hahaha, gotcha !! It's actually in paint, I think under view, then "invert colors"Originally Posted by ZMarre
hahaha, gotcha !! It's actually in paint, I think under view, then "invert colors"Originally Posted by ZMarre
DFI LP UT NF4 Ultra-D 623-3
Opty 170 @ 2.8 z9500
G.Skill 1GBFX @ DDR560
eVga 6800GS @ 485/1.15
2xRaptor74 R0 sata
OCZ 700w GXSSLI
Antec SuperLanboy Case
Paint skillz are to be fearedOriginally Posted by tytlyf
BTW: this is my 2nd computer:
Little small neat case
Build for silence, and this is the last pic you've seen of it while A/C, 'cause my when my pump arrives I'm gonna put my W/C into it. With passive rad
And I'll start my casemoddingproject (theme: sun/heat ) after I've finished exams.
Originally Posted by HiJon89
That looks niiiiiiice
2 cents more. XP90C papst 92mm 2000rpm fan.
Last edited by blueworm; 05-02-2005 at 11:04 AM.
Registered linux user #271604 Get Counted! http://counter.li.org/
Lian Li PC60, OCZ powerStream 520W PSU,MSI K8N Neo, athlon64 3400+(@220x11),Thermalright XP90C, 1Gb Kingston HyperX (TCCD), Gainward GS 6800GT(@400/1115), Zalman-VF700-Cu, TB SantaCruz, M-audio revolution7.1 > pimeta amp > hd595
I need to do some cable management, but whatever
AMD Opteron 165 @2.6Ghz [w/XP-120] | G.Skill 3200 2GBHX | DFI LanParty UT NF4 Ultra-D
Seagate 320GB 7200.10 | POV 8800GT | Lian-Li PC65 | Enermax 600W SLI | Benq FP937S+
Main Rig:
XP-120 w/ Panaflo 12L + Arctic Cooling Silencer ATI1
Second Rig (server):
Zalman CNPS7000A-cu + Zalman NB47J + Zalman HP-80C
Example of my camera struggling to see anything in the darkness :
old pic:
Last edited by TMM; 05-07-2005 at 04:21 AM.
Opteron 170 @ 3.0Ghz on air, Opteron 144 @ 3.1Ghz on air
GOOODNESSSSSS what fan is that got a link?
InSanCen,
is tat a 15cm fan?
it huge
Well, on the short side it's 15cm/150mm. It's a Papst 172x150mm (And that's a FULL Tower case, 5x5.25 bays!) Casing is metal (Cast?), and looks Uberr polishable (But my case is bllack, and as you can see by the wiring, I'm not at the looks stage yet, rather get it running right First)
Aprox 120CFM at 12v, relatively quiet (considering the amount of air it pushes), about the same as a Delta SHE (Not the EHE!), but Much Quieter.
Small fan is an 80mm Delta EHE for comparison purposes
Originally Posted by InSanCen
I have one of those fans for an intake in my case, except it's pushing 235cfm on full crank!!
Heres my old GeForce 4 mx420 card modded with an AMD heatsink
http://home.cogeco.ca/~rmcinnis2/P5221296.JPG
http://home.cogeco.ca/~rmcinnis2/P5221297.JPG
Stock 250/400 max stable overclock is 350/455 (40% overclock on the core )
Next step is Volt modding her
AMD AM2 4200+
Asus M2N32-sli Del
1GB OCZ PC6400
ATI 1950xtx 512mb
My comp
My card
Other photos http://people.overclockers.ru/Sanuch/gallery
Last edited by Sanuch; 05-27-2005 at 10:18 AM.
for other photo see here ( sorry its in Italian language)
http://www.webalice.it/svl444/sitoweb/home/homepage.htm
ps. dayly use i have a stock amd cooling fan on venus12 and every other fan on +7volt by Hardcano9
Last edited by SvL; 05-28-2005 at 02:13 AM.
What NB cooler is that?Originally Posted by Sanuch
A moddified Zalman VF-700cu. Made for gfx-cards actually, but seems to fit also on NB, with some modificationOriginally Posted by Minstadave
@SvL: nice, but I've little Q myself: did this actually works to lower the temps?
This plaque of 2,5x2,5 cm width micro fins on rear is not very effective to lower the temps , but width it i reached a a little bit more overclock ..2160 to 2190 mhz on Xp 1700+ .
Minstadave Zalman VF-700 without fan, at heating it slightly warm
ZMarre
I wonder if that would fit on a DFI NF4, my butchered Zalman does the job but that looks much nicer.Originally Posted by Sanuch
Last edited by Minstadave; 05-29-2005 at 01:39 AM.
Thx, worth tryingOriginally Posted by SvL
That doesn't fit on nothing but a gfx-card With some modifications it fits everywhereOriginally Posted by Minstadave
@CaLume: damn which sempron mobo is that? It's so tiny, the HSF is almost bigger then the mobo
Last edited by XiN; 05-30-2005 at 11:48 AM.
Enermax Noisetaker 470W
Opteron 165 @ 2700 mhz 1.375v CCBBE 0616XPMW | XP-120 w/ Akasa 120mm
DFI LanParty NF4 Ultra-D | Bios NF4LDB14
1GB G.Skill 4400LE
Club 3D X800XL@460/1100 | Silencer 5 rev. 2
DDR630@7-4-4-2.5-1T SuperPi 32M stable
For the fun of it, here's mine.
Bookmarks