Venice, Stepping and Oc Database

[dinos22]

the chip is worth more than retail CPUs if it can do the speeds you say it does at OCCT or equivalent.....if I was buying another one I would fork out more for a guaranteed performance....i paid AUD$30 more than retail cost in Australia to get my 3000+ Venice which does 2.8GHz but I have piece of mind now.....good luck with your sale

Well if new retail was $190 why wouldn't someone pay more then that for a chip thats already guaranteed to run at 2800Mhz? Its not likely for you to get one that can clock higher then that but it is a possibility that you'll get one that will top out at 2.6-2.7 or less. New or slightly used the chip will still perform the same :p.

[TheMeatFrog]

Going on a hunt today for some 0517 3000+'s at some local shops, wish me luck! If I can find a 3000+ 0517epaw you may see the chip in my sig for sale very soon. But I doubt it

[exscape]

Good luck TMF
DPMW chips seem to perform pretty good as well. I'm gonna see what mine can do at more voltage (>1.45v gets too hot atm) when I get my cooling tomorrow

[higherøx]

Any SS or pics ?

All that you want

OCCT


Prime95 Small FFTs


SuperPI 1Mb (one of the best results, it's ever between 31.0x and 31.5)


SuperPI 1Mb Patch SSE3


SiSoftware Sandra / Memory Bandwidth Benchmark


SuperPI 32Mb


Thanks

[fullup3]

yes, I would definately pay $200 for a 3200+ venice that was guaranteed to run @ 2.8 1:1.

But that's just me.

[TheMeatFrog]

No luck today on the 0517 hunt. Just found some 0520's

I would pay around 230 for a pre tested 3200+ chip simply because that's what you would pay at a retail store if you went in and handpicked it yourself. Most the major retail stores I went today 3000+ were 179.99 and 3200+ 229.99

[dng29]

200$ is reasonable for a 3200 that has the potential to run stable at 2800Mhz 1:1 ratio. i thought week 20th is pretty for ocing. i'm going to check a local mom/pop pc store here soon to see if they have week 15 or 17.

[CD 1986]

I posted my initial OC with my 3200+ 0517 GPBW a few pages back. It took about 1.55v to be Super-Pi 1M / 32M stable @ 270x10 (1:1 mem). I've just completed the 1st stage of my burn-in and now have the chip Super-Pi / Gaming-stable @ 1.48v (same clocks). It is Prime stable @ 1.50v

I'm going to do another 12 hours burning-in at the current voltage, then drop it a notch and try another 12 hours. I'm hoping to get it stable at a lower voltage and then get 2.8Ghz out of it.

P.S. anyone know how my Super-Pi 1M time (30.9 seconds) compares to others at similar clocks? Is it good, bad or average? Thanks.

[coop]

Quite good actually, esp. with those timings. nice chip and nice job.

[njkid32]

Hey guys I am new here and I thought I would put my OC in this here is a SS of CPU-z and I am going to run Super Pi in a minute and post them. Great site!

[Absolute_0]

pretty darn good for a week 16, njkid. Good job. How stable is it at that speed? Could you post your highest prime95 stable speeds? Thanks.

[njkid32]

thanx Absolute! I will run Prime overnight but I do know that it is stable for at least 12hrs. I was resolved some ram issues I was running OCZ Gold not the VX but it was BH-5 and I had to RMA them. I went to my local PC Club and picked up some OCZ Platinum 3200 rev.1 (model# in my sig) and come to find out that they were crap for oc'in. Well I decided to pull off the heatspreader just to see what chips they were and come to find out they were BH-5 or CH-5. So I then just put some more volts to them and pow they are right where my Golds were. So I am very happy for what I have right now! I did order some Mushkin XP4000 it should be here on Tuesday. Not a bad system for running on air (especially in arizona its 115 today)!!!!!

[higherøx]

I posted my initial OC with my 3200+ 0517 GPBW a few pages back. It took about 1.55v to be Super-Pi 1M / 32M stable @ 270x10 (1:1 mem). I've just completed the 1st stage of my burn-in and now have the chip Super-Pi / Gaming-stable @ 1.48v (same clocks). It is Prime stable @ 1.50v

I'm going to do another 12 hours burning-in at the current voltage, then drop it a notch and try another 12 hours. I'm hoping to get it stable at a lower voltage and then get 2.8Ghz out of it.

