These TCCD chips are weird, could run them at 300 2,8v stabel and now i have to run them at 2,6v or lower to get them stabel at 270. Wtf is happening ?
These TCCD chips are weird, could run them at 300 2,8v stabel and now i have to run them at 2,6v or lower to get them stabel at 270. Wtf is happening ?
CM-Stalker Evga 8800GTX
Gigabyte GA-P35-DQ6 Q6600 3,8Ghz 726B
Crucial DDR2 BallistiX PC6400 4x1 Gig
Black ice Extreme II 4x Titan 120mm APOGEEGT
Thermaltake Toughpower 850W
Summer heat? Do you have a fan blowing over them? In my experience, TCCD runs really hot under higher voltage, so that could be a factor. Also, same board, bios, and cpu as before? Same memory slots?
Why is less Volts a problem?
i7-960@4.2GHz/Rampage III Gene/3GB KHX14400/HD5670
Because if you read his post he can only get to 270 and before he could do 300.
Nothing has change, only my mem that now hates anything over 2,6v. My case temp is around 28c so it hasn`t anything to with that. Tried also to change mem slots but with the same resault. I also tried to take of the heat spreaders and it was a bit better but a no go.
CM-Stalker Evga 8800GTX
Gigabyte GA-P35-DQ6 Q6600 3,8Ghz 726B
Crucial DDR2 BallistiX PC6400 4x1 Gig
Black ice Extreme II 4x Titan 120mm APOGEEGT
Thermaltake Toughpower 850W
So are the heatspreaders still off then? That is good, but you should still have a fan blowing over them, even with 28c case temps.
Posting Permissions
Reply With Quote
Bookmarks