Celoron M(dothan)-

**Backbone** · 06-02-2005, 09:03 AM

I read all threads about Pentium M but I can't find nothing about Celeron-M
with Dothan core 1mb.Please post some results.
Thx

**ibby** · 06-02-2005, 09:19 AM

some results are int he dothan thread.

**Backbone** · 06-02-2005, 10:32 AM

I find only one post by Macci.

**Kamerat** · 06-02-2005, 10:41 AM

The problem with the Celeron M is the FSB-limit, 165-180MHz. This is the case for all B1 revision and earlier Dothans.

It's still cheap power.

**Backbone** · 06-02-2005, 10:46 AM

Originally Posted by Kamerat

The problem with the Celeron M is the FSB-limit, 165-180MHz. This is the case for all B1 revision and earlier Dothans.

It's still cheap power.

Please post some Super Pi results

**Kamerat** · 06-02-2005, 11:06 AM

Originally Posted by Backbone

Please post some Super Pi results

I'm sorry, got my Pentium M 730 in the adapter well isulated. Don't wanna break the isulation to test my Celeron M 350 in Super PI.

**lktuio** · 06-02-2005, 11:29 PM

Stock voltage and cooling. Using Celeron 350J. Still trying to find a way to get 100% overclock (2.6 G)

**malfunction!** · 06-03-2005, 07:17 AM

Originally Posted by lktuio

Stock voltage and cooling. Using Celeron 350J. Still trying to find a way to get 100% overclock (2.6 G)

I also have a 350J that does the same on stock volts (in my Aopen 855GM board with a passive heatsink). Am waiting for my CT479 to arrive so I can swap it out into another board, up the volts and see what I get.

**Backbone** · 06-06-2005, 12:48 AM

What do you think about
Celeron M 370 1.50 GHz 1 MB 400 MHz 90 nm 21 W
which is based on Sonoma core.Can that baby clock like 533 Fsb's Pentium M

**DrJay** · 06-06-2005, 03:01 AM

Originally Posted by Backbone

What do you think about
Celeron M 370 1.50 GHz 1 MB 400 MHz 90 nm 21 W
which is based on Sonoma core.Can that baby clock like 533 Fsb's Pentium M

Maybe. Might still have problems with FSB over 180 though. I also had that problem with a C-M,....max 173fsb.

**caater** · 06-06-2005, 03:51 AM

Originally Posted by lktuio

Stock voltage and cooling. Using Celeron 350J. Still trying to find a way to get 100% overclock (2.6 G)

Are you running it on ct-479?
if so, have you tried to increase voltage a bit and to boot at 200/201 fsb?
i'm thinking of getting this cpu+adapter myself, as multiplier (13x) is ideal for
air/wcooling and the price anit too high.
but i'm afraid it hits the wall at under 2.6ghz

plus i haven't been able to find this cpu in finland or in estonia, only J-model available is 370

**Backbone** · 06-06-2005, 08:29 AM

Originally Posted by DrJay

Maybe. Might still have problems with FSB over 180 though. I also had that problem with a C-M,....max 173fsb.

Can you adjust multipilier ?
lktuio:This Super pi result is too low.My winchester beat that at 2400 mhz

**yodadu92** · 06-06-2005, 11:14 AM

Celeron M are b1 core, so boot at fsb 200 are very hard.

And I have try EIST and CrystalCPUID to change multi but no result with a celeron 350 + p4p800e

**caater** · 06-06-2005, 11:42 AM

Originally Posted by yodadu92

Celeron M are b1 core, so boot at fsb 200 are very hard.

And I have try EIST and CrystalCPUID to change multi but no result with a celeron 350 + p4p800e

celeron M 350J ,360J and 370 are all c0

but no speedstep, that's true..

btw, superpi is indeed low.
macci had this result:

Originally Posted by macci

First test w/ the adapter and P4C800-E => Celeron 1.3GHz @ 2.12GHz (1.24V) => SPi1M 37sec (almost 36 ). ram @ around 203MHz 2-2-2-5.

**yodadu92** · 06-06-2005, 01:59 PM

Originally Posted by caater

celeron M 350J ,360J and 370 are all c0

but no speedstep, that's true..

btw, superpi is indeed low.
macci had this result:

Ahh that is the diferrance between 350 and 350J. Thanks

**busta`** · 06-06-2005, 02:29 PM

I don't mean to thread jack, but how is the Banias core in terms of performance?

**~~totensiebush~~** · 06-06-2005, 04:50 PM

Originally Posted by busta`

I don't mean to thread jack, but how is the Banias core in terms of performance?

apparently Dothan Celeron-M is somewhat higher performance due to a couple enhancements. It also uses less power at standard vcore

**DrJay** · 06-07-2005, 12:32 AM

Originally Posted by Backbone

Can you adjust multipilier ?
lktuio:This Super pi result is too low.My winchester beat that at 2400 mhz

Not with EIST...

**yodadu92** · 06-07-2005, 02:40 AM

Some result with one or two tweak: 34sec at super pi 1M and 283pt for cpu mark

**caater** · 06-07-2005, 03:13 AM

Originally Posted by yodadu92

Some result with one or two tweak: 34sec at super pi 1M and 283pt for cpu mark

that's very nice score for a celeron, m8

any word on cooling and any chance to boot @ 200 fsb?

wonder what 2M dothan would do at exact the same speed and mult..
anyone with a dothan, care to do a little superpi run @ 13x184 ?

**yodadu92** · 06-07-2005, 04:20 AM

I can't go highter, systeme freeze if i give him one more mhz. I will try to do pin mod and mod my vddr, but i thinks i'm hurt on fsb wall due to b1 core

.

**Backbone** · 06-09-2005, 10:14 AM

Have C0 cores have problem with FSB ?lktuio have it but he can't reach above 180.

**caater** · 06-09-2005, 12:06 PM

Originally Posted by Backbone

Have C0 cores have problem with FSB ?lktuio have it but he can't reach above 180.

C0 celerons _should_ be good.. but i haven't seen anyone around with one yet...

**Backbone** · 06-09-2005, 02:31 PM

http://content.it4profit.com/itshop/...=asbis&LANG=bg
That is in my local shop.
But the socket is 478 wtf ?

**caater** · 06-09-2005, 02:38 PM

Originally Posted by Backbone

http://content.it4profit.com/itshop/...=asbis&LANG=bg
That is in my local shop.
But the socket is 478 wtf ?

nah, just some confusion

cpu has 478 pins, but socket is still 479

but if you're going to use ct-479 and air/water-cooling, then only 350J is good choice.. the others just won't boot at 200fsb

Thread: Celoron M(dothan)-

Thread Tools

Search Thread

Rate This Thread

Display

Celoron M(dothan)-

Bookmarks

Bookmarks

Posting Permissions