Noooo.....Originally Posted by cpulloverclock
on wc with a venice now
I hate you so much right now... just kidding awesome job there
Here's why I 'hate' you
Noooo.....on wc with a venice now
I hate you so much right now... just kidding awesome job there
Here's why I 'hate' you
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:........
not lucky
at 2976MHz I get 39.71
I love XS
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
32.99 sek
at 3854 Mhz but the ramspeed is bad. Memkontroller no god at -120 c
Best OC Regards
Tom Holck
Denmark
The Homeland of nVentiv and Asetek
Nice work Tom... now throw some BH5/OCZ VX/Mushkin Redline at it... like 270 or so32.99 sek
at 3854 Mhz but the ramspeed is bad. Memkontroller no god at -120 c
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:....
It is Mushkin Redline, they can go 280+ fastest timings on air, but the cold bug hold the Memkontroller back in the CPU....Nice work Tom... now throw some BH5/OCZ VX/Mushkin Redline at it... like 270 or so
Best OC Regards
Tom Holck
Denmark
The Homeland of nVentiv and Asetek
Tom, does the memory controller give the same problems with 2x 256mb ram?
That's a real shame... maybe 2x256 helps like Jack suggests...It is Mushkin Redline, they can go 280+ fastest timings on air, but the cold bug hold the Memkontroller back in the CPU....
Awesome cpu speed anyway :thumbsup:
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:....
on WC
FX-25 cuz I have the 310p bios
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
This is on p4gd1. With p4c800, score will get lower I am sure of it, close to full second. Never thought 30.** for hexus pifast could go down so soon.....
That dothan is working really nice under LN2
nice k|ngp|n, the Fx57 can't do that. The ramspeed is not mutch better than Fx trotteling speed
This is on p4gd1. With p4c800, score will get lower I am sure of it, close to full second. Never thought 30.** for hexus pifast could go down so soon.....
I might try that dothan on my cascade
Best OC Regards
Tom Holck
Denmark
The Homeland of nVentiv and Asetek
from MMOUSE,31.80s at 3750mhz is doable Tom !
The OC' kid is back...other than japs with the old sledgehammers, that is best pifast on fx I have seen to date..tighter than nails on the ram too.... gfj manfrom MMOUSE,31.80s at 3750mhz is doable Tom !
Last edited by k|ngp|n; 07-21-2005 at 12:14 PM.
Pifast 10M a 3171MHz
AMD WR with a non extreme cooling?
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
Celeron ''Northwood'' 2.4GHz @ 3651MHz
Validation
Intel Celeron 2400 @ 3651MHz
Epox EP-4GEMI rev 0.1
Corsair TWINX512-3200LLPT v1.1 (BH-5) @ DDR406 3.1v
Prometeia Mach I r134a
There's more left in the CPU, but the motherboard is too crappy to bench it higher. (I actually ran Pifast @ 3740MHz w/o error but the system crashed when I tried to start CPU-Z)
always on wc
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
By New Beetle
29.27s
M/B：ASUS P4P800-SE #2 Mod + CT-479 / 55MM339*** / BIOS：1009se.004
M/B Bed：「V-TEC ARC Bed Rev.3.3」
CPU：Pentium M 780 / 7506B***
CPU Cooling：「V-TEC ARC Pot Rev.12.0XE」＋LN2
Chipset Cooling：「Tara-chan First Version」+ DICE
Memory：SanMax SMD-51225 B-V PC3200 512MB x2 /DDR400 / CL2.0-2-2-5-4-A-A-A
VGA：ATI XPERT 98 PCI 8MB
HDD：IBM-DTLA-307030 /U-DMA 5 (ATA100)
Power Supply：OCZ PowerStream 520W
Vcore：1.85V（Actual）/ Vddr：3.43V（Actual）/ Vio：3.65V（Actual）
OS：Windows Server 2003
congrats NewBeetle
awesome score possible only with a dothan 780
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
I dunno, these Dothans are kinda lame. That's like SuperPi competing againsr SuperPi SSE2 patched..I mean how you gonna beat that with an AMD. It's just impossible, so where's the fun
Here's jason's latest:
nice
Road to CompTIA A+ (601, 602) and Network+ (N10-003) Certifications
I want a Penryn 3.33G 12MB & quad sli Nvidia G92
Incredible scores by NB.By New Beetle
29.27s
M/B：ASUS P4P800-SE #2 Mod + CT-479 / 55MM339*** / BIOS：1009se.004
M/B Bed：「V-TEC ARC Bed Rev.3.3」
CPU：Pentium M 780 / 7506B***
CPU Cooling：「V-TEC ARC Pot Rev.12.0XE」＋LN2
Chipset Cooling：「Tara-chan First Version」+ DICE
Memory：SanMax SMD-51225 B-V PC3200 512MB x2 /DDR400 / CL2.0-2-2-5-4-A-A-A
VGA：ATI XPERT 98 PCI 8MB
HDD：IBM-DTLA-307030 /U-DMA 5 (ATA100)
Power Supply：OCZ PowerStream 520W
Vcore：1.85V（Actual）/ Vddr：3.43V（Actual）/ Vio：3.65V（Actual）
OS：Windows Server 2003
I want to run some pifast on the p4p/p4c now
Posting Permissions
Reply With Quote
Bookmarks