XMS4400C25 VS Ballistix 4000 on DFI NF4 SLI-D.

[FLDQUY157]

We are planning to get the board + a 3700+ Sandie very soon. But in terms of practical overclockability on the average, we have minimal knowledge, except their rated speeds, timings, and Vdimm's.

We have not heard much of criticism on Ballistix on this Forum, however.

So, we would like to hear from you guys about your experience or what you have heard, how they differ in their charateristics when being OCed, and anything you'd like to share about the 2.

Thank you very much.

Regards,
FLDQUY157.

[fatfreepork]

ballistix gets up to 280 in some cases.

[brandinb]

ballistix has a 1gb stick which i think is nice and of the rare results i see it seems promising for 2gb 1t setup
________
THE YAZIDI BRANCH OF YAZDANISM DICUSSION

[FLDQUY157]

ballistix has a 1gb stick which i think is nice and of the rare results i see it seems promising for 2gb 1t setup

He he he...I'd have to sell one of my kidneys to buy that stick.

But, seriously, I do not think that Ballistix ram products are too much overpriced.

My bro and I are looking at a pair of 512MB sticks, presently.

[Sniper 86]

Week 40, Year 2004 Crucial Ballistix pc4000 2x512mb on DFI LanParty nf4 Ultra-D.

Dual channel:
235mhz 2.0-2-2-5 3.16v
240mhz 2.0-2-2-5 3.4v
242mhz 2.0-2-2-5 3.5v
255mhz 2.5-2-2-5 2.8v
260mhz 2.5-2-2-5 2.9v (dailyuse)
265mhz 2.5-2-2-5 3.12v
273mhz 2.5-3-3-5 3.16v
275mhz 2.5-2-2-5 3.4v
283mhz 2.5-4-4-8 3.16v
285mhz 2.5-3-3-6 3.6v
288mhz 2.5-4-4-10 3.16v
302mhz 2.5-4-4-10 3.16v (only shot)

Single Channel (bank 1):
250mhz 2-2-2-5 3.4v
282mhz 2.5-2-2-5 3.4v
286mhz 2.5-3-3-6 3.4v
287mhz 2.5-4-4-8 3.4v
273mhz 2.5-2-2-5 3.0v

Single Channel (bank 2):
240mhz 2-2-2-5 3.4v
276mhz 2.5-2-2-5 3.4v
290mhz 2.5-3-3-6 3.4v
292mhz 2.5-4-4-8 3.4v

I have tested 1x512mb Crucial Ballistix Tracer and do
250mhz 2-2-2-5 3.4v
280mhz 2.5-2-2-5 3.4v
300mhz 2.5-3-3-6 3.4

[DeltZ]

for a less uber stick my pc3200 ballistix does 267mhz 2.5-3-3-6 single channel...2.8 volts..