Page 1 of 4 1234 LastLast
Results 1 to 25 of 76

Thread: Waiting to buy TCCD---Well Don't!!

  1. #1
    Xtreme Member
    Join Date
    Dec 2002
    Posts
    203

    Waiting to buy TCCD---Well Don't!!

    Pretty much all the TCCD has been snatched up by all the ram manufacturers. Thus leaving only the stock that they have left. I have heard this information from a couple of different sources that are definitely reliable. So if you were waiting to get TCCD, or if you have some but would like to get a few more, don't wait too long or you will pass up the opportunity to buy it. Once manufacturers stock is gone, you most likely will not be able to get it anymore.

    I got mine.....do you have yours???
    C2D E6600 week 25, cooled by Scythe Mine, on EVGA 680i T1 (P28), 2x1gb OCZ PC8000, EVGA 8800GTS

  2. #2
    Xtreme Member
    Join Date
    Dec 2004
    Location
    Czech Rep.
    Posts
    1,322
    But Samsung will make more, won't they?
    "Strive for perfection in everything you do. Take the best that exists and make it better. When it does not exist, design it." - Sir Henry Royce

  3. #3
    Xtreme Member
    Join Date
    Dec 2002
    Posts
    203
    They might make more, but remember...... not all die turn out the same..... ch-5 was the bh-5 die replacement......which would you rather have?
    C2D E6600 week 25, cooled by Scythe Mine, on EVGA 680i T1 (P28), 2x1gb OCZ PC8000, EVGA 8800GTS

  4. #4
    Xtreme Member
    Join Date
    Dec 2004
    Location
    Czech Rep.
    Posts
    1,322
    Yeah, that's true. But aren't the 440 after the 437? And both perform well.
    "Strive for perfection in everything you do. Take the best that exists and make it better. When it does not exist, design it." - Sir Henry Royce

  5. #5
    Xtreme Member
    Join Date
    Dec 2002
    Posts
    203
    Ok true.....but they only ran the die for so many weeks...... say the last batch was 445 or so......it's now 506.....that's almost 2 months of them not making any more.
    C2D E6600 week 25, cooled by Scythe Mine, on EVGA 680i T1 (P28), 2x1gb OCZ PC8000, EVGA 8800GTS

  6. #6
    the jedi master
    Join Date
    Jun 2002
    Location
    Manchester uk/Sunnyvale CA
    Posts
    3,884
    TCCD looks to be gone the way of the dodo guys, thats pretty much what i am hearing. There won't be anymore either.
    Got a problem with your OCZ product....?
    Have a look over here
    Tony AKA BigToe


    Tuning PC's for speed...Run whats fast, not what you think is fast

  7. #7
    Xtreme Enthusiast
    Join Date
    Mar 2004
    Posts
    532
    damnation.....this happens right when i am torn between some VX and G.Skill TCCD (sorry OCZ...4200plat is too damn expensive :p)

    got any advice guys? think its a good idea to go after the dieing breed because i was 70% sure on the VX

  8. #8
    Xtreme Member
    Join Date
    Dec 2004
    Location
    Czech Rep.
    Posts
    1,322
    M-u-s-t B-u-y T-c-c-d...!
    "Strive for perfection in everything you do. Take the best that exists and make it better. When it does not exist, design it." - Sir Henry Royce

  9. #9
    Xtreme 3DTeam Member
    Join Date
    Jan 2005
    Location
    AMD factory
    Posts
    2,288
    Pretty sure there will come something better these days, maybe TCCE ?

    Previous system:


    DFI NF4 ULTRA 0453A3 KOREA CHIPSET / BIOS 510-2FIX / FX-57 0516WPMW@3.62GHZ / 2x256 CORSAIR 3200LLPT BH-5@13x278MHZ 2-2-2-5@3.69VDIMM / MACH II GT@MOD BY BERKUT / ACTIVE COOLING FOR RAM - MOSFETS - GPU RAM / CHIPSET & GPU CORE WATERCOOLED / OCZ POWERSTEAM 600W / BUILT BY ATI X850XT@660/651 - VGPU@1.73-VDD@2.26-VDDQ@2.21 PENCIL MOD / WIN XP 2x80GB SAMSUNG SPINPOINT SP80 SATA - RAID 0 & WIN 2K 40GB SAMSUNG SPINPOINT SP40 IDE BENCH DRIVE / PIC


    ----------------><------------------

  10. #10
    Xtreme Enthusiast
    Join Date
    Mar 2004
    Posts
    532
    newegg has the 2x512 LA's in stock......seem to be 440's

    i am confused

  11. #11
    Xtreme Enthusiast
    Join Date
    May 2003
    Posts
    660
    I would definitely get TCCD over VX. I've ran some benchies for myself whether 245 at 5-2-2-2 at 166Mhzis faster thanr 300 at 2.5-3-3-7 1:1 at the same clockspeeds (2.7Ghz) and I'd always get better results running 1:1. VX is only good if you have an FX processor that can let you adjust multis so you can always run 1:1.

  12. #12
    XS Intel News & D²OL enhanced
    Join Date
    Nov 2003
    Location
    Netherlands
    Posts
    2,205
    Quote Originally Posted by bigtoe
    TCCD looks to be gone the way of the dodo guys, thats pretty much what i am hearing. There won't be anymore either.

    wth?? why is samsung moveing to ddr2?

