well guys, I just got done 3dmarking 510-2 bios, now I'm set at 9x285, using the same settings as the 2-17, except tref is now 3072 instead of 40**somthing. main timings are still 2.5 3 3 6. Not bad, about 10 more mhz on 1.45 volts for 3dmark2001 stable. Also, winflash is a very good prog to use, just don't do it unless you are running stock settings, DO NOT do it while your settings are oc'd3dmark score with a vanilla 6600 gigabyte was about 19,500ish, don't remmeber exact score.
ALIENS are bringing my next kentsfield based rig in a UFO case!
whats reguarded as the most stable / compatible bios?... im not OC atm... all stock.. thnx
Hey the link to the 510-1 bios is really 3 and vise vera if you want to correct that?
Bourch and Hardcoreclocker: I have same situation here as you two.
Nghhh...I posted my problems at different thread. Hopefully, members over there won't angry. So now, I am clear that is my Bios that caused problems.
Both of you has get rid of the problmes? Pls guide me in my problems. . I am using Bios 310 (official) and problems occured so I flashed it to Bios 331-1 (oscar wu), but same problmes, too. Too bad if my Bios ROM is faulty. I don't know can I RMA the mobo becuase of the BIOS ROM's faulty. Really appreciate your help and I need your help desperately. Thank you in advance.
OK, thnxs for that i just fixed the links
Dragon
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Please amend this line:
"Bootable CDROM (ISO) DOS Image w./ All Bios Revisions to Date (5/10/05)"
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
The best bios for the sli-dr and VX PC-4000? Stick with 310 or is a 510 better? Which one?
which one ois better then. The 510. Should I try the 510-3, 510-2??
The 510-2 would probably be better, the 510-3 is considered a "general" bios, but seems to treat TCCD alot better than it does UTT
Team Rufio
Originally Posted by pershoot
Do you want me to change it? To?
Dragon
If you want you can just PM
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Thank for the so cool thread. Can we flash the BIOS using the WinFlash utility? I think it faster and simpler than using the floppy which has an unstable quality.
You guyz may download the WinFlash here.
BTW, I wanna ask is there any version of BIOS which implemented the MemTest86 into it?
Vigga ['vigə]: is a slang term used to describe a Vietnamese who dresses,
speaks, or otherwise behaves in a manner that is stereotypically associated
with certain aspects of black culture.
bootable cd not workin for ya?
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
I dont have a burner to burn the boot image to CD(. So I choose WinFlash :d
Vigga ['vigə]: is a slang term used to describe a Vietnamese who dresses,
speaks, or otherwise behaves in a manner that is stereotypically associated
with certain aspects of black culture.
Winflash is fine that is what i always use to do my flashing with...
dragon
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
i flash off hdd now via awdflash method. i cant boot off cdrom on the 510's, due to it it not 'properly' detecting my cdrom for booting purposes.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
cdrom image has been updated with hellfire's (dfi-street) 510-2.
Testing-
---
DFI LP DK 790FXB-M2RSH - 1/16 Beta
---
Phenom II X4 940 (CACVC AC 0850BPDW), 3.82GHZ (19x201) @ 1.46v (+150mv), NB: 2.61GHZ (x13) @ 1.3375v (11), HT: 2.61GHZ, PCI-E: 101MHZ, CPU: P-1 state
---
OCZ Reaper, 2x2GB @ 2.015v, MaxMemClk-1066-5-5-5-15-20-195x4, DDR2-536, Tony's 1066 Phenom SPD
---
Corsair HX620, Swiftech 2xMCR120-QP + MCRES-Micro, MCP-655, Vortex XP (D-tek Fuzion v1), 1/2"
whats this new 510-2?
i have the first 510-2 that came out, whats new with this 'hellfire' one?
common bug, its voltage related. i hear oscar has bigger issues so wont be fixing it for a few weeks at least.
trick is to hit ins (the zero on the numpad) and hold it just after powering system, PC loads at stock settings without saving them....
get into BIOS, lower your multi 2-3 notches. (so its roughly stock Mhz) reboot, and raise it back and it should be fine from then on.
its just a cold boot bug where the startup voltage doesnt set right, i beleive.
Can someone answer, has anyone gotten better results by going back from 5/10 2 bios to the 3 bios?? I cannot get my 3000+ venice over 2300mhz stable with this 5/10 2bios..
try running it at 2T
Basically, word is that most beta bioses for venices dont like running 1T overclocked yet.... will be worked out in final versions. so try 310, 316, or set it to 2T
The cold boot issue is something they know about, know the cause of, but don't have the TIME to fix it?
Am I reading this right?
Zen2 Has brought AMD back!
something like that, yes. its a beta bios not a final. 310 (final) seems to work without this, i assume it would be fixed in the next BIOS or two. (as very few people seem affected anyway)
2t im not familir with this??
Very few people are affected by the cold boot/ 3 led syndrome?
You must be kidding me......
There are a BOATLOAD of folks having boot issues with this board.
It should have been fixed already.
There is a thread here, that is NOT even about the boot problems ( AN8 thread I think), where at least 3 folks complained about it in there, there are threads here, amdmb, OC,dfi etc... discussing this problem.
This problem is bigger than they think, and they know about it ( although they can't reproduce it), yet it's not important enough to support folks that already spent money on this buggy board?
What good is a board that ya have to fight with everyday when starting it up?
I never saw any print in the manual stating ya had to leave it on 24/7 to keep it running.
Anyone else see that in the manual?
Didn't think so.
Don't mean to sound off on you, but if what you are saying is true, then thats just plain BS.
Either that or we are talking about something completely different.
Good Day
m
Last edited by muzz; 05-24-2005 at 05:34 PM.
Zen2 Has brought AMD back!
its a memory timing. also known as CPC. 1T is CPC on (enabled) 2T is CPC off (disabled)
Posting Permissions
Reply With Quote
Bookmarks