P.S. anyone know how my Super-Pi 1M time (30.9 seconds) compares to others at similar clocks? Is it good, bad or average? Thanks.

Pretty nice result.
It's incredible, but 270 2.5 3-3-7 is a bit faster than 300 2.5 4-3-6.

[4rory]

njkid32 remeber me from ocz forums? the dude who told you to try more volts on ur rams? nice to see them running that fast.

[Riverna]

3000+ LBBLE 0520APBW - 2855 MHZ 1.568V H2O - Prime Stable

[Cordovader]

3200+ LBBLE 0518APAW 2700Mhz 1,695v XP90+Tornado

Can´t go higher

[njkid32]

Oh yeah I remember you 4rory thanx for the sug they are running much better now @270MHz I raised the divider to 166.

[kapster]

just wanted to drop in again and report on my week 19 EPKW I got thursday from newegg. I am stable at 2.75 (1.6v) with it so far under water. (probably best it will do)

I am finding it rather sad though that my ocz plat rev2 cant do even 270fsb 2.5-3-3-7

right now at 275 w/ 2.5-4-4-7

maybe i can get 2.5-3-3-3 working though i need to read up some more on tweaking memory.

[187(V)URD@]

3000+:
3000+ CBBLE 0504DPAW - 2800 MHZ 1.616V AIR - Gorod XS
3000+ CBBLE 0504DPAW - 3000 MHZ 1.648V PC - Gorod XS
3000+ CBBLE 0512DPAW - 2700 MHZ 1.360V AIR - =STE=BloodAngel XS
3000+ CBBLE 0512DPAW - 2800 MHZ 1.520V AIR - =STE=BloodAngel XS
3000+ CBBLE 0512DPAW - 2857 MHZ 1.632V AIR - DesertShooter XS - Zalman 7700CU , stable ?
3000+ CBBLE 0512DPAW - 2880 MHZ 1.520V AIR - vrtn XS - XP120 + FAN , SuperPI 16M Stable
3000+ CBBLE 0512DPAW - 2902 MHZ 1.500V AIR - SmokeyTheBandit XS
3000+ CBBLE 0512DPBW - 2900 MHZ 1.500V H2O - 187(V)URD@ - Prime stable
3000+ CBBLE 0512DPBW - 2826 MHZ 1.500V H2O - xpr-k XS
3000+ CBBLE 0512DPBW - 2901 MHZ 1.680V H2O - mongoled XS
3000+ CBBLE 0512DPBW - 2916 MHZ 1.664V H2O - Jimbo Mahoney XS
3000+ CBBLE 0512DPBW - 2922 MHZ 1.580V AIR - Torman XS - stock cooler
3000+ LBBLE 0512FPDW - 2700 MHZ 1.480V ??? - SillySider03 - prime stable
3000+ LBBLE 0515FPDW - 2845 MHZ 1.530V AIR - sinsinking XS - Hyper6
3000+ LBBLE 0515FPMW - 2808 MHZ 1.600V AIR - askimo XS
3000+ LBBLE 0516CPBW - 2450 MHZ 1.520V AIR - Geforce4ti4200 XS - 2500 NOT STABLE
3000+ LBBLE 0516CPBW - 2475 MHZ 1.472V AIR - JDizzle Ocforums
3000+ LBBLE 0516CPBW - 2600 MHZ 1.632V H20 - bmaffin13 XS - 12+ Hours prime stable
3000+ LBBLE 0516CPBW - 2610 MHZ 1.488V AIR - shiznit93 XS
3000+ LBBLE 0516CPBW - 2610 MHZ 1.568V AIR - patrck17 Ocforums
3000+ LBBLE 0516CPBW - 2630 MHZ 1.536V AIR - Skratch XS - stock cooler