  13. #13
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,656
    Hope this helps some.

    Compusa is selling Centon DDR for 30% off this week.

    http://image.compusa.com/retail/emai...last_377fl.pdf
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  14. #14
    Xtreme Member
    Join Date
    Nov 2004
    Location
    Keller, TX
    Posts
    456
    Quote Originally Posted by enzoR
    wth?? why is samsung moveing to ddr2?


    thats why.

    glad I got my ocz rev 2 when i did hehe.

  15. #15
    Xtreme Member
    Join Date
    Sep 2004
    Posts
    117
    Quote Originally Posted by FUGGER
    Hope this helps some.

    Compusa is selling Centon DDR for 30% off this week.

    http://image.compusa.com/retail/emai...last_377fl.pdf
    Is this the TCCD?

    http://www.compusa.com/products/prod...781&pfp=SEARCH
    A64 3400 @ 2700 [270x10] (air)
    DFI UT
    bh-5 @ 270 A64 Tweaked
    9800p @ 480/425

  16. #16
    Xtreme Addict
    Join Date
    Jan 2004
    Location
    Manchester (UK)
    Posts
    1,105
    Alright, got to stock up on some Gskill

    LE's are best for all round right ?

    OPB, need your guidence
    Last edited by Bennah; 02-08-2005 at 03:39 PM.

  17. #17
    Xtreme Addict
    Join Date
    Jan 2004
    Location
    somewhere in Massachusetts
    Posts
    1,009
    Ditto what mag said, CompUSA doesn't give enough info about what RAM they have.

    If I looked at it in the store would it say TCCD on the chips?

    thanks, if this is a yes I'm there in a flash :p

  18. #18
    Memory Addict
    Join Date
    Aug 2002
    Location
    Brisbane, Australia
    Posts
    11,651
    Quote Originally Posted by bigtoe
    TCCD looks to be gone the way of the dodo guys, thats pretty much what i am hearing. There won't be anymore either.
    ouch... maybe next stuff out will be even better ?
    ---

  19. #19
    Xtreme X.I.P.
    Join Date
    Aug 2004
    Location
    Chile
    Posts
    4,151
    i dont think it is becouse of the new processors they arent out for a year, and there is also lots of people that wont upgrade as fast.


    i think they are making something better, plus bh5 is coming out again

  20. #20
    Xtreme Member
    Join Date
    Jan 2005
    Location
    Auckland, NZ
    Posts
    311
    I've been waiting. But not anymore, I'm not taking my chances.
    Time to order that Ultra X I've been eyeing up..
    No rig right now.

  21. #21
    Xtreme Addict
    Join Date
    Apr 2004
    Location
    Auckland, New Zealand
    Posts
    1,012
    HHmmm hopefully the Infineon/Winbond group will come to the party with something even better soon... and I'm sure Samsung still want their fingers in the DDR pie...
    VX/UTT Voltage Scaling, please contribute...

    10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE

    Mobile 3400+ CG 0437XDPW
    DFI LanParty UT
    XP120 w/ 120mm Thermaltake Thunderblade
    2x512MB OCZ VX
    BBATI 9800np w/Infineon
    PC Power & Cooling 510w Deluxe

  22. #22
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Location
    Cornwall/Leeds UK
    Posts
    970
    ARgh dammit, NEARLY got a gig of XBL the other week for 140 quid too... GUTTED
    .:. X2 @ 2.9 .:. E6600 L628 @ 4.73 .:. AB9 @ 512 FSB .:. E6300 @ 100% OC Stable

    U.K. overclockers: Represent your country, bench for EP-UK! Unite and show the world there IS a U.K. scene!



  23. #23
    Xtreme Recruit
    Join Date
    Apr 2004
    Location
    Croatia
    Posts
    85
    DDR2 on AMD???Whith those timings, yuck!
    Death is just a state of mind!

    DFI LanPartyUT nF4-UltraD, R.AD0 NBw.TR HR05-SLI+Glacial tech 92mm fan
    Venice 3000+, NBBWE 0601 (255×9) GPMW TT Sonic tower + noiseblocker 120mm,
    2×512MB Corsair 3200XL TCCD+BP PCB
    GeCube X1950XT,256MB, cooled by Zalman Vf700CU-water cooling under constuction
    Hitachi Deskstar T7K250, 250GB SATA II, 8MB cache
    Samsung SpinPoint S120 SP2504c 250GB SATA II, 8MB cache
    Seagate Barracuda 7 80GB, PATA, 2MB cache, 7200rpm in Metal Gear box
    BenQ DVD-1650, DL DVD-RW
    NEC ND-3520AW DL DVD-RW,
    Enhance ENS-0252A, EPS12V, 520W. moded to have a 120mm fan istead of the second 80mm. Ultra Monster
    Casetek 1018+120mm blowhole on top
    iiyama Vision Master pro 454

  24. #24
    Xtreme Addict
    Join Date
    Jan 2004
    Location
    somewhere in Massachusetts
    Posts
    1,009
    Jesus, Patriot and OCZ have done 3-2-2-4 timings for DDR2-533... IMO thats not that bad at all.

  25. #25
    Xtreme Guru
    Join Date
    Jul 2004
    Location
    10009
    Posts
    3,628
    Who wants tccd when you can have UTT for 1/2 the price?

Page 1 of 4 1234 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •