Someone from australia just brought a 3500+ 0505 with the followig details
ADA3500DEP4AS
CAA2C 0505FPMW
Now look at this chip: Any idea's? Anyone seen a CAA2C?
Someone from australia just brought a 3500+ 0505 with the followig details
ADA3500DEP4AS
CAA2C 0505FPMW
Now look at this chip: Any idea's? Anyone seen a CAA2C?
that should be a good one....but it IS an fx-55...
caaac is the best i have seen.
NO its a A64 3500+!
With that stepping!
The image is for comparison to the codes of a FX 55
well, lol, you see the stepping on a 3500, then sure, it's a true stepping. Thought fx-55's were clawhammers and 3500's winchesters tho.
some 3500's are new castles too :P
A64 3500+ Clawhammer c2AAc [260x10 stock volts] 2600MHz
MSI K8N Neo2 platinum 1.41 bios
2x512 OCZ PC3700 EL Platinum (2.5-3-3-7)
ATI X800 XT PE (520/560)
Creative Audigy 2 ZS
Maxtor 40GB PATA
OCZ 520W Modstream
Thermalright XP-90 w/ 92mm Vantec Tornado
ADA3500DEP4AS
is that a winchester stepping?
Its so new I cant see why it not should be
"M-I-A"
ADA3500DEP4AS is Sledgehammer (SH7-CG) with 512kb L2 cache.
I have whole box of those, and they are all week 42 of 2004 and with CAA2C code.
yeah but these are newer chips
looks like they've reverted back to newcastles?
image taken by T_M on ocau
ahh there you go told yah
the newer winnies must be that bad
lol
Stripped down FX53's these 3500's are. The cores likely have been stock piled (for the 4000+) at the assembly plant in Penang so they utilised them for the 3500+'s. Buys time till rev E's come out later this month or next.
sounds like it I got one yesterday and preliminary results
3500+ Newcastle CAA2C 0505 APMW
MSI K8N Neo2 0444A2 chipset with Corsair Hydrocool 200 cooled cpu
2x 256MB KHX3200K2/512 BH-5
80GB WD 800JB
550W GTR Black PSU 38A/12v rail
stock vcore 1.47 = 11x 250HTT = 2750mhz
max pifast passable
1.6v = 2835mhz
1.65v = 2866mhz
using divider to test cpu max limits
3dmarks ran in same windows session
Gecube 9800Pro Extreme stock speed @398/351
Last edited by eva2000; 03-11-2005 at 08:40 AM.
---
Yikes! Nice NC's! Where did you guys buy these from? I'd like to try my luck with one! Please name the retailer and when you purchased if possible. Any one with aircooling results yet?
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
Wait a sec...
Eva: Why do all the CPU-Z's read "Newcastle" but the Everest reads "Clawhammer"??
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
These seem to be a new type of CPU, ZipZoomFly now has two types of 130nm 3500+, one is the normal NewCastle:
ADA3500AWBOX
and the other is this strange one:
ADA3500ASBOX
NewEgg lists the core on this new ADA3500ASBOX chip as Clawhammer although it still has 512KB L2.
According to AMD's Technical Ref it should be a ClawHammer:
A=130nm, S= Hammer, 939
A=130nm, W= Newcastle, 939
You can tell by looking at the last two digits on the first line of the CPU, if they're AW its a regular NewCastle, if its AS, its one of these new mystery CPU's.
Yah, I went to Newegg, ZZF, and Monarch and noticed this as well. Also if you notice, it's only the the boxed versions all the OEM versions are still AS. Maybe the rumor is right and these guys are washed up FX-53's that they decided to put into use while they wait for Venice! Let me know, I want to order NOW!Originally Posted by HiJon89
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
How do these compare at the same clock speed to the Winchesters??
@Eva....is that prime stable??
here's a 4000+ I used to have........
nice eva! The new newcastles rocks!!
If u had better mems u would have less than 30sec!
nice job!
Does anyone knows anything about this:
ADA3500DEP4AS
CAA2C 0504GPMW
???
Sounds like a steal of a deal under $300 for a FX53 (sorta)
I wish I hadnt already spent way to much on PC parts in the last 3 months.
.................................................. .................................................. .............................................
[+] Abit AN8 Fatal1ty [+] A64 3500+ NC [+] XP120 [+] 2x256 G.Skill DDR600 "LA" [+] MSI 6600GT [+] OCZ 420w Powerstream [+]
.................................................. .................................................. .............................................
take the cpu it's worth the risk! i do have better mem that's just testing the cpu max taking mem out of the equation the ram can do 273-275mhz 2-2-2-6Originally Posted by SlotKiller
---
What do you guys think about these: ADA3500ASBOX ?Originally Posted by eva2000
This should just be the ADA3500DEP4AS with a HSF and 3-year warranty, correct?
Oh man, someone confirm this and I'll order one ASAP. Hopefully get here early next week!
DFI nF4 Ultra-D
1 GB of OCZ PC3700EL Platinum TCCD
AMD 3500+ Clawhammer (XP-120)
eVGA 6200 -> 6600 softmod
eva, i am really waiting for a spi 1mb and 32mb with mems @262 2-2-2!!!
could you tell me how high you o/c with the stock HSF???
thanx
I dont get why they went back to .13 micron.
Bookmarks