Greets All.. I have been meaning to join this forum for quite some time now but now i have finally got around to it! Just finished up this upgrade. I am now focused on Vmem and Vcore modding my Asus 9800xt. After i get some better mem and after this chips burns in for a while I hope to hit 4.2 DPS with it (it boots at 4.3 atm). All parts and specs are in sig.
Damn that's a really nice setup there. Very professional looking case.
Awesome setup, really great modding, looks Hipro style with the ridiculous Abit mods.
What are idle/load temps? Whatcha got for the watercooling hardware (ie: pump, blocks, rad, tubing size, etc)? Tried more voltage at all?
Formerly XIP, now just P.
Nice work.. I just dont know how you guys do it, all that fine soldering, amazes me everytime I see incredible work like that.. Great job on the case as well.
Originally Posted by Eradicator
Soldering really isnt all to hard if you have a good iron and semi-steady hands.
Great setup.. makes me want to mod my mobo as well..
arnt you the one that invented that droop mod you use on OCForums?
Nice job, it looks good...
...Reminds me that I have to break out the dremel and make some cuts in the back of my PC-75. Looks cleaner to route cables behind the mobo.
I just updated my Sig so all my temps and water cooling eqp are now listed there. +Awesome setup, really great modding, looks Hipro style with the ridiculous Abit mods.
What are idle/load temps? Whatcha got for the watercooling hardware (ie: pump, blocks, rad, tubing size, etc)? Tried more voltage at all?
Nope it was not me, Credit goes to a guy named woutertal. I have not seen him around in some time now.
||MY RIG PIX Here|| P4 3.2e @ 4015mhz Dual Prime Stable 24hr1.57v 1ghz FSB 1:1
Mods: ABIT IC7G Max2 - FET's Sinked-Capacitors Doubled-Vcore Droop Mod @ .012
Power: Enermax 460w +12v 33 Amps 12v @ 12.25 Unler Dual Prime load
Mem: 2x Corsair PC4000 PRO 512MB @ 250mhz 2.5-4-4-5 1.8v
Storage: 2 WD 36gb Raptor 10k in RAID 0
Storage: 2 Maxtor Diamondmax 10 300gb / 16mb JBOD for now =/
Video: Asus Radeon 9800XT 500/405 2V Core / 1.75v Mem (810)||Modded Vcore + VMem PIX Here||
Cooling: CPU-Innovatek Innovacool 3/8" Upgraded /GPU-Innovatek Graph-O-Matic v3 3/8" /Chipset DD Maze 4 3/8"
Temps CPU = 34c/40c GPU 34c/40 Chipset = 34c
Really nice work. Thanks for the pics.
that's just sick!
I like it!
What did you use to sink your mofets? FrozenCPU Moster BGA sinks or OCZ Copper BGA sinks?
Did you have to cut any of them down?
Thanks man
I used the OCZ Copper ones... On the back there was only one i had to dremel down a bit to make room for a solder point. Now that they have the two slim zalman fans blowing on them they never go over 40c even fully loaded
||MY RIG PIX Here|| P4 3.2e @ 4015mhz Dual Prime Stable 24hr
Mods: ABIT IC7G Max2 - FET's Sinked-Capacitors Doubled-Vcore Droop Mod @ .012
Power: Enermax 460w +12v 33 Amps 12v @ 12.25 Unler Dual Prime load
Mem: 2x Corsair PC4000 PRO 512MB @ 250mhz 2.5-4-4-5 1.8v
Storage: 2 WD 36gb Raptor 10k in RAID 0
Storage: 2 Maxtor Diamondmax 10 300gb / 16mb JBOD for now =/
Video: Asus Radeon 9800XT 500/405 2V Core / 1.75v Mem (810)||Modded Vcore + VMem PIX Here||
Cooling: CPU-Innovatek Innovacool 3/8" Upgraded /GPU-Innovatek Graph-O-Matic v3 3/8" /Chipset DD Maze 4 3/8"
Temps CPU = 34c/40c GPU 34c/40 Chipset = 34c
Posting Permissions
Reply With Quote
Bookmarks