OCZ DDR Diagnostic Booster Works on these Motherboards.

**ShawnMcGrail** · 07-02-2005, 06:00 PM

Bump?

**eBoy0** · 07-03-2005, 11:11 PM

Don't know if it was mentioned, but it works on the DFI Nf3 Ultra-D, self tested

**Nohto** · 07-09-2005, 09:21 PM

Andy, or anyone else for that matter. What about a MSI K7D-Master running 2 1800+ @ 2400MHZ each and 2 gigs of Kingston non registered ram. That leaves 2 slots open.

bump

**~~BB mods's~~** · 07-11-2005, 03:08 PM

Any new's on the dfi-875p-t and high voltages?

**andyOCZ** · 07-12-2005, 12:58 AM

Originally Posted by Nohto

Andy, or anyone else for that matter. What about a MSI K7D-Master running 2 1800+ @ 2400MHZ each and 2 gigs of Kingston non registered ram. That leaves 2 slots open.

I do not personally recall anyone testing this board. I did find this: http://www.ocforums.com/showthread.php?t=320663

So somone at OCZ must have had word form a user or tried it. Apparently VTT won't track, rendering the extra voltage useless.

Sorry

**Nohto** · 07-12-2005, 11:29 AM

Ok, thanks for letting me know.

**ShawnMcGrail** · 07-12-2005, 01:41 PM

Okay, Well the Asus P4S800 works for up to 3.9v on no-name RAM Via 12 minutes ago.

**andyOCZ** · 07-12-2005, 11:03 PM

Originally Posted by ShawnMcGrail

Okay, Well the Asus P4S800 works for up to 3.9v on no-name RAM Via 12 minutes ago.

Very good to know. Thanks!

**~~BB mods's~~** · 07-16-2005, 01:21 PM

Originally Posted by BB mods's

Any new's on the dfi-875p-t and high voltages?

bump

**mare87** · 07-18-2005, 05:49 AM

has any one tried running the booster on Epox 8rda+ rev. 2.0?

I would like to know...

Regards

**RocKer** · 07-18-2005, 06:42 AM

Originally Posted by mare87

has any one tried running the booster on Epox 8rda+ rev. 2.0?

I would like to know...

Regards

Is it 8rda+ rev 2.0 or is it 8rda3+ rev 2.0,becaus if it is 8rda3+ then the booster works on it,only 3.4v thoug.

**mare87** · 07-18-2005, 08:21 AM

it is 8rda+ rev 2.0

**SoF** · 07-21-2005, 04:49 AM

Originally Posted by MAValpha

Abit NF8 WILL NOT FIT. Picked one up at CompUSA- first slot has a cap too close to the DIMM, second slot means that the Booster is blocking the first. Board went back same day.
Didn't trying bending anything, didn't want to risk the board or Booster.

Damn you Abit, why couldn't you be normal and put in three slots?!?! *Shakes fist angrily*

if it's only this - just turn the poti to the other side or where ever you want.
my ones modded in this way to fit in the 4th slot of a k8nxp-9/k8nxp-sli.

was nicht passt wird passend gemacht, ist doch nicht so schwer ^^

**Gauss** · 07-21-2005, 03:47 PM

What about a Gigabyte motherboard with nforce4? The K8NXP-SLI. Is it compatible? This mobo sucks for Vdimm so it would be nice to use the Booster with it.

**mare87** · 08-06-2005, 02:03 PM

I have a question for Andy or someone at OCZ. Why is Leadtek`s K7NCR18D board on your page marked as N and on my Chart which came with the booster marked as compatible? So the booster works with Leadtek K7NCR18D Pro and Pro 2 boards or not?

**sja360** · 08-07-2005, 11:09 AM

anyone confirm the ocz booster rev1 or 2 works in the asus a8v rev2 deluxe?
i've read all 15 pages and there's not one saying "yes the booster and a8v work"

**mrlobber** · 08-11-2005, 10:49 AM

How about the Booster and Asus P4GD1?

**~~BB mods's~~** · 08-11-2005, 11:48 AM

Nice suport here.

.has any one else tried the booster on a 875p-t???? i get no post at 3.2v on the booster..ill try again at higer voltages.

**Lestat** · 08-11-2005, 12:22 PM

MSI K8N Neo2 Platinum 3.4V <-- according to OCZ

i can tell you right now the NEO2 will handle 3.6v (tested with DMM on the mobo) as thats as far as i tested with a certain kit of ram...

bb_mod's knows what kit

and BB looks like the 875LE only goes to 3.1v so its possible the PT only goes to 3.1 also.. which just sucks but you also can not use the 24pins with the booster unless you were to extend the length of the other four from the atx plug.

**msimax** · 09-03-2005, 09:17 PM

jetway939gt4 anyone know if the ocz booster is compatible with this mb

**TMFX** · 10-22-2005, 06:19 PM

Originally Posted by Joe Camel

well, i just grew balls (or REALLY need to sleep...)
OCZ DDR Booster is in and running on my AV8
DDR @ 3.0V and DDR VTT is tracking (reads 1.54V)
upping on the fly...3.3V but VTT is still 1.55...3.4 but 1.5...

upped (in bios) DDR to 2.8 (max)...booster@3.2V VTT@1.66

could be bios setting could be reboot...

not real stable or "Mushie 222 rev 2"s ("new"? TCCD) dont like >3.0V...

be ready to get a fan on your MEM...pups got HOT!

Where is the VTT option of AV8?

**andyOCZ** · 10-22-2005, 07:05 PM

Originally Posted by TMFX

Where is the VTT option of AV8?

There is no option for VTT. He was saying that as he adds DDR voltage the VTT follows like it should. Some boards will not do this.

**Desk-Star** · 12-16-2005, 07:17 AM

HI!
I was lookin around, and i couldn't find out if DFI Ultra Infinity NF4 is compatibile
with OCZ DDR Booster.

DFI Ultra Infinity NF4 isn't mentioned here
http://www.ocztechnology.com/display...ocompatibility

so i wonder, if i can plug in BOOSTER? And if i can , in witch slot?

I would be grateful if someone could answer my question.

**Desk-Star** · 12-19-2005, 02:08 PM

Anybody?

**RyderOCZ** · 12-19-2005, 09:35 PM

Originally Posted by Desk-Star

HI!
I was lookin around, and i couldn't find out if DFI Ultra Infinity NF4 is compatibile
with OCZ DDR Booster.

DFI Ultra Infinity NF4 isn't mentioned here
http://www.ocztechnology.com/display...ocompatibility

so i wonder, if i can plug in BOOSTER? And if i can , in witch slot?

I would be grateful if someone could answer my question.

That motherboard is a 24pin model...we do not test the booster with any 24pin boards because the booster harness is only 20pins.

Thread: OCZ DDR Diagnostic Booster Works on these Motherboards.

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions