DFI NF4 Ultra/SLi-D BUGS and Fixes Thread

[split]

Seeing as you have stickied this, thought I might gather some info for the thread regarding the XP-120.

Seems it fits depending on orientation, and some thought must be given to ram height.

With pipes facing the gfx:
All 4 slots usable, though max ram height is about 40mm, are your modules taller you just can't fit them under there. And if your rams are taller then about 32mm you can't mount them after HS is mounted, and due to the way the HS is mounted (you tip it over towards the slots to get those hooks in the holder) it's going to be quite hard to mount it when rams are already in slots.

Pros: All 4 slots can be populated
Cons: Max ram height is 40mm for slot 3 & 4


With pipes facing the slots:
Slot 1-3 can now be populated with ram with any height. But HS is going to be close to the gfx which could lead to problem with some third parts cooling for gfx. And slot 4 cannot hold any ram, not even low profile.

Pros: slot 3 can now hold high ram modules
Cons: Slot 4 cannot hold any module at all and HS is very close to gfx.