DFI NF4 Ultra/SLi-D BUGS and Fixes Thread

[ominae]

Yesterday I got my DFI Ultra-D and installed everything. It all went fine and I left the computer on overnight to transfer some files to it, and this morning everything was still working fine. I started installing important programs such as Norton Antivirus 2005 and ISS Blackice. Once I was done installing blackice I was surfing around on the internet and suddenly the BSOD appears and the computer reboots. I heard a short signal from the motherboard while this happens, and another one when the computer boots up again. I got into windows again and I sit there looking at the desktop for a while. After a while the bluescreen reappears and the computer reboots again. I decided to raise VDimm to 3.2 for my VX and boot the computer again. Now the BSOD randomly appears after logging into Windows, but sometimes it does not. Please help

All settings in bios are at standard except for the vdimm voltage. I'm using bios 1/25. I am using the chipset drivers included on the cd that came with the motherboard. It appears the BSOD always appears again after a while, not always after the log in.

Hey, I've started getting the same thing!! Initially I had the 4-pin molex power connector plugged in, and everything was fine - i took it out, and then this started happening *I think*, so I've plugged it back in, and am still testing to see if it will crash.... Give it a try

[VoRtAn_MaDgE]

Anyone tried going up more then 3,8v?

At 3,9 windows won't boot...if i change to 3,8v everything works like a charm!

Tried boot at default, boot with oc, boot with default settings then change with a64tweaker, boot with different timmings, try raising the 12/5/3,3v rails of my 465 enermax the same, LDT and Chipste voltage max, pci-ex at 105 (ati card) none of this works...

Any idea?

btw does it worth buying a 20 to 24 atx pin adapter to use? I know this is not the reason why 3,9v aren't working cuzz i have a friend with the same problem with a 520w ocz psu...

Got to try 3,9 and 4v to see if my bh-5 scale a little more

[snowice]

got a question. does anyone know what the pci express frequency is for in the bios? it's default setting is 100mhz, and you can up it to 400 somthing. has anyone messed with it? i've seen someone set it to 103. dont know why tho.