The Official Venice Overclocking Thread

[gundamit]

I hand picked this Venice at a PCClub in San Leandro CA. Its a LBBLE 0517GPQW. I swapped out the YBBLE 0524DPBW and put this one in the very same rig. Thank goodness this handpicked CPU outperformed the less expensive one I bought "blind" from E-Wiz, otherwise I would be hitting myself in the head with a hammer right now. Looking good on air.



I just finished leak testing a Swiftech kit and I expect to see a little bump when I get it hooked up with this CPU. Hopefully I'll post results sometime this weekend.

The Winnie in my sig may be looking for a new home soon because my Mach 2 will be mating with this CPU whenever ATI gets their new mobos and video cards out.

[davidian]

Next test:

...more soon (I hope)

[Perc]

i got a ADA3000DAA4BP LBBLE 0519DPJW Z649556E 53772 venice from Ewiz. i just got started playing with the cpu and so far im able to run 3d stable at 2470mhz 270x9 2.5-3-3-7 using the stock v-core of 1.36v. ive tested the memory all the way up to 300htt at 2.5-4-4-7 1T 2.7v so now i just need to throw in a divider and see how high the chip will actualy run? i know the meory will run 300htt and i suspect more with a divider so my fingers are crossed for 2900-3000mhz


peace perc,

[ZX7891]

heres an attached screeny of my 0515FPDW
EDIT:on stock cooler

[atreju]

Here is mine;
3000+@2900
LBBLE 0516DPMW
1.68Vcore
chilled water, 7/8c idle 22/23c under load
DFI Ultra-D (no SLI mod) 7.04 bios
KHX 3500 BH5@241.5 2.2.2.6 3.4v (max 260 2.2.2.5) 3.4v
Leadtek 6600 non-GT

and this is the screen; (it's too hot here in Turkey, so these are not the max)

[by -=Merlin=-]

OMG WOW

I work still new bios DFI NF4 ram tabl 3.16



Merlin

[Mr.President]

prime @ 3ghz


& superpi 1mb (wenn das ding nur 1mb chache hätte......)

[fxr91]

3000+
ADA3000DAA4BP
LBBLE0521APMW
DFI NF4 Ultra-D

Air cooling is running at a low speed so my ears don't bleed (Venus 12), which is why my temps are getting a bit high. Intend on getting my w/cooling out and strapping it in place again, just need to find time. Also will be strapping my LS to it just to see what it can do with some sub zero cooling.

Ram is woeful, so the system running at 150 divider, but hopefully that will be resolved in the next couple weeks BTW, this is a stable 24/7 system, not a suicide.

[Bamboo]

Those are some great OC you guys have.

Me, on the other hand, like to do OC at the cooler side, do not like to raise the voltage to over 1.4.

[overcrash86]

OMG WOW

I work still new bios DFI NF4 ram tabl 3.16

http://hslab.pl/Merlin/Pics/FSB_375.jpg

Merlin

Merlin BIOS 03/07/05

can i test your new 10/07/05 merlin ?
where can find it
(or PM me to test )

[Absolute_0]

my 3000+ 0517APJW
stuff in sig, except watercooled
Storm G4, Maze4, D5, 2-302 heatercore

4.5+ hours prime95 @ 2.95 Ghz w/ 1.66 volts

[knob]

my results.

LBBLE 0517 GPMW. Its not flash i know

[knob]

latest. Dont look at the vcore. Terrible isnt it? Running 510-1 bios

[Absolute_0]

Got 2.96 Ghz fully stable

I clockgenned up in windows before i started SP2004 running, so the CPUZ reading is correct, its 2955.3 Mhz. Also SP2004 is saying the incorrect time, i started ~1:28 AM and let it run overnight.

[eage]

new week 0525 APMW E6 core!i can do 1.26V but prime95 only stable 5hours!!

[afireinside]

3500+ LBBLE 0519 venice under dry ice -65C load

[Mysterfix]

Well I've got a new board on the way as this one has some issues. But I still got a pretty good OC out of this thing with my Vinnie.

[IMG][/IMG]

Chip: LBBLE 0517

Colling in sig

[Absolute_0]

3 Ghz is stable with 1.73 volts...

Here is 2.99 stable with 1.7 volts, and i'm trying to bring the Vcore down even more

[trans am]

air cooled just got this from newegg
retail 3000+
hyper6 cooler

[umnik]

hi all
my 3000+ ybble0523cpgw
asus a8n-sli

294х9 Very badly I in a shock dear edition

[oasked]

Yay!

http://valid.x86-secret.com/show_oc?id=30887

Finally got my RAM working at 300 (Super Pi 32M and OCCT stable so far), thanks to the new 623-3 BIOS for the DFI nF4 Ultra-D. CPU is still at the same speed as before, it hates going much higher, the voltage just ramps really after this point.

I should be able to lower the CPU voltage a bit as I had it at 270x10 24h stable at 1.45V before.

[boblemagnifique]

Venice 3000+ CBBLE 0512 DPBW
Gigabyte K8n Sli F2
2*256 Adata BH5
Xp90c + Papst 8412N/2G (40Cfm)




2700mhz at 1.37v (300x9)




2820mhz at 1.5v (313x9)

[SIOUX]

here´s my 3000+ 0529 still testing...

[Xyus89]

here's my 0528 GPFW , at 2700mhz it freezes/reboots (I think a bad cpu )




Xyus

[Mysterfix]

This chip will do 2.832ghz stable but doesn't play nice with the ram at that speed. Both were tested seperately and ran fine but won't run together at max cpu speed.
3000+ Venice LBBLE 0517APJW
VCORE 1.74v (Reads higher in cpu-z pick due to fluctuation)
Water cooled
Temperatures idle 30ºc-31ºc/load 40ºc-41ºc
Specifications of System: In sig
Stability Tests: Prime95, 3DMark 01 03 05, Memtest86