just look at the die size of that dual core itanium chip... wow... just wow...
the pressler chip looks pretty much as large as a prescott core... interesting...
its made in 65nm so they def have added a lot of logic to it!
just look at the die size of that dual core itanium chip... wow... just wow...
the pressler chip looks pretty much as large as a prescott core... interesting...
its made in 65nm so they def have added a lot of logic to it!
Montecito(Itanium) has 2x12 MB L3 cache and 1.72 billion transistors. Die size~580 sq.mm. Bus speed 533/667 MHz.
Last edited by Cooper; 06-10-2005 at 11:33 AM.
wow :O
Gaming: SaberThooth X79,3930k,Asus6970DCII_Xfire,32gb,120OCZV3MaxIOPS, ThermaTake Chaser MK1
HTPC:AMD630,ATI5750,4gb,3TB,ThermalTake DH103
Server: E4500,4GB,5TB
Netbook: Dell Vostro 1440
holy bugger...1.72 billion.......*counts with fingers*
I wonder what kind of cooling that huge Montecito die would need![]()
Last edited by QuikSilver; 06-11-2005 at 05:37 AM.
its not aircooled afaik, some custom liquid cooling i suppose
but im not sure i held one of those itanium 2s in my own hands at cebit!
and it had a heatsink on it... damn that whole cartridge was heavy!
That Yonah and Smitfield are both dual cores, as well as the Presler Dempsey. But the Yonah and Smitfields has both cores on the same die. Whats the difference? Looking at Dempsey and Presler it seems to have two smaller dies.
Xtreme-lurker since 2002
- In reply to FCG's new opteron serverOriginally Posted by aMp
![]()
Lian Li PC75 | Iwaki MD20RZ | Thermochill 120.3 w/ 6 panaflows | Storm G4 | Maze 4
Hardware soon to come...
why do you keep postingslap:
etc all the time?
![]()
noldor, the differenc eis that intel can pick two good clocking cores and make a "dual core cpu" with them putting them on the same package. that improves the yields... currently you have two cpu cores next to each other and if one of the clocks bad then you have to clock the entire dual core cpu lower.
Thanks for the info Saaya. Helpful as always![]()
![]()
Xtreme-lurker since 2002
- In reply to FCG's new opteron serverOriginally Posted by aMp
![]()
Lian Li PC75 | Iwaki MD20RZ | Thermochill 120.3 w/ 6 panaflows | Storm G4 | Maze 4
Hardware soon to come...
your welcome![]()
Nice post Saaya
Yonah is socket 480
Demsey and Presler are socket 775
The I2 is made to run on air cooling and there are larger racks with AC cooling built into the side. I have not seen a liquid cooled I2 but I think they are out there.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
thx charles, credits go to cooper though for finding that sweet pic!
he posted in another thread where it went pretty much unnoticed, i just posted a new thread for this
damn that itanium is big enough to work as a shaving mirror!
charles, do you know anything about 480 yet? i hope there will be 478 adapters so we can plug a yonah in an asus p4c deluxe or a dfi 925x t2
maybe a 955x with 478 socket?hmmm or why not a 955x board with a 480 socket
too low demand though, not worth it for a mobo series i guess... too bad...
Last edited by saaya; 06-11-2005 at 01:54 PM.
New chipsets are ready from several manufactures for the Dothan.
Napa should be ready and in OEMs hands in the next few weeks. I would expect something solid in July.
Yes I know something about the 480![]()
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
Don`t know exactly, but I`ve seen some reports that Yonah will be on 478 pin Socket. here is the pic of it in my post attachmentOriginally Posted by FUGGER
Could be a 90nm prototype made before 65nm was ready.Originally Posted by saaya
ebay under aws983s, heatware under Mr. Tinker.
Bookmarks