The OCZ guys have been suggesting this as a basic troubleshooting measure for some time now. If it doesn't work one way, try swapping the modules in the slot locations. More often than not this will solve a lot of your problems.
-Eric
The OCZ guys have been suggesting this as a basic troubleshooting measure for some time now. If it doesn't work one way, try swapping the modules in the slot locations. More often than not this will solve a lot of your problems.
-Eric
An OCZ guy made a thread about this a while ago:
http://www.xtremesystems.org/forums/...409&highlight=
My mushkin redline can do 270 @2-2-2-6 rock solid, but out of curiosity I put the slower stick on dimm 2 (further away from cpu) and put the faster stick next to the cpu....it completely wreck havok the memtest, got thousands of error.switching them back eliminated the error and gain back the solid memclock I had.
If I were to run 4x512MB I definitely would put the slowest one next to cpu and the fastest on the last slot
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
Posting Permissions
Reply With Quote
Bookmarks