The problem is probably your PSU's 3.3v line. You usually need your 3.3v line to be 0.2v above your Vdimm
Sorry, I didn't see your edit. You should be able to adapt this for your board (connecting pin 7 of the Dimm slot to the 3.3v line).
The problem is probably your PSU's 3.3v line. You usually need your 3.3v line to be 0.2v above your Vdimm
Sorry, I didn't see your edit. You should be able to adapt this for your board (connecting pin 7 of the Dimm slot to the 3.3v line).
Last edited by persivore; 04-08-2005 at 01:28 AM.
Posting Permissions
Reply With Quote
Bookmarks