Take a guess for this screen shot

[Onepagebook]

1.cpu speed: 3200mhz(FX55)
2.from the screen, we can see: L1 cache bandwidth: 26230mb/s
L2 cache bandwidth: 6517mb/s
** memory banwidth: 2718mb/s

it's 2x512, Dual channel, of course chipset is NF4, that's why memtest 86+ 1.40 still can't recognize that!
It's easily to see if that's dual or single channel! Also the RAM timing. Just take guess
1. what is the fsb setting?
2. what is the memory timing I set for this testing?

[Arnar]

Just a wild guess.

10x320 and 2.5-3-3-7 ?

[EDIT]: btw. nice monitor, apple lcd

[conrad.maranan]

Memtest bandwidth looks a little bit low. I'll guess 10x320MHz on the CPU side, memory running 1:1 in dual channel at 3-4-4 1T.

So, what's the correct answer?

[Onepagebook]

AArnar,
yes it's aplle 23"LCD
Very closed

Conrad..
wrong answer..that bandwidth is high not low...

[Arnar]

Was I close?

320mhz, 3-3-3-7 ?

[Rabbi_NZ]

10x320 2.5-3-4-6 1T?

Does the right guess get your RAM? hehehehe

[Onepagebook]

Was I close?

320mhz, 3-3-3-7 ?

if I can go CL 2.5, I don't need to set CL3 right? and if CL3, then the bandwidth would n't be 2718mb under 3.2g(yes 320x10 is the answer)...

[Arnar]

Just thinking.

Will that 2x512mb @ 320mhz (2.5-3-3-7 ?) kill 2x512mb BH-5 @ 260mhz 2-2-2-5.

And isnt it almost guaranteed you can get 320htt with the DFi board?

Im thinking of getting some tccd

[conrad.maranan]

Conrad..
wrong answer..that bandwidth is high not low...

Well, I meant that it wasn't super high. Since you're considered to be one of the elite OC gods, I was expecting to see 3200MB/s...hahaha. Anyway, 320MHz is really nice. I hope to do that with my next G.Skill purchase.

Here's almost 3000MB/s with 258MHz.

[Onepagebook]

Well, I meant that it wasn't super high. Since you're considered to be one of the elite OC gods, I was expecting to see 3200MB/s...hahaha. Anyway, 320MHz is really nice. I hope to do that with my next G.Skill purchase.

Here's almost 3000MB/s with 258MHz.

nah, I am not the OC god..

Well, 3000mb/s with 258, 2-2-2 that's about that number! Great Job!

OPB

[Rabbi_NZ]

Dont FX chips show lower bandwidth in MemTest for some reason?

[conrad.maranan]

nah, I am not the OC god..

Stop lying to us. You are an OC god. By the way, what G.Skill modules did you use for the screenshot?

[Onepagebook]

Rabbi,
I think we will need to wait until the version that memtest support NF4 and see what happen.

Conrad. This is LE w/ 437 week IC

[CrimeDog]

320mhz 2.5-4-3-7 no?

[Onepagebook]

320mhz 2.5-4-3-7 no?

This is the right answer!

[WesM63]

Is that a memtest+ only option? I don't remember seeing it in my memtest version.


BTW, Nice bandwidth

[bachus_anonym]

DDR640 7-3-4-2.5 1T out of 2x512MB PC4400 LE and FX-55 ??? Nice

That memory bandwidth is on a "bit" low side, though.... I wonder how would that translate to other benchmarks comparing to e.g. this:



Winnie 3200+, 2x512MB OCZ VX DDR522 6-2-2-2.0-1T - 3000MB/s - some kind of "freak" error sneaked in but it's stable enough for SuperPi 32M, some Prime95 and 3D action

[CrimeDog]

This is the right answer!

suprised others don't watch your overclocking threads as intently

great job OPB you've given me a lot of entertainment on these forums

[Onepagebook]

DDR640 7-3-4-2.5 1T out of 2x512MB PC4400 LE and FX-55 ??? Nice

That memory bandwidth is on a "bit" low side, though.... I wonder how would that translate to other benchmarks comparing to e.g. this:



Winnie 3200+, 2x512MB OCZ VX DDR522 6-2-2-2.0-1T - 3000MB/s - some kind of "freak" error sneaked in but it's stable enough for SuperPi 32M, some Prime95 and 3D action

Totally agree, this one is also a nice result, no doubt

OPB

[Supertim0r]

DDR640 7-3-4-2.5 1T out of 2x512MB PC4400 LE and FX-55 ??? Nice

That memory bandwidth is on a "bit" low side, though.... I wonder how would that translate to other benchmarks comparing to e.g. this:



Winnie 3200+, 2x512MB OCZ VX DDR522 6-2-2-2.0-1T - 3000MB/s - some kind of "freak" error sneaked in but it's stable enough for SuperPi 32M, some Prime95 and 3D action

voltage ?

[MaxxxRacer]

nice results there opb. now show us some sandra or everest.

[SLN]

Nice work OPB
I will have some "LE" coming my way (hopefully soon). Basically I am going to answer this question myself (and have fun in the process) when it gets here but I have to ask... Does the majority of LE 437 go there (provided it's not limited by the mobo/mem controller of course) or did the... OC king /GSkill Rep went through a couple of dozen modules before finding these...

[Onepagebook]

Nice work OPB
I will have some "LE" coming my way (hopefully soon). Basically I am going to answer this question myself (and have fun in the process) when it gets here but I have to ask... Does the majority of LE 437 go there (provided it's not limited by the mobo/mem controller of course) or did the... OC king /GSkill Rep went through a couple of dozen modules before finding these...

lol, no, I did not go through that much, I only have 2 modules in hand
1 is 0440, and this 0437.
Honestly, I would say, 0431 is not that good percentage for doing DDR600 1t or over DDR600 1t.
It's the problem how many percentage for gskill can hand pick the modules to meet the standard or even higher to fulfill most overclockers.
0437 and 0440 IC are just the high percentage IC for doing hand pick! They are about the same. Not the big difference though.

OPB

[HARDCORECLOCKER]

nah, I am not the OC god..

Well, 3000mb/s with 258, 2-2-2 that's about that number! Great Job!

OPB

Haha - funny joke..............

[NiSMo]

i got some LE sticks coming my way soon, i hope they are as good o/cers as urs....
btw thats unbeleivable, congrats!!