for better stability.

[Willis]

why 100mhz 1.95 microsec?
tried 200 mhz and XX microsec?

[Piotrsama]

1M Super Pi is yours

It benched better at 3984 than at 3996, strange...
EDIT: Oh, HTT was lower on the second run.

[k|ngp|n]

1M Super Pi is yours

It benched better at 3984 than at 3996, strange...
EDIT: Oh, HTT was lower on the second run.

When you use maxmem104 tweak, you have to reboot after every run or your time gets penalized by like .3-.4 sec. After I ran the 3984 run, I didnt reboot and just bumped the clocks up to 3996 and re-ran thus the lousy score. On a fresh boot, it might have been 21.1* sec or around there

[NiCKE^]

Very nice, but why didn't you do any 2M and 4M?

[k|ngp|n]

Very nice, but why didn't you do any 2M and 4M?

Damn I forgot. I'll do it next time promise I ran these benches in about 10min at the very end of a 3d session today, then I had to shut down.

[tHe_jOkeR]

Go for 4Ghz!
3Mhz left

amazing!

greetz

[Kaffebord]

What a fight! Love to see them fighting for the top.

Come on japan, beat him down in his boots

Good work Kingpin! Push it 3Mhz more and tweak it to it screams for 20s.

[guess2098]

this is cool man!!!

i am going to try some 57 later.... havn't play for long time after the death of my 57 ....

[NiCKE^]

Damn I forgot. I'll do it next time promise I ran these benches in about 10min at the very end of a 3d session today, then I had to shut down.

Okey, thank you very much

[dinos22]

When you use maxmem104 tweak, you have to reboot after every run or your time gets penalized by like .3-.4 sec.

maxmem104 tweak..........can you tell us more about this

great work benching at 4GHz (absolutely amazing)

[nfm]

hey k|ngp|n

I attached all regtweaks in 1 file that can speed up calculation. I included one of the most important ones All tweaks are labeled inside, oped with something like notepad to check them out

will work on xp, x64 xp and servers, server 2003

That's only 2.47kb. Unzip it and double click on .reg file, press yes to apply them and reboot. PM me if you want more.

[dinos22]

hey k|ngp|n

I attached all regtweaks in 1 file that can speed up calculation. I included one of the most important ones All tweaks are labeled inside, oped with something like notepad to check them out

will work on xp, x64 xp and servers, server 2003

That's only 2.47kb. Unzip it and double click on .reg file, press yes to apply them and reboot. PM me if you want more.

so you manually run each tweak or what.......

what do you guys think Japs are doing better besides running on Win2003 and some of the tweaks people are commonly using

[nfm]

so you manually run each tweak or what.......

what do you guys think Japs are doing better besides running on Win2003 and some of the tweaks people are commonly using

Double click on RegTweaks.reg and press yes to add it to the registry.

All tweak are applied at once, that's just a basic .reg file entry. You don't need to go through registry and change any values

[Zac89]

that pf57 is really amazing!!!