0.09 3200+0433SPMW
MSI K8N NEO4 Ultra 0443 A3
Apacer Real500 TCCD 256MBx2
XP-90+SanyoH4011
0.09 3200+0433SPMW
MSI K8N NEO4 Ultra 0443 A3
Apacer Real500 TCCD 256MBx2
XP-90+SanyoH4011
I had 3 x 3200+ 0441 and best went through superpi8m 2550Mhz 1,65V....Originally Posted by viccyran
I got a 3000+ Winchester today. It's a 0444. Here's a screenie with super pi i got in 30 mins of playing.
www.siliconservers.net/34s.jpg
Oh, and btw, it's on stock cooling for now.
what kind of memory have u got?Good timings as well....I got a 3000+ Winchester today. It's a 0444. Here's a screenie with super pi i got in 30 mins of playing.
www.siliconservers.net/34s.jpg
Oh, and btw, it's on stock cooling for now.
It's OCZ PC3200 Plat. Rev.2 TCCD. They can do better, they were relaxed in purpose.
My 3000+ winnie(0441 SPMW I think) will do SPI and pifast at 2650 ( 32 sec SPI).
I just got a new 3500+ NC ( 0438 Spew), and this hunk a junk wont even do 2530 !!
Gee I'm sure glad I bumped up to the higher multi's.....
Zen2 Has brought AMD back!
very nice results qk, you got a sweet chip, and 30sec 1m is huge for air.
Just got 33s superpi 1m on the 3000+ winnie, and max 2871mhz non benchable. Should get 32s with mem 1:1.
What is your memory speed @ 2871? is it 1:1?if it is not 1:1 what is it?Just got 33s superpi 1m on the 3000+ winnie, and max 2871mhz non benchable. Should get 32s with mem 1:1.
It's not 1:1, i think it was 166 divider, probably around 261. I'll reproduce it in a bit and post the right numbers. I'm trying to use the A64 Tweaker, but it's not working, i set something and it sets back the previous value. And it's showing mixed up values.
Edit: It was 133, mem at 205. Gotta try 150 divider with superpi.
Edit2: Mistakenly i was using slot 1&2 for memory, changed it to 3&4 and just got 32s.
http://www.siliconservers.net/32s_1.jpg
Last edited by bofh; 12-19-2004 at 01:35 PM.
i have a week 37 3200+, and i couldn't go higher than 225 mhz 1:1 but i decided to play with the mem divider...
now i'm running 9 x 280 on the cpu and 229 mhz on the ram. did super pi, but i haven't tested anything else. just thought i'd share with any unfortunate week 37 ppl... maybe the memory controller can't handle faster speeds. but u can always use the mem divider to increase the cpu speed only.
Shuttle: SN95G5 v1.3 - BIOS: "Q"
CPU: AMD64 3200+ 90nm Wk37 @ 2.430 GHz (270x9 @ 1.5v)
RAM: 2x 512MB PQI Turbo PC3700 @ 221 MHz 2.5-4-4-8 (1T) @ 2.6v
HD: Maxtor DiamondMax 10 200 GB
Video: XFX GeForce 6600 GT fanmated
Optical: Pioneer DVR-108
Display: 2x Samsung 173T DVI
I picked up one of the newest winchesters i've seen the other week [0444]. Haven't had much time to test it, but so far i've had it prime stable at 255x10 with only 1.52v to the core.
I can't seem to get much past 250HTT at the moment due to all these I/O problems but i'm gonna see how far it goes as soon as they're sorted.
just got my winnie 3000 and neo2 0411 board
its a week 45 chip but i wont be able to do anything till tomorrow tho when the rest of my kit arrives
hmmm jaffa cakes
question, how do you tell what board your neo2 is?
If you mean how do you tell what chipset revision you have, you just pop off the chipset cooler and wipe off the goop. The date codes and revision are on the chip itself. If you are not sure what you are looking at just post a pic and we will let you know.
how wasy is it to pop off the chipset cooler? any particular tools i need?
squeeze 2 pushpins and off it pops , so easy even a 5yr old could do it
hmmm jaffa cakes
Good steppingjust got my winnie 3000 and neo2 0411 board
its a week 45 chip but i wont be able to do anything till tomorrow tho when the rest of my kit arrives
My new cpu Winnie
ADA3200DIK4BI
CBBHD 0447 TPEW
1152427L40054
well i will find out tonight as im about to build itGood stepping
hmmm jaffa cakes
I wish you loads of luck
Just tried today a 3000+ CBBHD 0445 RPMW (same stepping tho'), didn't even want to post at 2.7GHz wit 1.6V.
Now I'm running a CBBFD 0444 TPMW at 2.7GHz 1.6V aircooled prime95 stable.
A big "f#$k you" to epox for their extremely low BIOS voltages
Last edited by caligula; 10-05-2006 at 12:59 PM.
Web-browsing machine: Q6600@3.6GHz/1.4V | Andy Samurai/AC AF12025 | MSI P35 Neo2-FR | 4x1GB Hynix DDR667@500 MHz 12-4-4-4 | Sapphire HD3870 | Audigy2 ZS | DeLUX 600W PSU| Toshiba 37WL67ZG TrueHD 1080i
Max Screen -> Aircooling Box AMD , 1.6v biosGood stepping
My new cpu Winnie
ADA3200DIK4BI
CBBHD 0447 TPEW
1152427L40054
Prime95 stable?
Web-browsing machine: Q6600@3.6GHz/1.4V | Andy Samurai/AC AF12025 | MSI P35 Neo2-FR | 4x1GB Hynix DDR667@500 MHz 12-4-4-4 | Sapphire HD3870 | Audigy2 ZS | DeLUX 600W PSU
He said "Max. Screen"! U really think that is Primestable?!
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
Quick question.
If I use the 1.41b bios, or any, then the vcore is always .5 higher in the bios, than in reallife. Correct?
www.bash.org-----own3s
You mean .1 ?
Zen2 Has brought AMD back!
Posting Permissions
Reply With Quote
Bookmarks