Post your WORKING timings and voltages for DFI NF4 Ultra-D and SLI

[setyotomo]

Winchester
3200+ CBBFD 04321 TPMW water cooled
DFI NF4 ULTRA-D 2/18 beta bios
1x Gigabyte 6600GT
2x 512MB Twinmos Speed Premium AA4T 05064 / Twinmos m.tech UTT AA4T 05094 *same setting*
430W Antec TP

10 x 250mhz 2-2-2-5 1T
DRAM Voltage = 3.3v
chipset = 1.6v
LDT = 1.3v
LDT 4x

1.325 x 113% = 1.497v (bios) --> 1.46v (windows)

CPC = Enabled
CAS Latency(CL) = 2
RAS to CAS(Trcd) = 2
Min RAS# Active time(Tras) = 5
Row Precharge Time(Trp) = 2
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 16
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3120
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = Increase
Skew Value = 4
DRAM Drive Strength = Level 4
DRAM Data Drive Strength = Level 4
Max Async Latency = 7ns
Read Preamble Time = 5ns
Idle Cycle Limit = 256
Dynamic Counter = disabled
R/W Queue Bypass = 8x
Bypass Max = 16x
32 byte Granularity = Disable(8burst)