Go to the Asus website to get drivers, bios, utilities.
Just look at the menu across the top - ASUS
The link is very slow and may not take you exactly where I was sending you - Asus is busyYou may have to find your way
![]()
Go to the Asus website to get drivers, bios, utilities.
Just look at the menu across the top - ASUS
The link is very slow and may not take you exactly where I was sending you - Asus is busyYou may have to find your way
![]()
No multis in bios with p4p800se. Also Vcore is 1.6 max in bios.Originally Posted by Mathias-K
Official ORB bottom feeder.
I have 2x thermochill 120.2 and a mcp650 pump.
the 6800gt has a nv68 on it so it runs a lot cooler too.
the system would be quiet if it was not for the high pitch wine of the mcp650
but the way my rads are built into the base of the case i plan to noise insulate around them with he pump in the middle.
rads in case
I have a feeling that it wont go much higher from what i am seeing here once thay hit that wall thats it but it will be fun to try.
Originally Posted by uclajd
By "never" you mean in its 478 incarnation?Originally Posted by luseruser
I don't see why they couldn't at some point, since all of these P4Ps seem to be able to digest any P4P bios...
<----- REST IN PEACE, KIT. 1993-2007.
w/ my 725 and P4P800D (1007.003 bios) i hit a wall at 159.9 FSB Pi MOD 1.4 stable.
160.5=no go. :/
Ciao
Easiest way to obtain working software for your P4C800-E board is to grab them here in the download section.Originally Posted by mrnuke
Never Argue With An Idiot. They'll Lower You To Their Level And Then Beat You With Experience!
So you can boot at 201 now? Thought you couldnt boot past 155?Originally Posted by Ychocky
Yeah, anything between 153 and 176 does not boot.Originally Posted by JamesAvery22
201 seems to be working fine.
2.4 is no problem with multiplier at 10 or 12.
Haven't tried to go any further than 240 in clockgen. I'm scared
![]()
2 Questions
Are there any programs that allow you to change voltage from windows
Are there any places that sell headsinks for the dothan that i dont have to zip tie to the mounting clip or any hassel like that
Intel QuadCore Q6600
P5N32-E SLI PLUS
2 gig DDR2 1066 PC8500
Evga 8800gts
SilverStone 800w
WD 250 gig SATA HD
WD 3x500 gig SATA HD Raid5
WD 150gig Raptor
TT XaserIII
Read the frontpage!Originally Posted by pcboarder
Not that I know of.Originally Posted by pcboarder
Read the front page for tips on easiest non-stock aircooling.
Here's a couple recent dothan testing from me.
P4c800e flashed to p4p800
M 730 533fsb
DDR booster
OCZ 600w
XP Pro
No 3dmark tweaks or windows tweaks. Going to get some more runs in soon, w/ a better tweaked windows install and etc hopefully.
I like building Vapor phase coolers......
......to cool mynipples!!
Heat is "gclg2000"
95-0-0
-100C Cascade Club
gclg,
What cooling are you running to get the 3ghz clock? Is that a 24x7 stable clock or just benching speed?
where does your 730 come from: philippines or malaysia? Did you managed to boot directly at >190fsb?Originally Posted by gclg2000
just bought a p-m kit, it should arrive here in about 2 weeks. can't wait to start "playing"![]()
Inspiron6000 @ 2.4Ghz
I am going to put myu 27 sec up soon
Intel QuadCore Q6600
P5N32-E SLI PLUS
2 gig DDR2 1066 PC8500
Evga 8800gts
SilverStone 800w
WD 250 gig SATA HD
WD 3x500 gig SATA HD Raid5
WD 150gig Raptor
TT XaserIII
How many volts to the memory?Originally Posted by pcboarder
![]()
I've done some testing recently.. and i would say that the results are not too shabby.. Using a PM 750, on a P4C800-E dlx fully modded, with the simple U-wire mod, Eist to increase multiplier, clockgen to increase fsb. Using the 1022.003 bios.. And of course... an OVERKLOKK modded Mach II with Chilly1 Evap...
![]()
![]()
![]()
![]()
After trying to figure out what to insulate with, and how to get it 100%, we just said f**k it, and used vaseline... works like a charm... The hooks are some ceiling hooks, slightly modded, works perfect..
My plan was to post some 3d mark 01 results.. butr unfortunatly i just killed my x800xt pe last night, so i guess that will have to wail till tomorrow, when my new x800xt pe arrives... Managed 36k last night with stock speed on the video card.. but unfortunatly no pics
Last edited by Eel; 06-15-2005 at 03:58 PM.
3.7Originally Posted by Ychocky
Intel QuadCore Q6600
P5N32-E SLI PLUS
2 gig DDR2 1066 PC8500
Evga 8800gts
SilverStone 800w
WD 250 gig SATA HD
WD 3x500 gig SATA HD Raid5
WD 150gig Raptor
TT XaserIII
did yours do 27secs at this?Originally Posted by pcboarder
http://img.photobucket.com/albums/v7...orums/pm26.jpg
i cant find the modde superpi so if someone has the link ill re run the test at 2.6ghz.
*edit* the screeny is a shot of my rig
Last edited by Evilsizer; 06-16-2005 at 03:08 AM.
Intel Pentium G3258 | ASRock Z97M OC Formula | Samsung 2x4GB DDR3-1600 | Galaxy GTX660 GC | Samsung PM840 Pro 128GB, PM830 250GB FDE |
"I Love To Camp!"
"Comensing Shock Therapy!"
HeatWare
I've had this conversation before, but it wasn't about computers.Originally Posted by Eel
![]()
<----- REST IN PEACE, KIT. 1993-2007.
Good to hear... means I'm not alone...I've had this conversation before, but it wasn't about computers.![]()
Updated the frontpage with all new results. Please let me know if I forgot any
Lets show how well our Dothans do in the Extreme Grand Prix!
Go go go
well here is a screeny of my 730 @2.7 with 6800u @425/1.2
http://img.photobucket.com/albums/v7...s/pm2701se.jpg
3dmark01se link:
http://service.futuremark.com/compare?2k1=8613113
Intel Pentium G3258 | ASRock Z97M OC Formula | Samsung 2x4GB DDR3-1600 | Galaxy GTX660 GC | Samsung PM840 Pro 128GB, PM830 250GB FDE |
"I Love To Camp!"
"Comensing Shock Therapy!"
HeatWare
I am having some AGP lock issues on the P4P800SE with my X800 XTPE, despite booting at 200. Anyone know a workaround?
I'm ready to murder.![]()
Last edited by uclajd; 06-16-2005 at 03:40 AM.
<----- REST IN PEACE, KIT. 1993-2007.
Bookmarks