Memtest WR DDR1220

[Charles Wirth]

Developer 955x Mobo
Mushkin DDR2 Speed rating unknown
3:5 ratio 2.3v (DDR800 stock voltage) 1.6v on core.
Windows BSOD really early (low FSB)

memtest seems to be fine but the bandwidth is sub par. I have two more boards to test. I plan on taking best combo to tripple stage and run some 3D.

[EnJoY]

Wow Charles, that is truly ridiculous speeds man! I can't believe you retained *-2-2-* at those speeds, truly sick!

[Charles Wirth]

Just found out from Mushkin, these are PC2-6400 5-3-3-8 (default)

I also forgot to mention, I have an 8K BTU ac unit blasting onto the mobo.

[eva2000]

yikes....

[NeGe0]

Now that is insane

[EMC2]

Really nice DDR2 speeds And I like your cooling From my experience looping T8 is best indicator for possible windows stability...

Peace

[mion]

nice stuff

[jkabaseball]

sounds like you are using the 1:2 divider, yea it doesn't work.

[Charles Wirth]

My 1:2 divider doesnt work and will give me 4:3 ratio

[jkabaseball]

you're right, I had to bust out a calculator to figure that one out. nice work

[xs64]

Developer 955x Mobo
Mushkin DDR2 Speed rating unknown
3:5 ratio 2.3v (DDR800 stock voltage) 1.6v on core.
Windows BSOD really early (low FSB)

memtest seems to be fine but the bandwidth is sub par. I have two more boards to test. I plan on taking best combo to tripple stage and run some 3D.

FUGGER , can you show the picture of cooling for Ram
BTW , nice Ram oc here

[freecableguy]

Who's MB? Please tell me its DFI.

[cupra]

Who's MB? Please tell me its DFI.

i bet its the asus board


that is very high mhz fugger, we wait for your 3d ...

well done

[[XC] moddolicous]

Cant wait for 3d. Would spi be good @ those speeds?? I dont think 5cas will help, but with 6xx fsb. Hopefully Fugger will get into the 19's with that setup.

[Charles Wirth]

I setup the AW8 last night and about the same results as the first one. WIth a known good chip to reach ~ 375FSB it would not break 300FSB with stability. Anyone else out there with a AW8 over 300FSB? There is some adjustments in bios to raise the voltages and I tried everything. The voltages bump around quite a bit very quickly. If I am at 1.45vcore it will bounce between 1.44v and 1.46v about 30 times per second. With forward ratios I was able to reach DDR900

P5ND2 next.

[althes]

Well that takes the aw8 of my list

[5-Clicks]

truely xtreme man. truely.

[ozzimark]

I also forgot to mention, I have an 8K BTU ac unit blasting onto the mobo.

nice work, though.. i have to admit the title is a bit misleading, i thought it was 610mhz on ddr, not ddr2.. i almost crapped my pants

[Sentential]

Damn thats nice! Wish I had pplz like them sending me stuff

[Sentential]

Fugger are you sure your motherboard is applying the proper divider? Your bandwith is awefully low. It should be atleast and over 4500MB/s

[ahmad]

For a second there I thought you meant DDR not DDR2...

Still damn impressive especially at those timings.

[BadlyDrawnBoy]

Wow, nice speeds.

[Spanners]

Great speeds
how many passes did you run?

[n00b 0f l337]

Was this only possible with the a/c? How high could you get without it?

[Charles Wirth]

Noob, 950Mhz without ac on.

Spanners, too many if you count failed tests.
I wait for error on first pass, I have higher speeds shots with errors in tests.