NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!

[Thanatos]

Hi @ All again!
So here there is a stable system with my Venice 3000+ @2700 1:1
and my A-DATA DDR566 sticks running @300 and timings 2,5-4-3-7 1T

Be well and have fun!

[KenLau]

All valid entries have been added!

@KenLau

to XS, man! Oustanding clocks there

Hi,Bachus
thanks a lot !! I'm glad to join the XS too !
I"m also run more tests with this nice tccd,
347mhz (DDR 694) 3-4-4-8-1T /2.8V Super Pi 32M passed
360mhz (DDR 720) 3-4-4-8-1T /2.9V Super Pi 4M passed
300mhz (DDR 600) 2.5-3-3-6-1T/2.7V Memtest86 test #5 passed 84 tests
360mhz (DDR 720) 3-4-4-8-1T /2.9V Memtest86 test #5 passed 53 tests
and here are the screen shots

[bachus_anonym]

All latest valid entries are added! Thanks a lot guys

@L@TrO

Post 32M screenshot, please...

[amrgb]

bachus, I don't know if you will be happy or get mad , but I have another update to my result... DDR608 with all the settings the same except 3.0v and 23C of case temperature.

The weather here in Portugal may not be good for the beach as usually, but its sure great for overclocking

I'll post the screen later, because I have the felling that I may reach DDR610 in the next days.

EDIT: here's the pic



Settings: same as used on the DDR604 pic, but with 3.0v

Let's see if I can reach DDR610. Yesterday it bailed out at loop7. I have to loose the secondary timings a bit.

[Badong]

'bout that. In NF3/NF4 & TCCD - Highest stable clocks - REPORT IN !!!:

--------------------------------------------------------------------
4x512MB

TRCD=3

amrgb - 286x9=2574MHz DDR572 @ 8-3-3-2.5-1T - DFI Ultra-D S939 (NF4 Ultra) - A64 Winchester - Gskill PC4400LE

TRCD=4

Major - 285x10=2850MHz DDR570 @ 6-3-4-2.5-1T - DFI SLi-D S939 (NF4 SLi) - A64 San Diego - Gskill PC4400LE + Gskill PC4800LA

Four double-sided sticks at 1T? I don't think so... Besides, take a look at their A64 tweaker screenies

[amrgb]

Just for the record, since it was already posted in my thread (which will be short lived unlike this one)

2x512 DDR610 2.5-3-3-6 1T 3.0v Superpi32M stable (ambient temperature 24C)



cpuz validation page (yes, I'm back from the Middle Age ): http://valid.x86-secret.com/show_oc?id=25709

DFI memory timings (from top to bottom):
200-E-2.5-3-6-3-16-22-4-3-2-3-2336-1-E-A-0-7-2-9-F-6.5-256-E-16-7-D

I think that this is the end of this nice story... until 3.1v kicks in... but not until the winter temps come back (I don't want to be greedy and ruin my sweet sticks).

[Timothy730]

Here u go 300mhz ddr 600 (2.5-4-4-6) 2T.......
I think i can get it tighter.
<a href="http://img296.imageshack.us/my.php?image=300mhz5bx.png" target="_blank"><img src="http://img296.imageshack.us/img296/4439/300mhz5bx.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

[ex2cib]

i have a new one

i never tried it again with 2.5-3-3-7 after i changed to 618-3 bios, but i needed a little more than what 2.5-4-3-8 could give me (trying to break a 14k CPU score in aquamark3)

i found some old settings, i think i got them here somewhere

anyways, my new high score
9x295 2.5-3-3-7 @ 2.83v
OCZ platinum revision 2 v1.1 TCC5 chips

does anyone know what the fastest TCC5 32m stable is? just want to see how close i am at

edit: forgot to put CPU-z in the first one's, so i ran 32m again, and have it in the 2nd screenshot

[Eldonko]

@bachus_anonym

Heres an update, DDR626. Using 0618-1 and 4200EL TCC5. Cheers.

