MMM
Results 1 to 25 of 103

Thread: 3700 San Diego vs. 3200 Venice: Round 2!

Hybrid View

  1. #1
    Phenom™
    Join Date
    Sep 2002
    Posts
    5,163
    Quote Originally Posted by ewitte
    Superpi tends to care more about latency. If I leave the memory timings at default I'd probably get about 31s at 2.8Ghz as well. With them tweaked its 29s. Thats 2.5-3-3-7-1T (10,12 and mostly 3's). It could easily be 27s or even 26s if I could pull 2-2-2-5-1T.

    Eric
    Ok, I was curious so I browsed through the Spi thread and this is the listing of 26sec and 27sec Spi1m runs:

    18. Mauri Antero - 26.00 seconds - windows - P4 560 @ 5118 [/mbot]
    [mbot] Mauri Antero26FX53 @ 3152
    19. Sucka - 26.00 seconds - windows - FX55 @ 3185MHz
    20. PetervanDamned - 26.00 seconds - windows - amd 4000 @ 3150 mhz
    21. cpulloverclock - 26.00 seconds - windows - 3000 .09@3046.9MHz Epow 9NDA3 rev2.1
    22. Kunaak - 26.00 seconds - windows - P4E 2.66Ghz @ 4.76Ghz
    23. ford - 26.00 seconds - windows - p4 640@4500mhz
    24. Cranox - 26.00 seconds - windows - A64 Venice @ 3200 mhz 2.2.2.5
    25. enduracell - 26.00 seconds - windows - Win2k3 3500 CAA2C@11x292/13_UTT_Mach1
    26. Dani - 26.00 seconds - windows - A64 3500 130nm S939 301x11DFI nF4 UltraD2xKHX3500 BH5
    27. LardArse - 27.00 seconds - windows - P43.4EE @ 4744, 339 FSB 3:2
    28. hallowen - 27.00 seconds - windows - FX53 @ 3176.4Mhz 235.3Mhz FSB 1:1 Cas 2,3,2,6,11,16
    29. The Stilt - 27.00 seconds - windows - 4722MHz
    30. GomerPyle - 27.00 seconds - windows - FX53@2998MHz 2225
    31. pc ice - 27.00 seconds - windows - FX53@3102MHz 2225
    32. Hoschi - 27.00 seconds - windows - FX53@3026MHz 2225
    33. Niaboc79 - 27.00 seconds - windows - FX53@273*11 (2 2 2 1 7 12 1T)
    34. Shidokanjohn - 27.00 seconds - windows - P4 3.4 EE 2 x 256MB Kingston value ram BH5
    35. freecableguy - 27.00 seconds - windows - LGA775 3.4EE ES@ 4.42Ghz (260x17) on DFI LP925XT2 w/OCZ PC24200 DDR2
    36. Team Bertha - 27.00 seconds - windows - A64 @ 3103Mhz 310*10 ddr @ 282Mhz


    Nobody does 27's @ 2.8, actually, nobody does 27's short of 3G. It just isn't possible with our procs/hw.

  2. #2
    Xtreme Addict
    Join Date
    Feb 2005
    Location
    USA
    Posts
    1,692
    Quote Originally Posted by s7e9h3n
    27. LardArse - 27.00 seconds - windows - P43.4EE @ 4744, 339 FSB 3:2
    28. hallowen - 27.00 seconds - windows - FX53 @ 3176.4Mhz 235.3Mhz FSB 1:1 Cas 2,3,2,6,11,16
    29. The Stilt - 27.00 seconds - windows - 4722MHz
    30. GomerPyle - 27.00 seconds - windows - FX53@2998MHz 2225
    31. pc ice - 27.00 seconds - windows - FX53@3102MHz 2225
    32. Hoschi - 27.00 seconds - windows - FX53@3026MHz 2225
    33. Niaboc79 - 27.00 seconds - windows - FX53@273*11 (2 2 2 1 7 12 1T)
    34. Shidokanjohn - 27.00 seconds - windows - P4 3.4 EE 2 x 256MB Kingston value ram BH5
    35. freecableguy - 27.00 seconds - windows - LGA775 3.4EE ES@ 4.42Ghz (260x17) on DFI LP925XT2 w/OCZ PC24200 DDR2
    36. Team Bertha - 27.00 seconds - windows - A64 @ 3103Mhz 310*10 ddr @ 282Mhz[/I]

    Nobody does 27's @ 2.8, actually, nobody does 27's short of 3G. It just isn't possible with our procs/hw.
    does that mean I'm the first one to hit 27's with 2.91 Ghz?!?! not sure if the patched version count though

    27's @2.8 might be possible if I can pull off a 28x (1.5-2-2-x) x10 with extremely tight timing and high vmem.
    Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
    Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.


    Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
    WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •