The resistor should be 550Ohm.
![]()
Solder 10KOhm VR in parallel.
Measure vGPU on back of the card here:
![]()
Thats it. Lowering 550Ohm by each 25Ohm will increase voltage by 0.05v.
The resistor should be 550Ohm.
![]()
Solder 10KOhm VR in parallel.
Measure vGPU on back of the card here:
![]()
Thats it. Lowering 550Ohm by each 25Ohm will increase voltage by 0.05v.
Bookmarks