3000+ LBBLE 0516CPBW - 2700 MHZ 1.400V H2O - Craptacualr Ocforums
3000+ LBBLE 0516CPBW - 2700 MHZ 1.488V AIR - stang8118 Ocforums
3000+ LBBLE 0516CPBW - 2700 MHZ 1.552V H2O - ociadotnet XS
3000+ LBBLE 0516CPBW - 2700 MHZ 1.664V AIR - HousERaT XS
3000+ LBBLE 0516CPBW - 2700 MHZ 1.750V AIR - clockedOut XS - NOT STABLE
3000+ LBBLE 0516CPBW - 2765 MHZ 1.648V AIR - TheMeatFrog XS
3000+ LBBLE 0516CPBW - 2765 MHZ 1.744V AIR - trans am XS
3000+ LBBLE 0516CPBW - 2808 MHZ 1.664V AIR - stang8118 Ocforums
3000+ LBBLE 0516CPCW - 2600 MHZ 1.550V AIR - Vroom - from Trend4PC.de XS
3000+ LBBLE 0516CPCW - 2610 MHZ 1.650V AIR - KamE38 XS - stock cooler stable
3000+ LBBLE 0516DPJW - 2800 MHZ 1.568V AIR - UCmajewski XS - stock cooler
3000+ LBBLE 0516DPMW - 2627 MHZ 1.536V ???? - zwierzak24dg TWEAK.PL
3000+ LBBLE 0516DPMW - 2712 MHZ 1.536V H2O - zwierzak24dg TWEAK.PL
3000+ LBBLE 0516DPMW - 2745 MHZ 1.550V AIR - VerB TWEAK.PL
3000+ LBBLE 0516DPMW - 2844 MHZ 1.648V H2O - Mardok TWEAK.PL
3000+ LBBLE 0516EPAW - 2700 MHZ 1.552V AIR - SDX XS - XP120 + FAN , prime stable
3000+ LBBLE 0516EPBW - 2160 MHZ 1.400V AIR - PURE TWEAK.PL - EXTREME BAD
3000+ LBBLE 0516EPBW - 2806 MHZ 1.600V H2O - Yotomeczek TEAK.PL
3000+ LBBLE 0516EPBW - 2860 MHZ 1.730V H2O - Yotomeczek TEAK.PL
3000+ LBBLE 0516EPHW - 2700 MHZ 1.536V AIR - MassiveOverkill amdforums
3000+ LBBLE 0516EPKW - 2700 MHZ 1.696V AIR - Cornelious0_0 XS
3000+ LBBLE 0516GPAW - 2754 MHZ 1.504V ??? - Trevor XS - prime stable
3000+ LBBLE 0516GPBW - 2808 MHZ 1.552V H2O - arj XS
3000+ LBBLE 0517APJW - 2,961 MHZ 1.600v AIR - Cornelious0_0
3000+ LBBLE 0517APIW - 2700 MHZ 1.360V AIR - peter lu XS
3000+ LBBLE 0517APIW - 2800 MHZ 1.440V AIR - peter lu XS
3000+ LBBLE 0517DPMW - 2,700 MHZ 1.392v AIR - exscape
3000+ LBBLE 0517EPAW - 2700 MHZ 1.475V AIR - SoboL XS - FreeZone QC-80 CU - http://www.esc.pl/index.php - prime stable
3000+ LBBLE 0517EPAW - 2781 MHZ 1.480V AIR - Pure tweak.pl - stock cooler , prime stable
3000+ LBBLE 0517EPAW - 2925 MHZ 1.522V AIR - Vosh tweak.pl - 12 h prime stable , Freezer64 + AS5 , BEST CPU IVE SEEN
3000+ LBBLE 0517EPAW - 2942 MHZ 1.580V H2O - wampir XS - SuperPI 16 M stable
3000+ LBBLE 0517EPAW - 2961 MHZ 1.616V AIR - Vosh tweak.pl - 12 h prime stable , Freezer64 + AS5 , BEST CPU IVE SEEN
3000+ LBBLE 0517EPMW - 2700 MHZ 1.376V AIR - qk4722 XS - prime stable

3000+ LBBLE 0519BPEW - 2700MHZ 1.38V - AIR - Deus Falsus - T.T BIG TYPHOON
3000+ LBBLE 0519CPJW - 2600MHZ - 1.57V - AIR- Deus Falsus - T.T BIG TYPHOON

