The Epox Challange !!!

[STEvil]

Orb is up...

Rest of madonion/futuremark is down...

I think I have had 5 consecutive heart attacks waiting for opp to drop JC with a 23k score.. 8-)

Run a 640x480 and give us a pic, opp 8-)

EDIT

What vcore are you using? I thought you got this thing to try and pull 3166, heh 8-)

[SPQQKY]

As you can see from his previous post, it's already in his project manager, just wrong cpu speed. This happens to me often, especially with pcmark.

EDIT: my bad, publish, not submit.....doh!

[BrainStorm]

Originally posted by SPQQKY
As you can see from his previous post, it's already in his project manager, just wrong cpu speed. This happens to me often, especially with pcmark.

EDIT: my bad, publish, not submit.....doh!

Actually, my last post was somewhat confusing on the submit vs. publish aspect. I think the supposed fix was to save before submitting, and then submit the saved file, as Nico suggests.

What it looks like is that OPP has submitted, but can't publish since there doesn't appear to be a check box for publishing.

OPP, did you save the project before you submitted it? If so, maybe you can resubmit the saved project (don't know whether you'd have to delete the original submission first or not).

[FragBuckler]

Sweeeet! i just read through this all.... GO OPP!
Not to wish JC bad or anything, but i would LOVE to see AMD on the top for 3dmark...

[MrIcee]

OPP

I have had the same trouble with the NF7-S the last 2 days. I adapted the Ti4200 volt mod to the ABIT Siluro Ti4200 OTES, which is a physically different card from the other Ti4200's..and have been doing R+D on the NF7-S on air.Every 3rd or 4th submission to the ORB couldn't be published. All CPU and card clocks were consistent from test to test...no rational reason for the scores being s*hit-canned.

There is definitely something with these nForce2 boards that are giving the ORB fits...or maybe more correctly, the 3Dmark2001 software..as it's the software detecting clock speeds, card clocks etc, etc. Keep plugging away my friend...just an outstanding job

Randi

[spaceman]

Originally posted by STEvil
Orb is up...

Rest of madonion/futuremark is down...

Well, hopefully, that means they're doin' some serious updating. Go OPP, show the EPoX non-believers, and take #1 while you're at it.

[FragBuckler]

Originally posted by spaceman
Well, hopefully, that means they're doin' some serious updating. Go OPP, show the EPoX non-believers, and take #1 while you're at it.

darn right! epoxs' rock!

[OPPAINTER]

I've saved and then submited and sent the result straight, and they both come up with no check box. I see the problem, it's the CPU speed is incorrect so the ORB is thinking it's a Fraud

Anyway, this epox has some problems, I can't use core voltage over 2.075, if I do I can't get into Windows. So there goes my 2900 Mhz plus 3d benches. Just can't get a nForce to work right around here, sure does some nice 3D though

OPP

[QuadDamage]

first of all, GJ OPP

i think they're preparing ORB for new 3dmark, my friends

i also had problems with publishing scores with Asus A7N8X and Asus Ti4200 AGP 8X. I think it's not nForce itself messing up with ORB but AGP 8X on these mobos... well, just my opinion.

OPP,

keep your setup rolling for new 3dmark2003

[STEvil]

I think a 5v mod may be in order... 8-/

Are we topping out the nForce? 8-)

[OPPAINTER]

Se Ya DJ , heh heh
Got ya with a little old AMD chip
Thanks DDTUNG


OPP

[OPPAINTER]

Can't publish this either, it is the right Mhz though.

[DDTUNG]

Deja vu.

DDTUNG

[OPPAINTER]

Originally posted by DDTUNG
Deja vu.

DDTUNG

Its been way to long

OPP

[BrainStorm]

WOW! Congrats OPP! That's kicking *ss and taking names!

Now if you can just figure out how to get the Orb to publish it

[OPPAINTER]

Originally posted by BrainStorm
WOW! Congrats OPP! That's kicking *ss and taking names!

Now if we can just figure out how to get the Orb to publish it

Yea, somebody get me a e-mail, this score has to published.
This was done on a old second hand OS, went straight from my NF7 to this mobo. I would predict takeing down Holicho by the end of the week with a clean install and a little figuering out the mobo. Maybe when I flash the bios and put in a new OS and it will somehow fix the Orb problem.

OPP

[BrainStorm]

Let's hope so! Well, have a good night. It's getting kinda late here in Dallas, but thanks for the late night entertainment.

And congrats once more...terrific job!

[QuadDamage]

OPP,

did you save the project and then tried to publish it, or you hit publish right after you did 3dmark run? damn, even ORB is Intel biased, lol

[STEvil]

Need more fsb...! 8-)

[OPPAINTER]

Heres some more FSB

And Quad, I did both methods, nothing works.

OPP

[AKRedneck]

Originally posted by OPPAINTER
Heres some more FSB....

OPP, what timings are you running?

[OPPAINTER]

On my 3D runs I was at 4-2-2- CL2, on the post above it was like 7-2-2- CL2.

OPP

[AKRedneck]

Well, I'm running 3-2-2 at the moment, approx same fsb as your runs.. I haven't seen any increase in sandra going from 4 to 3, however I haven't had time to check the diff in 3d. Apparently it makes a difference.

[STEvil]

Yeah.. bed time.. !

8-) Gonna log on tomarrow afternoon and have this thread be 9 pages long... damn. lol 8-)

[Wolf]

Great job on those bench scores. Do you think closing all the L11 bridges will give you more volts on those boards? I know it helps to get higher volts on most epox board if you give the cpu 1.85v by default. I'm sure you will figure it out soon enough.