[ZX6R]

http://img243.imageshack.us/img243/9...erpi32m1ax.jpg

[ncsa]

315x8 = 2520Mhz DDR630 @ 7-3-4-2.5-1T - DFI SLi-DR S939 (NF4 SLi) - A64 Venice - GeIL ONE Series TCCD PC3200

BIOS 7/04-3

Cheers

[qk4723Deluxe]

GeIL TCCD DDR600 6-3-3-2.5 Super Pi 32M

[qk4723Deluxe]

Memtest86 3700+ 300x9= 2700Mhz DDR600 1T

DDR600 5-3-3-2.5 #5 1176 PASS 0 Erro


DDR622 6-3-3-2.5 #8 45 PASS 0 Erro


3000+ 328x9= 2953Mhz DDR656 1T

[ZX6R]

[qk4722]

3000+ GEIL TCCD DDR644 2.5-4-3-6 1T PI32M

[bachus_anonym]

***Updated**

@Timothy730

Tighten it up, man! Get off 2T Also, what PDP exactly is that? PDP Patriot XBLK PC3200?

@qk4723Deluxe and qk4722

Thanks a lot for dropping by, guys Nice to see some great clocks with GeiL UltraX :thumbsup:

@qk4722

What mainboard is that? DFI Ultra-D ?


This thread is getting bigger day after day! Thanks to you, guys! Keep'em coming, please

[qk4722]

***Updated**

@Timothy730

Tighten it up, man! Get off 2T Also, what PDP exactly is that? PDP Patriot XBLK PC3200?

@qk4723Deluxe and qk4722

Thanks a lot for dropping by, guys Nice to see some great clocks with GeiL UltraX :thumbsup:

@qk4722

What mainboard is that? DFI Ultra-D ?


This thread is getting bigger day after day! Thanks to you, guys! Keep'em coming, please

yes DFI Ultra-D thx !

[Timothy730]

yes it is Pdp xblk pc 3200
I cant get 1t quite stable but i had 2.5-4-3-7 stable before when i had a winchester.
I just got my venice recently so im still working out the quirks in the memcontroller.

I think i might be able to get 305mhz of of em

just gotta tweak!


Tim

[qk4723Deluxe]

Dear bachus_anonym
Please Update My Record ~
Thx

GeIL One SE Power~
306x8 = 2449.1Mhz DDR612 5-3-3-2.5 Most Tie Setting !

[ianocean]

Geil One S PC4800 2.5-3-3-7 1T 292Mhz

[Sucka]

Here's my G.Skill LE's.

[cupra]

2x512 gskill ff rams, i can do more mhz in my rams buy in lower multi like 9 or 10.

[Clevor]

This is PQI Turbo Dual Channel Kit, PC3200 at 2-2-2-5, 2x512 at 301x9, 2.5-3-3-7. Other specs:

Board: DFI Ultra-D
BIOS: 510-3
DIMM slots: Orange
VDIMM: 2.8 volts
VLDT/VCHIP: 1.2/1.5
LDT: 4x
CPU: CABGE 0517UPAW San Diego
VCORE: 1.456 volts

The sticks max out at 308 or so at 2.5-3-3-7 but I picked 301 to try SuperPI 32M .

[gundamit]

I just noticed I'm listed as having my TCCD run at 334 2.5-4-3. Thats not right. CPU-Z is not showing that I'm running a 9:10 divider so that really only 300. Please make the correction. I wish my sticks did that but while good performers they are not freaks.

[THunDA]

There is a Oc database at DFI street.. This is my recent entry so I figured to post it here also.. Its not a very high mem oc.. but I think its a good clock for 4x512mb's..



short description:
264x11 @ 2904Mhz, 1.325v + 126%
4x512mb's @ 2.5-4-8-3 @ 2.9v vdimm


Genie BIOS Settings:

FSB Bus Frequency - 264
LDT/FSB Frequency Ration - Auto
CPU/FSB Frequency Ratio - 11
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.55v

CPU VID Control - 1.325v
CPU VID Special Control - Avove VID * 126%
LDT Voltage Control - 1.20v
Chip Set Voltage Control - 1.60v
DRAM Voltage Control - 2.90v

DRAM Configuration Settings:

DRAM Frequency Set - 200 (DRAM/FSB:1/01)
Command Per Clock (CPC) - Disable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 09 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 01 Bus Clocks
Read to Write delay (Trwt) - 02 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled



DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 2
Max Async Latency - 8
DRAM Response Time - Fast
Read Preamble Time - 5.5
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(8 Bursts)



==========


Prime95 + 3dMark2001SE + 2x CPU-Z + MBM + A64Tweaker + RivaTuner vid clocks :




3dMark2003 + Everest + SuperPi 32m + MBM :




3dMark2005 :




Aquamark 3d:




==========

EDIT..
btw.. some of the images are cropped just because thats the way it needs to be in the database ..