3000+ LBBLE 0520APBW - 2855 MHZ 1.568V H2O - Riverna - Prime Stable

3200+:
3200+ CBBLE 0504EPAW - 2800 MHZ 1.520V AIR - Kane XS
3200+ LBBLE 0515APAW - 2700 MHZ 1.360V ??? - jinu117 XS - prime stable
3200+ LBBLE 0515APAW - 2800 MHZ 1.400V AIR - Burnt_Ram XS - SuperPI 32M , XP-90 + FAN
3200+ LBBLE 0515APAW - 2800 MHZ 1.408V AIR - D3kMatrix XS/OCforums - prime stable 8 h
3200+ LBBLE 0515APAW - 2850 MHZ 1.450V AIR - 4rory XS
3200+ LBBLE 0515APAW - 2850 MHZ 1.520V AIR - D3kMatrix XS/OCforums - prime stable 24 h
3200+ LBBLE 0515APAW - 2900 MHZ 1.408V H2O - musk XS
3200+ LBBLE 0515APAW - 2906 MHZ 1.550V AIR - s7e9h3n XS , SuperPI 32M stable
3200+ LBBLE 0515APAW - 2950 MHZ 1.500V H2O - JfRsQ XS - stable ??? , Bought from NCIX Computers, Canada
3200+ LBBLE 0515EPGW - 2800 MHZ 1.504V ??? - daddy_fizz XS - prime stable 2h
3200+ LBBLE 0515FPBW - 2700 MHZ 1.408V AIR - Techwarrior XS - 24 h prime stable , XP-90 + FAN
3200+ LBBLE 0515FPBW - 27500 MHZ 1.450V ??? - oasked XS
3200+ LBBLE 0515FPBW - 2800 MHZ 1.552V AIR - Techwarrior XS - 24 h prime stable , XP-90 + FAN
3200+ LBBLE 0515GPBW - 2700 MHZ 1.328V ??? - leotonch XS - prime stable
3200+ LBBLE 0515GPBW - 2700 MHZ 1.450V AIR - bonzer XS
3200+ LBBLE 0515GPBW - 2800 MHZ 1.392V H2O - H2OGun XS
3200+ LBBLE 0515GPBW - 2929 MHZ 1.664V AIR - PcCI2iminal XS
3200+ LBBLE 0515GPBW - 3000 MHZ 1.600V H2O - H2OGun XS
3200+ LBBLE 0516?????? - 2800 MHZ 1.680V H2O - Badge56 XS
3200+ LBBLE 0516EPEW - 2650 MHZ 1.584V AIR - dnottis XS
3200+ LBBLE 0516EPEW - 2700 MHZ 1.700V AIR - Deus Falsus XS
3200+ LBBLE 0516EPEW - 2800 MHZ 1.616V AIR - vapb400 XS
3200+ LBBLE 0516EPGW - 2500 MHZ 1.550V AIR - Dermen Ocforums
3200+ LBBLE 0516EPGW - 2670 MHZ 1.700V AIR - Deus Falsus amdforums
3200+ LBBLE 0516EPGW - 2670 MHZ 1.700V AIR - Deus Falsus XS
3200+ LBBLE 0516EPGW - 2700 MHZ 1.456V AIR - Ziku TWEAK.PL
3200+ LBBLE 0516EPGW - 2700 MHZ 1.504V AIR - 4X4N XS
3200+ LBBLE 0516EPGW - 2700 MHZ 1.568V H2O - aMp XS
3200+ LBBLE 0516EPGW - 2763 MHZ 1.664V AIR - politenessman XS
3200+ LBBLE 0516EPGW - 2800 MHZ 1.696V AIR - Wayway XS
3200+ LBBLE 0516EPGW - 2808 MHZ 1.580V AIR - Rubescen XS
3200+ LBBLE 0516EPGW - 2840 MHZ 1.660V ??? - TheMeatFrog XS
3200+ LBBLE 0517APHW - 2850 MHZ 1.520V AIR - PITer TWEAK.PL
3200+ LBBLE 0517BPDW - 3201 MHZ 1.608V DICE - Dj_Rudy XS - stable ??
3200+ LBBLE 0517BPEW - 2800 MHZ 1.560V AIR - KamE38 XS - stock cooler stable
3200+ LBBLE 0517BPEW - 2845 MHZ 1.376V H2O - Fintas-XP XS
3200+ LBBLE 0518APDW - 2853 MHZ 1.696V H2O - htkm1 XS
3200+ XXXX 0519CPIW - 2700 MHZ 1.48V AIR - xchus - XP-90

