Finally got me a few nVidia 6800 Ultra cards, MSI.
I'm gunna test them on a couple of Swiftech MCW-50 Tec blocks today.
Looks like fun, see if I can't get into the Top 20 on the ORB
OPP
Finally got me a few nVidia 6800 Ultra cards, MSI.
I'm gunna test them on a couple of Swiftech MCW-50 Tec blocks today.
Looks like fun, see if I can't get into the Top 20 on the ORB
OPP
Last edited by OPPAINTER; 03-25-2005 at 11:44 AM.
Somehow I think you wont have a problem getting into the top 20 there OPP.
Look forward to the results as usual.
Edit: is that the DFI board?
RIP Dad. I will miss you always.
Q6600,DFI X48 T2R,280 GTX,4gig ReaperX,XiFi Prelude,LL TYR PC X-2000,Westinghouse 37,Klipsch 5.1 Ultra
Yeah, somehow I don't think you're going to have any problems getting into the top 20 OPP
Chunky: it is MSI...
Opp: If you are trying for 05, you might want to try out the newest driver 76.41 (came out today and looks like it is the fastest for 05 of the bunch)unless u whql only...
http://downloads.guru3d.com/download.php?det=1022
Good setup buddy,
Besure to press:
shift F2(press together) and then alt f3
and use ati/nv speed up to OC your video card.
like this you will see under bios.
Thanks for the info guys. I still have to build a couple water loops. After that, it's on
OPP
looking good, what chip you using with that killer setup?
I'll be useing a FX55.Originally Posted by mushk1n
OPP
OPP,
I think the swifty's will work really well with that...
TEAR IT UP!!
MSI board, right? Looks to have GREAT spacing between cards... that's the ONLY place that DFI fell asleep with their NF4 series....
C
Last edited by charlie; 03-25-2005 at 11:02 AM.
The DFI have the Same Spacing between slots as the MSI, they both have 1 slot between them.
OPP
Before I fire this thing up, does anybody know were to measure the core voltage on these 6800s?
OPP
Last edited by OPPAINTER; 03-25-2005 at 11:55 AM.
Left side of this resistor (+) and any ground for VGPU. Your voltage will increase once Windbloze loads the drivers so don't start too high. VR-Zone has a nice BIOS mod for an extra .1v also. I got my cards to 1.77 with pencil/BIOS mods.
Last edited by 2fast4u; 03-26-2005 at 06:56 PM.
The ASUS is the only board with good spacing, but, we know how well that board does.
The VREG is the same as the AGP versions. Shamino has the info right here:
http://www.vr-zone.com/index.cgi?i=926&s=1
And the memory mod:
http://www.vr-zone.com/index.cgi?i=1622&s=1
MSI K8N Diamond
2 x 6800 Ultra PCI-E
Innovatek NV40
AMD 64 3200+
I used the VRZone info for modding, but on the VRZone picture the measure point doesn't exsist on my card, my card looks different.The ASUS is the only board with good spacing, but, we know how well that board does.
The VREG is the same as the AGP versions. Shamino has the info right here:
http://www.vr-zone.com/index.cgi?i=926&s=1
And the memory mod:
http://www.vr-zone.com/index.cgi?i=1622&s=1
I have measure two places, one reads 1.58V and the other reads 1.1V, neither sound right to me.
OPP
When I measured mine, I used the one that is directly in line with ic's 5&6, right to the left on your pic. I got around 1.42 V.I used the VRZone info for modding, but on the VRZone picture the measure point doesn't exsist on my card, my card looks different.
I have measure two places, one reads 1.58V and the other reads 1.1V, neither sound right to me.
OPP
MSI K8N Diamond
2 x 6800 Ultra PCI-E
Innovatek NV40
AMD 64 3200+
I guess the mcw50-t are just narrower than I remember... on my DFI-SLI, with default ASUS coolers there was nearly NO space!!
C
Are you sure on that boss? sure it's just one slot on both but i think MSI has some more milimeters to play, I say this because one of my MCW50-T's does not fit between the cards, unless I'm doing something wrong.
But the MSI Plat. and Diamond are the same as the DFI.. I have a Diamond and use its SLI bridge on DFI at the moment as I am modding a DFI Ultra into a SLI.
OP are 80Watt pelts gona be enough?
Last edited by FROG; 03-25-2005 at 02:58 PM.
Well, I think we'll find out soon
I think it'll be FINE
Last edited by charlie; 03-25-2005 at 03:16 PM.
The coolers are colder then straight water so thats why I'm useing them, they will be fine untill my Cascade is ready.
I'm waiting for JB weld to dry on my ehiem for my second loop. I thought I had more water stuff in my garage but my Pumps and Rads suck
Won't be able to play until tomorrow, I have one card now. It reads 10c.
OPP
Nice OPP. So what's going to be powering those TECs? The 17X watters too or something else?
edit: Cross posted
http://www.vr-zone.com/?i=926&s=1
Last edited by texuspete00; 03-25-2005 at 11:15 AM.
These are 80W pelts, I have a 25amp supply here that runs at 13.7V, my Radio Shack speacil
OPP
This is gonna be good! You got a taste of SLI from Equito now you want some of your own do you?!
Be sure to pop into this thread with your results when you finish
*** The XS SLI 3DMark 05 and 03 Top 10 List ***
Do you wanna give me one?
Good luck with those cards
OPP , maybe u can do something with this
Its my XFX 6800GT
CPU : Intel Core 2 Extreme QX9650
MB : Asus P5E X38 Rampage bios
RAM : Team Xtreem 4x1GB DDR2 OPB handpicked
VGA : Sapphire 4870
Power : Antec Quattro 850w
Storage : 1 x 60GB OCZ Vertex + 2 x 750gb WD 32Mb
DVD : Samsungs DVDwriter Sata + Liteon DVD
Sound : Creative XFI Xtrememusic
Cooling : D-Tek Fusion + D-Tek Fusion GFX
Monitor : Samsung 226BW
Errorcode : An error occurred at address AC 20 DE AE FF BC ...... System halted.
Posting Permissions
Reply With Quote
Bookmarks