Modding Request for Neo2 - mem timings!

[nfm]

MSI K8N Neo2 Modded bios
Version : 18 R2

18-R2 Change Log from original 18
- Overclockers Bios Layout
- New Boot Up Logo
- Dram Drive Strength : Normal / Weak
- Preset Trc & Trfc Patch (TRC = 13 & TRFC = 15)

* To enable trc & trfc patch you need to Enable Onboard GigaLan Device from bios menu.
* if problem occur Disabled Onboard GigaLan Device to disable trc&trfc patch

Download Link: (limited bandwith)
http://www.geocities.com/nastechxtr...N-Neo2-18R2.zip

tictac

Yes, this is the best BIOS I ever used yet. Sorry to bug you, you seem as a very busy man
This what I would like to see and probably many others in 18 Rev.3

Add these memory optimizations on all dividers so they always will be set at those valuses:

- Read Write Queue Bypass = 16x
- Bypass Max = 7x
- Idle Cycle Limit = 256 clks
- Up TRFC to 18 clks on all dividers

^^^^^^^^^ These do not harm performance at all, while they
boost stability big time. They also increase overall memory overclock. I testet it.


Some cosmetic touch ups :

- Fix voltage control tab if possible so on right of "voltage control" option it will say [Press Enter]

again, ya da man tictac