P4 2.4 B @ 3,6 is that good?

[Srecko]

http://valid.x86-secret.com/show_oc?id=10512

[craig588]

No, take it faster, just because we use a base 10 number system and hitting 200FSB happens to be a milestone don't stop there.

[Srecko]

It's not good?

I have a problem it is not running stable,what can i do,i think i did everything possible,if you have some idea please post it?

Thanks

[Gogeta]

That's pretty freakin' good. I've seen a 2.4b at 3.8, but 1200MHz is definitely not a bad OC for a Northwood. Back before Intel released the 800MHz Northwoods, I had a C1 stepping 2.4b that could only load the BIOS at 3.6GHz. Anything over 3.4 wasn't stable in windows. I was on the Abit BH7 (i845PE) with low-end custom watercooling though...I suppose the IC7 would probably make things a little more stable.

What voltage are you using? Have you modded that board at all?

[nCrusader]

First of all, what cooling are you using?
Second, if it's not stable, what's that clock worth then? Kami-screen, peak-shots, whatever we call them, they don't say much what the CPU really can do. Get it stable first.

I remember my old 2.4b, I could bench in PCMark and Sandra @ 186FSB (3360MHz) with simple watercooling but was only 100% stable at 3070MHz.

[lutjens]

Give it some voltage...

[Srecko]

I tried up to 1,9V core but it doesnt help its stable now at 3,4GHZ and 1,7V,im using zalman 7700-cu

[ppaassssaa]

I think it's good because you used air cooling and got +1200Mhz. =D
Next time on water! =P

[xooler]

My old 2.4C on C1 has brocken just 3.4Ghz =(
2.4B@3.6 it's good!

[xooler]

Oh..
i've forgotten my 2.4c run on stock air =)

[Gogeta]

My old 2.4C on C1 has brocken just 3.4Ghz =(
2.4B@3.6 it's good!

2.4C's started with D1 stepping chips. Then came the M0's. The last Northwood "B" stepping was C1.

If I recall the IC7 needs a few vmods before it starts to really shine. I know hipro wrote up a very extensive article on modding that board, and there should be a few threads in the vmod section as well. If you're willing to do the work, I think you'd be happy with the result, Srecko.

[Mcklain]

Pretty nice overclock on that chip.

Mcklain

[Srecko]

2.4C's started with D1 stepping chips. Then came the M0's. The last Northwood "B" stepping was C1.

If I recall the IC7 needs a few vmods before it starts to really shine. I know hipro wrote up a very extensive article on modding that board, and there should be a few threads in the vmod section as well. If you're willing to do the work, I think you'd be happy with the result, Srecko.

I would do it,a month ago i had a abit ic7 max3,but scratched the EPROM when installing coller ,i found nowere the same board just this normal Ic7 series

[perkam]

Ok first of all Srecko:

[size=3]WELCOME TO XS !!!!/size] :banana

Secondly, that is an amazing OC Though the records here on ln2 exceed 4.5Ghz, that is still a very good overclock, all u have to do is find a stable oc that u can run for 24/7 THough please do post some SuperPi and Sandra mem shots that helps quite a bit...just edit the first post with the Shots.

btw, nice avatar of Jean Luc Picard

Perkam

[Srecko]

Ok first of all Srecko:

[size=3]WELCOME TO XS !!!!/size] :banana

Secondly, that is an amazing OC Though the records here on ln2 exceed 4.5Ghz, that is still a very good overclock, all u have to do is find a stable oc that u can run for 24/7 THough please do post some SuperPi and Sandra mem shots that helps quite a bit...just edit the first post with the Shots.

btw, nice avatar of Jean Luc Picard

Perkam

http://forum.ocklub.net/viewtopic.ph...r=asc&start=15

Super PI 43 sec


Im a fan of star trek

[Srecko]

where can i find the vtt mod ?

[Lithan]

It's pretty decent, though I gotta admit it makes me miss my ol 2.26b. Sucker did 3933mhz Stable @ 1.60vcore on air cooling. This was more than a year ago if I remember right. Sad part is I didn't even sell it for a premium.

[Srecko]

I'm back

Now where can i find de vtt mod?

Thx

[forey]

i have the exact same cpu, exept i cant overclock past 2.5ghz without prime errors,
i have hynix 512mb ddr266/pc2100 ram can anyone tell me if thats good and how i can overclock it? nothing in bios about voltages/mem timings
wat am i to do to o/c ram

[Lithan]

On the other hand my c1 celly only does 2600mhz stable... so that's pretty decent if you ask me.

[totensiebush]

i have the exact same cpu, exept i cant overclock past 2.5ghz without prime errors,
i have hynix 512mb ddr266/pc2100 ram can anyone tell me if thats good and how i can overclock it? nothing in bios about voltages/mem timings
wat am i to do to o/c ram

It is likely your RAM, as you have to either set up a divider or OC it, and a lot of PC2100 RAM won't OC much at all.

[forey]

It is likely your RAM, as you have to either set up a divider or OC it, and a lot of PC2100 RAM won't OC much at all.

ok how do i set a divider ? and if there isnt any functions in bios its impossible to o/c ram?

[freecableguy]

Do NOT run 1.9V without PC...air and it will die within a few months, maybe sooner.