"402 XTREME" in action! Take One: Breaking 3GHz barrier!

[bachus_anonym]

Ok, this is gonna be the last one, I promise I just thought that since I'm on it I will show you some more testing I've done tonight

I wanted to see, what difference is between temps shown in BIOS / Hardware Monitor in comparison to temps I got from all 3 probes. Sitting in BIOS gives CPU a little bit of excercise. Then I run same LOAD test in Windows, as I did last time: PRime95 SmallFFT.

1.This is what BIOS shows for temps.

2. Then we see temps from probes: TEMP1=CPU IHS TEMP and TEMP2 is BLOCK TEMP

3. The I switched probes to show evap temp: TEMP1=EVAP IHS TEMP and TEMP2 is BLOCK TEMP

4. This is sitting IDLE in Windows: TEMP1=EVAP IHS TEMP and TEMP2 is BLOCK TEMP

5. Again, with probes switched: TEMP1=CPU IHS TEMP and TEMP2 is BLOCK TEMP