GSKILL 512LA @326 1T, any room for improvement??

[ben805]

Cooked my last pair of GSKILL 512LA when I tried to run Trtw and Twtr at 1, just received my replacement today and they'd fired right up at 326 x8, passed Memtest #5 for couple hours then went straight to SuperPI 32M and passed it too!! Now, before I attempt to fine tune anything can someone please be so kind to give me some advice as to where else can I tweak to break the 326 barrier safely without frying another pair of 512LA? my 3000 winnie is Prime95 and SuperPI 32M stable at 2686mhz if I run 316 x8.5 so I know this cpu still has room for improvement....for now I'm stuck at 326 x8, please help..

[agenda2005]

Nice chip and good overclock.

[ben805]

thanks I'd dropped the Trfc down from 24 to 14, and Max Async Latency from 9ns to 8ns, Memtest #5 at the moment at 64 passes, going to let it run for a shortwhile and if it didn't error out then I'll crunch the SuperPI 32M again, these two tweaks alone gave me just a little more bandwidth....better than nothing I guess, I think my 512LA hit the wall at 326, pumping up the vmem from 3.1v to 3.2v did not allow me to clock any higher, memtest #5 error out even at 327, if I can't figure out how to break the wall then I'll try to tighten up the rest of the timing and see how it goes, I'm using 331-3 BIOS.....this is the one and only BIOS allow me to run these GSKILL TCCD at 326, no go with any other BIOS.



Edit: So far so good, was able to dropped the vcore and tighten the timing a bit