3500+:
3500+ CBBLE 0504EPAW - 3003 MHZ 1.480V PC - TodB XS
3500+ CBBLE 0512DPAW - 2750 MHZ 1.660V AIR - mcbarnet007 XS
3500+ CBBLE 0512DPAW - 2840 MHZ 1.456V PC - Onepagebook XS
3500+ CBBLE 0515?????? - 2705 MHZ 1.552V AIR - Rickster_64 XS
3500+ LBBLE 0515FPAW - 2750 MHZ 1.440V AIR - Tibu XS
3500+ LBBLE 0515FPAW - 2850 MHZ 1.648V AIR - Joe Camel XS
3500+ LBBLE 0515FPAW - 2900 MHZ 1.648V AIR - Tibu XS
3500+ LBBLE 0515FPBW - 2972 MHZ 1.648V AIR - charlie XS - Hyper6 , bought from monarch
3500+ LBBLE 0516CPAW - 2754 MHZ 1.616V AIR - Dani XS - stock cooler
3500+ LBBLE 0516DPMW - 2700 MHz 1.550V H2O - Sillen XS

3800+:
3800+ CBBLE 0504EPMW - 3306 MHZ 1.664V PC - s7e9h3n , Mach2
3800+ CBBLE 0507DPAW - 2906 MHZ 1.360V PC - Cranox XS
3800+ CBBLE 0513CPBW - 2750 MHZ 1.500V AIR - Seriola XS - stock cooler - prime stable 5h
3800+ CBBLE 0513CPDW - 2700 MHZ 1.360V PC - spiritedandy Ocforums
3800+ CBBLE 0513CPDW - 2929 MHZ 1.650V H2O - xxmartin XS
3800+ CBBLE 0513CPDW - 2950 MHZ 1.664V ??? - kamui XS
3800+ LBBLE 0515GPAW - 2856 MHZ 1.488V H2O - Jaco XS - 14h prime stable
3800+ LBBLE 0516CPCW - 2751 MHZ 1.460V H2O - Computersmsa Bel-Hardware.be

[Cornelious0_0]

I was going to ask what the point of that last post was...but then I saw that they were arranged chronilogically by CPU name/stepping.

You can add me to the list for now....PSU is dead, so i still don't have a Prime stable OC for ya...but my newer Venice did quite well. Still no burn-in.

3000+ LBBLE 0517APJW - 2,961 MHZ 1.600v AIR

CPU-Z Validation

Best 1M time so far...still no tweaks to the Alpha timings (all on auto) and run in a dirty OS.....gonna get my alpha timings finalised and get running in my bench partition again to see if I can at least crack 28.5s before I get some more cooling going on this thing:

[exscape]

Mine:
3000+ LBBLE 0517DPMW - 2,700 MHZ 1.392v AIR

Gonna get it up higher tomorrow though, getting some cooling that should be able to cope with higher vcore.

[blackjok3r]

nice... Just when I thught no body wa going to beat my 1M on air, you come out with those clocks, and your just off it with no tweaks. I go to get back to it. Nice clocks btw, thats an incredible CPU.

[Deus Falsus]

0519BPEW 2.7GHZ @ 1.68 vcore.
0519CPJW 2.6GHZ @ 1.57 vcore.

[JediMaster]

nice... Just when I thught no body wa going to beat my 1M on air, you come out with those clocks, and your just off it with no tweaks. I go to get back to it. Nice clocks btw, thats an incredible CPU.

No one broken 28s on air w/ 3000+ ? I posted this here on 6/22/05 - 3000+ doing 28.594s @ 3G and loose RAM timings:

<a href="http://img279.echo.cx/my.php?image=x9h334t3438p20bx.png" target="_blank"><img src="http://img279.echo.cx/img279/7471/x9h334t3438p20bx.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

[njkid32]

Here is my stable Prime95 for 10hrs and 47min.