WoWOriginally Posted by Onepagebook
I also got a 0442 king sitting here.
and
this thing is on the way back to me.
It looks like King Cobra in the box
Cant wait for the run with BN...
WoWI also got a 0442 king sitting here.
and
this thing is on the way back to me.
Finally, seems like this cpu have the power like 130nm 0435 and 0442
OPB, It needs more cooling like yours...
It's ALL up to you, Kevin... if it works @ -100C, FX57 rules the day benching at 3.8-4.0ghz.I also got a 0442 king sitting here.
and
this thing is on the way back to me.
If it doesn't work, just remember that Dothan LOVES cold temps and runs well on G.Skill GBGH sticks...
C
Real nice.
Is it N or T?
Bringin' it home!
It is a T..
I will try asking againWhat speed can you bench that bad boy on Dumo??? Is it wearth getting the BN instead of a 3370mhz benchstable 130nm ???
The whole world's hip and thats not cool !
Rip Van Hippy
Doesn't expecting the unexpected make the unexpected the expected ?
Light travels faster than sound. This is why some people appear bright until you hear them speak
-------------------------
So far is 3.49G and 1.6-1.65 Volt with Vapo LS...needs more cooling power to reach more Mhz.I will try asking again
Sioux, its hard to decide if its worth it or not b/cause both are good overclocker..... I stll keep my 130nm one. My goal is to test both under cascade and decide which one to keep
Last edited by Dumo; 06-14-2005 at 02:41 PM.
Thought so,even though that side of your pic was to dark.
Very nice chip & thanks for the reply.
Bringin' it home!
So far is 3.49G and 1.6-1.65 Volt with Vapo LS...needs more cooling power to reach more Mhz.
Sioux, its hard to decide if its worth it or not b/cause both are good overclocker..... I stll keep my 130nm one. My goal is to test both under cascade and decide which one to keep
Ok...thank you
The whole world's hip and thats not cool !
Rip Van Hippy
Doesn't expecting the unexpected make the unexpected the expected ?
Light travels faster than sound. This is why some people appear bright until you hear them speak
-------------------------
Is that really matter?Please let us know, Thank you very much.
Charlie, I have never owned any intel before since I got K5...
![Send a message via AIM to [XC] moddolicous](images/misc/im_aim.gif)
Thats gonna have to change soon OPB. Dothan looks to be on par with FX-55. If the FX-57 has no cold-bug, then we will see the sparks fly.Is that really matter?Please let us know, Thank you very much.
Charlie, I have never owned any intel before since I got K5...
Uh oh... OPB getting his King Cobra back... and Dumo is tweaking his 3 FXs.
/me throws out the drool covered popcorn and gets some chips for the show
Big boys came out to battle thats for sure
Team Rufio
Just stayIs that really matter?Please let us know, Thank you very much.
Charlie, I have never owned any intel before since I got K5...
I'm testing another 0513mpmw... just a little of Ln2... the cold bug is here too... -50°C
the system is old, fully unoptimized and even fragmentedso the time is quite hight...
I'll format later.... really want to try some 3d bench at 3600+ mhz
a basic law of OC world: DONT TELL MACCI HOW TO BENCH (by Hallowed)
That 3.6G answer one of my questionI'm testing another 0513mpmw... just a little of Ln2... the cold bug is here too... -50°C
B/way thats a nice clock
I'm using a pt100 probe placed in the back of the socket to get the temp.
at -60 the system can boot but is really unstable... lower temp no boot at all
at -52 can boot and bench @ 3696mhz... really there is no way to get 3700 mhz at 1,7 volts.
higher voltage seem to be more unstable... the system can't even boot at 1.9volts my bad
a basic law of OC world: DONT TELL MACCI HOW TO BENCH (by Hallowed)
Thanks for the info. Seems like 1.7 is the spot for this cpu so far.I'm using a pt100 probe placed in the back of the socket to get the temp.
at -60 the system can boot but is really unstable... lower temp no boot at all
at -52 can boot and bench @ 3696mhz... really there is no way to get 3700 mhz at 1,7 volts.
higher voltage seem to be more unstable... the system can't even boot at 1.9volts my bad
Quite nice clocks Melkizedek
Have you tried raising the multi by 1 and dropping the FSB perchance? If not, would you mind trying (keeping the CPU core at same clocks as before) if you get the chance please
Peace
bummer, then 0442 will be called for duty.
Yes, call it back from short retirementbummer, then 0442 will be called for duty.
B/way.... maxed so far...with single phase...
Last edited by Dumo; 06-18-2005 at 11:00 PM.
dame that cold bug.........is buging every big player NOW............
OPB i hop that your 4600 don't have cold bugs.............
Usually known cold bug appears at everythin' subzero but the Sandy core runs fine at -50° - -90°C (mostly).
So in my opinion this is no real cold bug. Should be no problem using single phase.
Only LN/DI/cascade users should be warned about the frost bug - but who knows, if it is really caused by the mem controller maybe AMD releases a second edition with a better one or the next FX generation (FX-59) will have no frost bug anymore.
AFAIK the problem is known by AMD but in my opinion it's not that important to them than to us !!!
Previous system:
----------------><------------------
Right now on water, my 0513MPMW is pushing 3060MHz (255*12 1.56v reads 1.52 in CPU-Z). This is Super PI 32m, S&M, and Memtest stable. So far I am happy with this chip. Maybe after my next project, I'll upgrade to a PC*ICE setup and push it further...
That's why I asked the Q of Melkizedek... if it is the mem controller, I have an
-----
Very nice CPU freq on water there Snake
Peace
Posting Permissions
Reply With Quote
Bookmarks