OCZ PC3200 Gold new BH5 die + DFI NF4 SLI-D Part2

[eva2000]

Hmmm...I've been wondering...the new Bh-5 sticks need 3.6v for 260...whereas the VX needs only like 3.4v on avg for 260...opp got 265+ with 3.6v .

So VX > Gold BH-5 then ??? cos 260 @ 3.6v is really no big deal afaik...yes dual channel 1gig, but so is VX...

Perkam

averages mate, averages, averages of new BH-5 seem slightly higher than VX when you take into account average vdimm used and remember this is untested bh-5 versus binned GoldVX

personally i like OCZ PC3200 Gold more than my OCZ PC3200 GoldVX as it's 260mhz 2-2-2-5 vs 240mhz 2-2-2-5 respectively for me. But still my OCZ PC3500 Plat LE BH-5 DO 266mhz 2-2-2-6 at 3.6v

My point exactly...and VX does 260 at 3.4v ...hence my concern.

Perkam when you mean VX 260mhz at 3.4v you talking about PC4000 GoldVX right ? difference price range there This ram costs US$173 for 1GB pair.

as to A64tweaker settings it all depends on cpu/board/bios, as you can see the differences i had from part 1 vs part 2 of my testing on this ram with different cpu/bios etc

as to sandra buffered highest



my original BH-5 though



Rabbi, these modules are US$173 at newegg cheaper in USA heh

as to burn in i haven't burnt this ram in yet properly, but normally takes 8hrs to start seeing less errors in memtest per pass and 12-24hrs usually.

I have OPB's 4000+ san diego coming soon so will retest the ram at 11x260 or maybe 12x260