MMM
Results 1 to 25 of 425

Thread: 7800GTX overclocks with Volt Mods??

Hybrid View

  1. #1
    Xtreme Member
    Join Date
    Jan 2004
    Posts
    387
    Quote Originally Posted by Malves
    These are the points that he asked.

    Pin 23 (V12_SEN) which is the left pin of the two pins indicated in red along the bottom side of the chip has a voltage divider

    If you follow straight down from P23 the SMR just below the automated test point pad goes to Vcore PS B+ out. The SMR marked 622 to the left goes to ground and forms the other 1/2 of the divider. I tried a Vmod at the 622 SMR already.

    I started 100k then turned down to 50K and the Vcore did not change even 1/1000 of a volt so that isn't da place. Someone can double check me on that if they want.

    The three Vdd input pins (12, 24 ans 36) look like are they are traced to each other under the chip from the ohm meter readings of zero ohms to each other.

    Viper
    Last edited by ViperJohn; 07-07-2005 at 09:15 AM.
    .
    8800 Ultra to 756x1944/1260 ViperFang-IV Water Cooled
    .
    2900XT to 992/1197 ViperFang-IV Water Cooled
    .
    8800GTX to 756x1784/1161 ViperVenom 245w TEC Cooled
    .
    7800GTX-512's to 742/2106
    .
    7800GTX-256's to 650/1620
    .
    Pictures at www.imageevent.com/marginjohn/viperjohn
    .
    Contact JohnHillig@Earthlink.net for Modding Information and Support.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •