Venice, Stepping and Oc Database

[musk]

I am not sure about Prime yet. I ran it for 30 minutes last night. Am burning in right now and will post. That was probably 20 minutes after I got the machine running. I was just so pumped to have a chip.

I did run superpi, with prime in the back ground, surfing for 10 minutes and it was fine.

APAW

Well it failed prime small fft after 1 hour, i am going to continue burning and see if I can get prime stable at 2900 with 1.408v

***Update*** =- burning in at 2950 with 1.5v - totally solid at 2900 for over 12 hours at 1.4v . went 110% to get 1.5v,could of gone lower I suppose, and get into windows at 2950



musk

[s7e9h3n]

May as well post an update on my cpu:

3200+ LBBLE 0515APAW on a stock heatsink (with a 80-70mm fan adapter):


3dmark, stock cooling, unoptimized, 6600gt @ 562/1126:


Trying to get some stability here still:

[Deus Falsus]

What mobo R U using?

May as well post an update on my cpu:

3200+ LBBLE 0515APAW on a stock heatsink (with a 80-70mm fan adapter):


3dmark, stock cooling, unoptimized, 6600gt @ 562/1126:


Trying to get some stability here still:

[s7e9h3n]

What mobo R U using?

SLI-D

[Cornelious0_0]

SLI-D

I wish I had results like yours...my chip sucks.

[D3kMatrix]

3200+ LBBLE 0516APAW - 2800MHZ 1.408V AIR - D3kMatrix XS/OCforums

Prime/SuperPI/Gaming/3DMark Stable
This is not the ceiling of this chip either, will post another update after some more Priming/Burning.





Thats is the only screen shot I have for 1.4v @ 2800, but if u need one with more Prime time heres one at 1.55v @ 2800 for 19 hours

[Sin22]

3000+ Venice LBBLE 0517BPMW
Abit AV8
2x Micron Rev5B "C"
CM Hyper6

http://valid.x86-secret.com/show_oc?id=18910

Screenie was a tad screwy, needed 1.625v for that.

[187(V)URD@]

sin22 how far did you reach on aircooling on standard voltage ?

@D3kmatrix : very nice cpu you got there.

[Sin22]

, never did test standard voltage a lot to be honest. I think the last i tried was 260x9 and it was on default volts and could boot fine. After that I jumped straight to 312x9 @ 1.6v and it booted fine and from there fine-tuned it.

[mongoled]

3000+ CBBLE 0512DPBW - 2922 MHz 1.58v boxed cooling

wil post pics soon

-Offtopic-

Ive noticed tht the CPU's tht share this stepping (same as mine) all max out at almost the same speed i.e between 2900-2930mhz. Im wondering r u using a HTT speed of 325mhz? Please PM your answer, thanxs

[TEDY]

so CBBLE is good stepping and 0515 good date , right ?

[s7e9h3n]

so CBBLE is good stepping and 0515 good date , right ?

I dunno if there's any cbble 0515's though. Seems as if the cbble's were produced earlier than week 15.
Here's what I did last night - still on aiir. I'm tempted to fire up the mach2 even with the dent in it's condenser

[Toki]

I dunno if there's any cbble 0515's though. Seems as if the cbble's were produced earlier than week 15.
Here's what I did last night - still on aiir. I'm tempted to fire up the mach2 even with the dent in it's condenser
[...]

Hi s7e9h3n

What kind of air cooling? Still stock heatsink with fan adapter??

[s7e9h3n]

Hi s7e9h3n

What kind of air cooling? Still stock heatsink with fan adapter??

Hehehehe For this one I used a Hyper6 I just bought. I must say that it's a very, very good heatsink. Keeps load temps about 10 degrees C cooler than the stock cooler. I think I'll take a shot at 3g 32m stable on air before throwing her under an evap

[sobol]

Sorry for not updateing list , but ive sold my Winnie and was couple days without my orginal box. Today my cpu arrived its LBBLE 0517 EPAW.
Seems its not top one , for now 2700 mhz 1.48v , but my cooling sucks ( 51o Pentagram Freezone QC-80 CU ). Tonight ill try to gather results from forum and update list. Greetz.

[KamE38]

By me:

3000+ lbble 0516 cpcw 2610 1.65v stock heatsink stable
3200+ lbble 0517 bpew 3004 1.65v stock heatsink suicide shot
3200+ lbble 0517 bpew 2800 1.56v stock heatsink stable

[Cornelious0_0]

You can put this up for me.....

3000+ LBBLE 0516EPKW - 2700MHz 1.696v Air - Cornelious0_0 XS

[Trevor]

ADA3000DAA4BP
LBLLE 0516GPAW
prime/3dmark stable at 2754MHz, not stable at 2808MHz and above.
Cooling: Air Xp120 heatsink

[TEDY]

sticky this :=)

[lehmin]

LBBLE 0516GPDW 3200 onyone? bad or good?

[sobol]

List updated.
Seems that whole 0516 week was bad. Only exempt is great stepping *PAW , but even it is bit worst ocer then other weeks.

Seems there is no bad ocers from 0517 and each one hit 2700 with quite normal voltage.

Only one 0518 , and result isnt bad 2853 mhz - 1.696v , lets hope all 0518 will be nice.

Greetz

[s7e9h3n]

Hey sobol, great work here. Just a couple of corrections for my cpu's on the list though:
3200+ LBBLE 0515APAW - 2906 MHZ 1.584V AIR - s7e9h3n XS
Should be 1.55 and spi 32m stable
3800+ CBBLE 0504EPMW - 3306 MHZ 1.664V ???? - s7e9h3n
Mach2 cooling
Your hard work is appreciated by all here. Thanks!

[sobol]

s7e9h3n , thanks, took me only 4h to collect it
Your results updated.

[D3kMatrix]

Yeah this is really nice to have
Thanks for doing this Sobol!

[Pazu]

Great work.


After having a look at the data, there are 5 entries for the 3200+ LBBLE 0515 APAW, all of them doing at least 2800mhz at 1.55v or under, on air cooling. I think this is the only one that really stands out at the moment as a consistent good oc chip. There are some other steppings that are doing quite well as well, but I'm hoping there will be more information on them later.