The San Diego OC DISCUSSION Thread

**sideeffect** · 05-08-2005, 06:51 AM

hi Cador

Im using stock cooling on my 3700 at the moment and its running at 2750 mhz 250 x 11 at 1.47 volts.

I did take the stock fan off though and am using a sunon 80 mm fan temperatures are 29 degrees idle and 42 degrees load. Havnt tried for more clocks yet as i have a vapochill to put the mobo into.

Regards

CPU number
ADA2700DAA5BN
CABGE 0515SPMW
1237218D50918

**Ryan45** · 05-08-2005, 08:44 AM

Yes Monarch shipped mine on friday, so i will get it on Tuesday

Hopefully my Neo2 doesn't give me any

.

**obscurehero** · 05-08-2005, 09:53 AM

Ok, sorry guys who've been waiting forever...

I ordered my 4000+ on friday, and they gave me 2 day automatically. Its on its way supposedly. However, that brings me to a question. I have some ocz vx pc-4000 and a dfi sli-dr. Should I use the 414-3 bios (I think I got that right)? Is that the best bios to use for winbond utt?? I guess the tccd bios of choice is 414-1 but for the utt???

**ADM** · 05-08-2005, 10:59 AM

Originally Posted by obscurehero

Ok, sorry guys who've been waiting forever...

I ordered my 4000+ on friday, and they gave me 2 day automatically. Its on its way supposedly. However, that brings me to a question. I have some ocz vx pc-4000 and a dfi sli-dr. Should I use the 414-3 bios (I think I got that right)? Is that the best bios to use for winbond utt?? I guess the tccd bios of choice is 414-1 but for the utt???

The 414-3 appears to be good for most people at the moment with the new cores and UTT.

**Rubescen** · 05-08-2005, 11:08 AM

for those who couldn't get your SD to OC'ed past 2.75Ghz stable, can you please post the steppings? is it OEM or Retail?

**Rubescen** · 05-08-2005, 11:11 AM

Originally Posted by mad mikee

I have teh crappiest 3700 SD so far, can't boot @ anything over 2600 or 9x275 so far @ any voltages.

I will NEVER order a chip again, I MUST be able to SEE it in PERSON before I buy.
Me thinks winnie is going back in b4 teh end of the week and I will get my pleasure from this chip w/ a

since I won't be getting another for A LONG TIME

Maybe the heatsink didn't sit properly on the cpu? you can try different BIOS as well.

**GoodOmens** · 05-08-2005, 12:55 PM

From what I've seen all the san diego's have the same steppings now. Well the oems anyways.

**GoodOmens** · 05-08-2005, 12:56 PM

That a retail chip?? Not bad for stock cooling!

**ImportantAwareness89** · 05-08-2005, 02:02 PM

Can you guys list your cooling specs out when you post those on the actual OC thread? As well as your entire hardware setup preferably? Steppings too? Kthx. I like the screenies, but I need a bit more info with those.

**Spinal** · 05-08-2005, 02:28 PM

hello, I am I aim to order my San Diego but it is worth the trouble to pay 148dlls but between 3700+ and 4000+? ... since I want to replace my old Winchester Overclocker not very

**P_1** · 05-08-2005, 03:27 PM

Originally Posted by Spinal

hello, I am I aim to order my San Diego but it is worth the trouble to pay 148dlls but between 3700+ and 4000+? ... since I want to replace my old Winchester Overclocker not very

Translation: I want to order a San Diego, but I dont know if it is worth it to pay the extra 148dlls? for the 4000+ over the 3700+. Since I really want to replace my old Winchester that does not overclock very well.

**mrbios** · 05-08-2005, 04:02 PM

lol P_1, spinal it seems a bit much to pay for an extra 200mhz, get the 3700 and make it sweat imo

**mad mikee** · 05-09-2005, 04:20 AM

Originally Posted by mad mikee

I have teh crappiest 3700 SD so far, can't boot @ anything over 2600 or 9x275 so far @ any voltages.

I will NEVER order a chip again, I MUST be able to SEE it in PERSON before I buy.
Me thinks winnie is going back in b4 teh end of the week and I will get my pleasure from this chip w/ a

since I won't be getting another for A LONG TIME

(Then /me goes and quietly convinces machine to run memtest #8 for 1 hr @ 300x10 (of course not stable and have to run @1.7vcore

)
Then /me pulls out ancient mismatched set of .5G LLPT + .5G KHX3200 (BH5

) and fiddles some, ran OCCT (900 meg mem usage) for 5+ hrs last nite at sig settings w/ just about every setting LOW (haven't tried 1.5 CAS too much yet).).

Sig reflects current state of affairs. Also redid my water cooling loop and added my x800xl to the loop. New pics tonite in the WC gallery if I get time

(And I STILL Have to get the 2-342 installed in teh new case! )

**ante_ante** · 05-09-2005, 08:48 AM

What´s the differrence between thees 2 san diegos?

ADA3700DAA5BN
ADA3700BNBOX

?????????????????????????????

**pershoot** · 05-09-2005, 08:53 AM

Aa5bn = Oem
Bnbox = Retail

**pershoot** · 05-09-2005, 08:55 AM

3700+ came. CABGE 0515SPMW, AA5BN.

**ante_ante** · 05-09-2005, 09:31 AM

Originally Posted by pershoot

3700+ came. CABGE 0515SPMW, AA5BN.

Thank u mate

**Waus-mod** · 05-09-2005, 10:32 AM

Saftlad,

What cooling? and what stepping and week

**perry_78** · 05-09-2005, 11:17 AM

Originally Posted by conrad.maranan

The purpose of the "official" thread is for forum members to display their overclocking accomplishments. I weeded out 4 pages of this from the other thread: "Oooh. I hope my chip does that!"..."But is it Prime stable?"..."What's the default multiplier on that again?"...Where did you buy it?"..."Is it worth it?"

The point of this thread is for all other discussions with regard to the overclocks in the "official" thread. A lot of forum members like to get straight to the point with the screenshots without having to sift through a mile of smileys and other posts.

Ah, you are unfair conrad

I asked about the multi in there, and once I found the answer I deleted my post

**mrbios** · 05-09-2005, 11:41 AM

Originally Posted by Waus-mod

Saftlad,

What cooling? and what stepping and week

hes using phasechange

**cpulloverclock** · 05-09-2005, 12:03 PM

bad timings help to get a high cpu frequency with SD??

it's an impression

8M@3215MHz = 4'45"062

**soul** · 05-09-2005, 12:45 PM

Originally Posted by Rubescen

I wonder what kind of steppings and heatsink/fan we gonna get with these Retail version...

FedEx finally decided to show up with my stuff... haven't gotten it installed yet, but the IHS is labeled:

ADA3700DAA5BN
CABGE 0512XPMW

Also got a free t-shirt from Monarch. I got a good laugh when I noticed that the t-shirt has a sticker on the label that says "Warranty void if removed". Heh. Off to setup my system, and hope for the best...!

**Waus-mod** · 05-09-2005, 12:49 PM

Can you post results soul?

**Mrki** · 05-09-2005, 01:44 PM

Originally Posted by Saftlad

Stable

Best 1mbSuper PI

Dont know how many volts I dare put through this.

cooling?

**kryptobs2000** · 05-09-2005, 01:46 PM

phase change, cpu temp -13c, look at the pic

Thread: The San Diego OC DISCUSSION Thread

Thread Tools

Search Thread

Rate This Thread

Display

Reverse psychology is now working

Bookmarks

Bookmarks

Posting Permissions