FX55 San Diego 0513MPMW OC tests

[Melkizedek]

I'm testing another 0513mpmw... just a little of Ln2... the cold bug is here too... -50°C



the system is old, fully unoptimized and even fragmented so the time is quite hight...


I'll format later.... really want to try some 3d bench at 3600+ mhz

[Dumo]

I'm testing another 0513mpmw... just a little of Ln2... the cold bug is here too... -50°C

That 3.6G answer one of my question Please explain the -50C part.
B/way thats a nice clock

[Melkizedek]

I'm using a pt100 probe placed in the back of the socket to get the temp.

at -60 the system can boot but is really unstable... lower temp no boot at all

at -52 can boot and bench @ 3696mhz... really there is no way to get 3700 mhz at 1,7 volts.

higher voltage seem to be more unstable... the system can't even boot at 1.9volts my bad

[Dumo]

I'm using a pt100 probe placed in the back of the socket to get the temp.

at -60 the system can boot but is really unstable... lower temp no boot at all

at -52 can boot and bench @ 3696mhz... really there is no way to get 3700 mhz at 1,7 volts.

higher voltage seem to be more unstable... the system can't even boot at 1.9volts my bad

Thanks for the info. Seems like 1.7 is the spot for this cpu so far.

[EMC2]

Quite nice clocks Melkizedek

at -60 the system can boot but is really unstable...

Have you tried raising the multi by 1 and dropping the FSB perchance? If not, would you mind trying (keeping the CPU core at same clocks as before) if you get the chance please

Peace